• JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
 
  Bookmark and Share
 
 
Doctoral Thesis
DOI
https://doi.org/10.11606/T.76.2006.tde-19092007-100742
Document
Author
Full name
Ronaldo Santos da Silva
Institute/School/College
Knowledge Area
Date of Defense
Published
São Carlos, 2006
Supervisor
Committee
Hernandes, Antonio Carlos (President)
Leite, Edson Roberto
Miranda, Paulo Barbeitas
Moreira, Roberto Luiz
Zanatta, Antonio Ricardo
Title in Portuguese
Síntese e propriedades dielétricas de cerâmicas nanoestruturadas de Ba1xCaxTiO3 (0 menor igual x menor igual 0.30) sinterizadas a laser
Keywords in Portuguese
Dielétrico
Espectroscopia de impedância
Ferroelétrico
Nanocerâmicas
Pechini
Sinterização a laser
Titanato de bário e cálcio
Abstract in Portuguese
Pós nanocristalinos de Ba1-xCaxTiO3(0≤ x ≤ 0.30) foram sintetizados pela primeira vez por meio do método dos precursores poliméricos modificados, em temperaturas relativamente baixas (500°C). Para a densificação dos corpos cerâmicos duas técnicas distintas foram utilizadas: a sinterização convencional, utilizando um forno elétrico; e a sinterização a laser, na qual um laser de CO2 foi utilizado como principal fonte de calor. Os corpos cerâmicos sinterizados pelas duas técnicas apresentaram um tamanho médio de grãos em torno de 500 nm, porém uma maior densidade relativa foi obtida nas cerâmicas sinterizadas a laser, chegando a 99%, além de boa transparência, ∼42% a 940 nm para a amostra com 30 mol% de Ca com espessura de 0.5 mm. Também verificamos por meio de simulação numérica, que a equação de condução de calor na aproximação linear, considerando uma fonte de calor com perfil gaussiano, descreve qualitativamente o comportamento observado durante a sinterização a laser no seu estágio final. Por meio da técnica de espectroscopia de impedância foi feita a caracterização dielétrica dos corpos cerâmicos, nos quais três pontos principais foram estudados: i) o efeito do tamanho de grãos; ii) a influência da concentração de Ca; e iii) a influência do método de sinterização. Com a variação do tamanho do grão foram observadas mudanças na intensidade do pico de transição ferro-paraelétrica, na temperatura de Curie e na permissividade relativa à temperatura ambiente. Para concentrações de Ca até 15 mol%, as cerâmicas apresentaram uma transição de Curie estreita semelhante ao BaTiO3,enquanto que para concentrações maiores, uma transição de fase difusa foi observada. A sinterização a laser resultou em corpos cerâmicos com constante dielétrica 30% maior, e menor perda dielétrica do que as cerâmicas sinterizadas convencionalmente. Finalmente, foi proposto um modelo baseando-se na formação de vacâncias de oxigênio para o aumento da condutividade elétrica com a substituição de Ca.
Title in English
Synthesis and dielectric properties of the lase sintered Ba1-xCaxTiO3 (0 ≤ x ≤ 0.30) nanostructured ceramics
Keywords in English
Barium calcium titanate
Dieletric
Ferroelectric.
Impedance spectroscopy
Lase sintering
Nanocerâmics
Pechini
Abstract in English
Ba1-xCaxTiO3 (0 ≤ x ≤ 0.30) nanocrystalline powders were successfully synthesized for the first time at relative low temperature (500 °C) by a modified polymeric precursor method. The densification of the ceramics was made by two distinct techniques: conventional sintering using an electric furnace; and by a laser sintering process in which a CO2 laser is used as the main heating source. It was achieved dense ceramics with an average grain size about 500 nm from both techniques. However, the laser sintered ceramics presented a higher relative density (99 %) and a transparency of 42% at 940 nm in the sample with 30 mol% of Ca. By numerical simulation of the thermal conduction equation on the linear approximation case and taking account a thermal source with a gaussian profile, it was possible to describe qualitatively the final stage of the laser sintering process. The dielectric characterization of the ceramic bodies were carried out by the impedance spectroscopy technique and three main effects were studied: i) the grain size effect; ii) the Ca concentration influence; and, iii) the sintering technique influence. Modifying the grain size led to changes in the ferro-paraelectric transition magnitude, on the Curie temperature value and in the relative permittivity at room temperature. For Ca2+ concentrations up to 15 mol% the sintered ceramics presented a sharp Curie transition like BaTiO3,while for higher Ca concentrations a diffuse phase transition was observed. The laser sintered ceramics presented a dielectric constant 30% higher than the conventional sintering and a lower dielectric loss. Finally, we have proposed a model based on the oxygen vacancies formation to explain the conductivity increase with the Ca2+ substitution.
 
WARNING - Viewing this document is conditioned on your acceptance of the following terms of use:
This document is only for private use for research and teaching activities. Reproduction for commercial use is forbidden. This rights cover the whole data about this document as well as its contents. Any uses or copies of this document in whole or in part must include the author's name.
RonaldoSilva.pdf (9.11 Mbytes)
Publishing Date
2007-09-21
 
WARNING: Learn what derived works are clicking here.
All rights of the thesis/dissertation are from the authors
CeTI-SC/STI
Digital Library of Theses and Dissertations of USP. Copyright © 2001-2024. All rights reserved.