• JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
 
  Bookmark and Share
 
 
Doctoral Thesis
DOI
https://doi.org/10.11606/T.43.2005.tde-29092005-132047
Document
Author
Full name
António Manuel Marques Fonseca
E-mail
Institute/School/College
Knowledge Area
Date of Defense
Published
São Paulo, 2005
Supervisor
Committee
Silva, Ruy Pepe da (President)
Berni, Luiz Ângelo
Rosa, Paulo Ricardo da Silva
Ueda, Mário
Vannucci, Alvaro
Title in Portuguese
"Emissão Eletrociclotrônica no Tokamak TCABR: Um Estudo Experimental"
Keywords in Portuguese
condução de calor
diagnósticos de plasmas
física dos Plasmas
instabilidades magnetohidrodinâmicas
meios dielétricos
radiômetria
tokamaks
Abstract in Portuguese
Descreve-se neste trabalho um estudo experimental da Emissão Eletrociclotrônica (EEC) no tokamak TCABR. Um radiômetro de EEC foi instalado, calibrado e utilizado para o estudo do plasma em descargas térmicas. O radiômetro é do tipo heteródino de varredura operando na faixa de 50-85 GHz, no modo extraordinário e na segunda harmônica. Determinou-se a temperatura de ruído do radiômetro e também sua estabilidade em amplitude e freqüência. Foi medida a largura de banda em freqüência do radiômetro (resolução espacial horizontal). A antena utilizada é do tipo gaussiana sendo que o raio da cintura do feixe gaussiano e a posição do foco foram experimentalmente determinados (W0 ~ 1 cm e d ~ 37 cm, respectivamente). A posição da cintura da antena foi posicionada próxima do centro geométrico do vaso. Foi feita a calibração absoluta do equipamento considerando-se os efeitos das janelas de diagnóstico (reflexão e absorção). O sistema pode operar em modo varredura, para a obtenção de perfis radiais de Te ou modo freqüência única onde se tem alta resolução temporal. As medidas da radiação EC foram feitas, na sua maioria, em descargas com densidade eletrônica média entre 1.10+19 m-3 e 1,5.1019 m-3 de forma a se ter acessibilidade da radiação EC e também minimizar-se a presença de elétrons fugitivos. Para ne > 1,5.1019 m-3 (com B0 = 1,14 T) verifica-se o corte parcial da radiação EC. Nesta condição, o corte na EEC foi utilizado na determinação do perfil radial da densidade eletrônica e aplicado em três diferentes situações: descargas com injeção adicional de gás, com a aplicação do eletrodo de polarização e em descargas com injeção de ondas de radiofreqüência na região das ondas de Alfvén para o TCABR. Usando um perfil parabólico típico para a densidade eletrônica, observou-se que, para descargas com injeção adicional de gás ou em descargas com a aplicação de ondas de radiofreqüência tem-se 0,85 < alfa < 1, e para descargas com aplicação do eletrodo de polarização obteve-se alfa ~ 0,6. Foram feitas observações simultâneas da temperatura eletrônica, a partir do sinal da EEC, e das oscilações de Mirnov (freqüência ~ 11,7 kHz) em descargas térmicas com q(r=0) > 1. Os resultados indicam a presença de um modo de ruptura dominante em rs ~ 9,5 cm com a largura da ilha magnética de W ~ 2,0-2,5 cm. Estes resultados experimentais obtidos estão em acordo com os resultados indicados por teorias de transporte na região das ilhas magnéticas. Observou-se também que a localização da ilha magnética coincide com uma região onde o perfil radial da temperatura de plasma é aproximadamente plano. Num outro cenário, com q(r=0) < 1, observaram-se oscilações dente de serra com período de ~ 0,44 ms, tempo de queda de ~ 0,12 ms, e raio de inversão em r ~ 4 cm. Neste tipo de descargas observou-se que, no perfil radial da amplitude das oscilações da Te, |DeltaTe|, devido à propagação dos pulsos dente de serra, apresentavam posições de mínimos e que estes coincidiam com as posições onde ocorrem patamares no perfil radial da temperatura eletrônica. Partindo destes resultados, juntamente com o perfil de q(r), dão-nos os modos racionais (m/n), posições (r) e larguras(W) para as ilhas magnéticas, presentes nestas descargas, a saber: m/n = 4/3 (r ~ 9 cm, W4/3 ~ 0,9 cm), m/n = 3/2 (r ~ 11,8 cm, W3/2 ~ 0,9 cm) e m/n = 2/1 (r ~ 13,7 cm, W2/1 ~ 1,4 cm). Este novo método, aqui proposto, permite a determinação direta da posição e da largura das ilhas magnéticas, em descargas onde a instabilidade dente de serra encontra-se presente.¶
