• JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
 
  Bookmark and Share
 
 
Doctoral Thesis
DOI
https://doi.org/10.11606/T.3.2020.tde-10082021-145639
Document
Author
Full name
André Soares Braga
E-mail
Institute/School/College
Knowledge Area
Date of Defense
Published
São Paulo, 2020
Supervisor
Committee
Leal Filho, Laurindo de Salles (President)
Bergerman, Maurício Guimarães
Monte, Marisa Bezerra de Mello
Pinto, Thiago Cesar de Souza
Rodrigues, Wendel Johnson
Title in Portuguese
Cinética de flotação de silicatos: macro e micro abordagem.
Keywords in Portuguese
Cinética
Flotação
Silicatos
Abstract in Portuguese
Esta tese busca contribuir para a integração de aspectos macro e micro da cinética de flotação de silicatos, no contexto de dois circuitos industriais brasileiros: Cajati e Brucutu. A cinética do processo de flotação sofre influência de variáveis que atuam em micro escala (tempo de indução, ângulo de contato, tensão superficial, tamanho de bolhas) e em macro escala, como oferta de ar (surface bubble flux - Sb) e qualidade da mistura. Aspectos macro e micro do processo de flotação se integram de modo sinérgico no modelo cinético de primeira ordem, onde a recuperação metalúrgica (R) depende do tempo de residência (t) da polpa no interior da célula de flotação e também da constante cinética (k), que é função da oferta de ar (Sb) e da Eficiência de Coleta (Ek) de partículas minerais por bolhas de ar. No circuito industrial de Brucutu, o mineral que se deseja flotar (quartzo) apresentou elevado ângulo de contato (?=57°), baixo tempo de indução (?i=15ms) e adequada tensão superficial (?=51mN/m > tensão crítica de molhabilidade do quartzo, ?c), indicando alta probabilidade de coleta (Ek). Já no circuito industrial de Cajati, a polpa exibe tensão superficial (?=28mN/m) inferior à tensão superficial crítica de molhabilidade dos silicatos (?c = 35mN/m), destacando-se o mineral flogopita que exibe baixo ângulo de contato (?=12°) e ?i > 6.105ms, o que aponta para uma baixa Ek. O circuito de Brucutu opera com adequada dispersão de gás, exibindo na primeira célula rougher (Wemco#164) Jg = 1,0cm/s, D3,2 = 1,5mm, ?g = 14,4% e Sb = 40s-1. O circuito de Cajati, sob condições de N = 130min-1, opera com inadequada dispersão de gás, apresentando Jg = 0,7cm/s, D3,2 = 1,6mm, ?g = 8,0% e Sb = 26s-1 na primeira célula (Wemco#190) dobanco de flotação. A análise de distribuição de tempos de residência (DTR) para 1ª célula de cada banco de flotação resultou em: a) Brucutu: tempo médio (tm) de 4,6min e número de tanques ideais n = 1,2; enquanto que sua polpa passa pelo impelidor 4,6 vezes (nto); b) Cajati (sob uma rotação de N = 130min-1): tm = 4,2min, n = 2,4 e nto = 1,7, indicando menor probabilidade de coleta de partículas por bolhas de ar. Os resultados experimentais de recuperação metalúrgica em função do tempo mostraram adequada aderência aos modelos clássicos de cinética de 1ª ordem, tanto em escala industrial quanto em laboratório. A constante cinética (k) do circuito de Brucutu (0,10min-1) é 2,5 vezes a do circuito de Cajati (0,04min-1). Em relação ao tempo de residência médio total, em Brucutu tem-se 37,6min de flotação, enquanto Cajati observou-se apenas 16,8min. Utilizando-se valores experimentais de k e de Sb, foi possível estimar Ek de Brucutu como sendo 72% maior que Cajati. O sinergismo entre tm, Sb e Ek resulta numa recuperação de SiO2 em Cajati de 35,5% versus 99,2% em Brucutu. O desempenho inferior de Cajati se deve à flotação ocorrer em menor tempo, em um ambiente com menor oferta de ar e cinética mais lenta.
Title in English
Flotation kinetics of silicates: macro and micro approaches.
Keywords in English
Flotation kinetics
Induction time
Mechanical cells
Residence time distribution
Abstract in English
This thesis aims at contributing towards the integration of macro and micro aspects of flotation kinetics of silicates within the domain of two Brazilian industrial circuits: Brucutu and Cajati. Flotation kinetics is either influenced by variables that actuate in micro scale (induction time, contact angle, surface tension, bubble diameter) or macro scale, as air offer (Surface Bubble Flux - Sb) and quality of mixing. Both macro and micro variables are synergistically integrated in the existing first order kinetic models, where the metallurgical recovery (R) depends largely on the residence time (t) of the slurry in the cells and also on the kinetic constant (k) which is function of surface bubble flux (Sb) and collection efficiency (Ek). For the Brucutu site, the mineral quartz presents high contact angle (?=57°), low induction time (?i=15ms) and adequate surface tension (?=51mN/m > critical wettability tension, ?c). For the Cajati site, bulk silicate flotation exhibits ?=28mN/m (<?c = 35mN/m), highlighting that the mineral phlogopite exhibits low contact angle (?=12°) and high ?i (>6.105ms), which points out to a low value for Ek. The industrial circuit of Brucutu operates with an adequate gas dispersion, showing in the 1st rougher cell (Wemco#164) Jg = 1,0cm/s, D3,2 = 1,5mm, ?g = 14,4% e Sb = 40s-1. The industrial circuit of Cajati (flotation cells operating at impeller rotational speed of 130min-1) works with inadequate gas dispersion, presenting Jg = 0,7cm/s, D3,2 = 1,6mm, ?g = 8,0% e Sb = 26s-1 in the 1st cell (Wemco#190) of the flotation bank. The residence time distribution (RTD) for the 1st cell of each flotation bank resulted in: a) Brucutu average time (tm) of 4.6 min and number of ideal tanks n = 1.2, while the pulp passes through the impeller 4.6 times (nto); b) Cajati (N = 130min-1): tm = 4.2 min, n = 2.4 and nto = 1.7, indicating lower probability of collecting particles by air bubbles. The experimental data of metallurgical recovery as a function of time showed adequate adherence to the classic 1st order kinetic models, in industrial scale as in laboratory. The kinetic constant (k) of the Brucutu circuit (0.10min-1) is 2.5 times higher than the one for the Cajati circuit (0.04min-1). Regarding the average total residence time, in Brucutu there is 37.6 min of flotation, while Cajati was observed only 16.8 min. By applying experimental values of k and Sb, it was possible to estimate Ek of Brucutu as 72% higher than Cajati. The synergism between tm, Sb and Ek results in a 35.5% SiO2 recovery in Cajati versus 99.2% in Brucutu. The lower performance presented in the Cajati flotation circuit is due to the shorter flotation time, in an environment with less air supply and slower kinetics.
 
WARNING - Viewing this document is conditioned on your acceptance of the following terms of use:
This document is only for private use for research and teaching activities. Reproduction for commercial use is forbidden. This rights cover the whole data about this document as well as its contents. Any uses or copies of this document in whole or in part must include the author's name.
Publishing Date
2021-08-11
 
WARNING: Learn what derived works are clicking here.
All rights of the thesis/dissertation are from the authors
CeTI-SC/STI
Digital Library of Theses and Dissertations of USP. Copyright © 2001-2024. All rights reserved.