• JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
 
  Bookmark and Share
 
 
Master's Dissertation
DOI
https://doi.org/10.11606/D.3.2006.tde-17112006-145448
Document
Author
Full name
Wagner Shin Nishitani
E-mail
Institute/School/College
Knowledge Area
Date of Defense
Published
São Paulo, 2006
Supervisor
Committee
Silva, Emílio Carlos Nelli (President)
Alves, Marcelo Krajnc
Driemeier, Larissa
Title in Portuguese
Projeto de micromecanismos multifásicos usando o método da otimização topológica.
Keywords in Portuguese
Mecanismos
Método dos elementos finitos
Otimização topológica
Sistemas microeletromecânicos
Abstract in Portuguese
Um micromecanismo é, essencialmente, um dispositivo de dimensões milimétricas ou até micrométricas que executa uma tarefa específica como atuar como garra, pinça, grampo, etc. Quando acoplados a um sistema eletrônico, são chamados de sistemas microeletromecânicos ou "Micro-Electro-Mechanical Systems" (MEMS). Esses dispositivos são quase todos constituídos por mecanismos flexíveis, onde o movimento é dado pela flexibilidade de sua estrutura, sem juntas e pinos. Uma das formas de atuação de micromecanismos é a eletrotermomecânica, onde uma atuação elétrica sobre o próprio mecanismo é convertida em calor, por efeito Joule, que gera tensões térmicas responsáveis pela deformação estrutural desejada. Recentemente, vários grupos de pesquisa no mundo estão desenvolvendo micromecanismos fabricados com dois (ou até mais) materiais, o que permite obter maiores deformações sem que seja excedido o limite de resistência do material e mais flexibilidade no projeto de micromecanismos que realizem diferentes tarefas quando sujeito a diversas atuações (multiflexíveis). As técnicas de processo de fabricação de micromecanismos atingiram um alto nível de maturidade. No entanto, a modelagem e, em particular, o desenvolvimento de métodos computacionais sistemáticos para o projeto estão ainda no seu estágio inicial. Atualmente, o projeto de micromecanismos com vários materiais vem sendo realizado por métodos de tentativa e erro, dependendo da intuição e experiência do projetista. Além disso, o projeto genérico de um MEMS eletrotermomecânico é uma tarefa complexa, que leva em conta conhecimentos multidisciplinares. Dessa forma, o objetivo desse trabalho de mestrado foi desenvolver um software para o projeto de MEMS multifásicos, atuados eletrotermicamente, usando um método de projeto genérico e sistemático, como o Método de Otimização Topológica (MOT). Utilizando um modelo de interpolação de material de função de pico, qualquer número de materiais pode ser considerado sem que haja aumento na quantidade de variáveis de projeto se comparado à otimização com apenas um material e vazio. Visando maximizar o deslocamento de saída contra uma peça de rigidez conhecida, foram projetados mecanismos atuados por tensão elétrica, alguns considerando multiflexibilidade. Um estudo da influência dos parâmetros da otimização foi realizado. Como uma alternativa à atuação eletrotermomecânica, foram projetados mecanismos atuados por fluxo de calor.
Title in English
Design of multi-phase micromechanisms using the topology optimization method.
Keywords in English
Finite element method
Mechanisms
Microelectromechanical systems
Topology optimization
Abstract in English
A micromechanism is essentially a device of milimetric, or even micrometric, dimensions that can actuate as a gripper, tweezers, clamp, etc. When coupled to an electronic system, they are called "Micro-Electro-Mechanical Systems" (MEMS). Almost all of these devices are constituted by compliant mechanisms, where the motion is allowed by the compliance of its own structure, rather than the presence of joint and pins. One of the forms of micromechanisms actuation is the electrothermomechanical, where an electric actuation applied to the mechanism is converted in heat, by Joule effect, that generates the thermal stress responsible for the desired structural deformation. Recently, many research groups around the world are developing micromechanisms manufactured with two (or even more) materials, what allows larger displacements without exceeding the materials ultimate tensile strength, and gives more flexibility in the design of micromechanisms that accomplish different tasks when under different actuations (multiflexible mechanisms). The manufacturing process techniques of micromechanisms reached a high level of maturity, however, the modelling and, particularly, the development of systematic computational methods for design are still in early stages. Nowadays, micromechanism design with many materials is being carried on by "try and error" methods, depending on designer intuition and experience. Also, a generic design of an electrothermomechanical MEMS is a complex task that needs multidisciplinary knowledge. Thus, the objective of this work is to develop a software for the design of multi-phase MEMS, electrothermomechanically actuated, using a method for systematic and generic design, such as Topology Optimization Method (TOM). Using a peak function material interpolation model, any number of materials can be considered without increasing the amount of design variables if compared to an optimization with only one material and void. Mechanisms actuated by electric tension were designed considering the maximization of output displacement against a work piece with known stiffness. The design of microactuators considering multiflexibility was also performed. A study of optimization parameters influence is presented. As an alternative to electrothermomechanical actuation, some mechanisms actuated by heat flow were designed.
 
WARNING - Viewing this document is conditioned on your acceptance of the following terms of use:
This document is only for private use for research and teaching activities. Reproduction for commercial use is forbidden. This rights cover the whole data about this document as well as its contents. Any uses or copies of this document in whole or in part must include the author's name.
DissertacaoRev.pdf (6.13 Mbytes)
FichaCatalografica.pdf (25.76 Kbytes)
Publishing Date
2007-04-23
 
WARNING: Learn what derived works are clicking here.
All rights of the thesis/dissertation are from the authors
CeTI-SC/STI
Digital Library of Theses and Dissertations of USP. Copyright © 2001-2024. All rights reserved.