Title in English
Electron Cyclotron Emission in the TCABR Tokamak: An Experimental Study.
Keywords in English
diagnostics
dielectric medium
heat conduction
magnetohydrodinamics instabilities
plasma physics
radiometry
tokamaks
Abstract in English
In this work, an experimental study of the Electron Cyclotron Emission (ECE) in the TCABR Tokamak, is described. An ECE sweeping heterodyne radiometer, operating in the 50-85 GHz frequency range, was installed, calibrated and used to detect ECE radiation in the second harmonic extraordinary mode from thermal plasma discharges. The noise temperature, amplitude and frequency stability of the radiometer were determined. The frequency bandwidth (horizontal space resolution) was measured. A Gaussian Antenna is used and the gaussian beam waist radius (W0 ~ 1 cm) and the focus position (d ~ 37 cm) were experimentally determined. The focus of the antenna was positioned close to the center of the vacuum vessel. The absolute calibration of the equipment was done and the effect of the diagnostic window was considered (reflections and absorptions). The system can operate in sweeping mode, in order to obtain the radial electron temperature profiles, and also in the single frequency mode to obtain temporal electron temperature profiles with high time resolution. Due to the TCABR accessibility conditions and also to avoid runaway electrons, most of the ECE measurements were obtained in discharges with line electron density between 1.0x10+19 m-3 and 1.5x1019 m-3. For ne > 1.5x1019 m-3 (with B0 = 1.14 T) the cutoff in the ECE radiation was observed. The ECE cutoff was used to determine the radial profile of the electron density and applied to three different situations: discharges with additional gas puffing, with the application of a biasing electrode and in discharges with radio-frequency wave injection. Using a parabolic profile it was observed that, 0.85 < alfa < 1.0 for discharges with additional gas injection or with RF injection, and alfa ~ 0.6 for the electrode biasing experiments. The electron temperature profiles and Mirnov oscillations (f ~ 11.7 kHz) were simultaneously measured in discharges with q (r=0) > 1. The position and the width of the magnetic island were therefore calculated. The results indicate the presence of a dominant tearing mode in rs ~ 9.5 cm and the magnetic island width W ~ 2.0-2.5 cm. These experimental results are in agreement with the theoretical results foreseen by models of heat transport in the presence of magnetic islands. It was also observed that, the position of the magnetic island coincided with the region where the temperature radial profile is approximately flat. In another plasma scenario, with q(r=0) < 1, sawteeth oscillations with a period ~ 0.44 ms, crash time ~ 0.12 ms, inversion radius r ~ 4 cm, were measured. Peculiarities in the Te radial profile associated with the amplitude of Te oscillations, |DeltaTe|, due to the sawtooth instability, were observed. It was verified that the minimum values of the |DeltaTe| profile coincided with the region where the temperature radial profile was approximately flat. These results together with the q(r) profile yielded the following mode numbers (m/n), positions (r) and widths (W) of the magnetic islands: m/n = 4/3 (r ~ 9 cm, W4/3 ~ 0.9 cm), m/n = 3/2 (r ~ 11.8 cm, W3/2 ~ 0.9 cm) and m/n = 2/1 (r ~ 13.7 cm, W2/1; ~ 1.4 cm). A novel method to determine the position and width of the magnetic islands, in discharges with the presence of sawtooth instability, is presented here.
 
WARNING - Viewing this document is conditioned on your acceptance of the following terms of use:
This document is only for private use for research and teaching activities. Reproduction for commercial use is forbidden. This rights cover the whole data about this document as well as its contents. Any uses or copies of this document in whole or in part must include the author's name.
Publishing Date
2005-10-07
 
WARNING: Learn what derived works are clicking here.
All rights of the thesis/dissertation are from the authors
CeTI-SC/STI
Digital Library of Theses and Dissertations of USP. Copyright © 2001-2024. All rights reserved.