• JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
 
  Bookmark and Share
 
 
Mémoire de Maîtrise
DOI
https://doi.org/10.11606/D.18.2017.tde-11102017-140716
Document
Auteur
Nom complet
Guilherme Carlos Alves
Unité de l'USP
Domain de Connaissance
Date de Soutenance
Editeur
São Carlos, 2017
Directeur
Jury
Silva, Eraldo Jannone da (Président)
Abrão, Alexandre Mendes
Delijaicov, Sergio
Titre en portugais
Estudo experimental de lubrificação e resfriamento no torneamento duro em componentes de grande porte
Mots-clés en portugais
Integridade superficial
Modelagem estatística
Rolamentos
Torneamento duro
Usinagem de componentes de grande porte
Resumé en portugais
Este trabalho teve como objetivo o estudo experimental de lubrificação e resfriamento no torneamento duro de uma superfície funcional em componentes de grande porte, com aplicação no chão de fábrica. Foram comparadas as técnicas de mínima quantidade de lubrificante e resfriamento abundante, utilizando o método de resposta de superfície. O planejamento tridimensional utilizado foi de dois níveis, adicionado de pontos axiais, ponto central e de réplica. Foram variados a velocidade periférica da peça, o avanço da ferramenta de usinagem e a profundidade de usinagem. Após a execução do experimento, a integridade da superfície foi analisada pela medição da tensão residual, da espessura de possíveis modificações microestruturais e pela medição dos parâmetros estatísticos Sa, Sq e Sz. As medidas foram então ajustadas em modelos matemáticos, otimizadas e por fim comparadas. A análise dos resultados sinalizou que os modelos ajustados para ambos os métodos foram capazes de explicar satisfatoriamente o comportamento das variáveis de resposta. Ainda, a partir da função desirability, foi possível estimar valores ótimos com qualidade equivalente entre os métodos. Tanto para o emprego com mínimas quantidades quanto para resfriamento abundante foram registradas tensões circunferenciais altamente compressivas. Nas condições ótimas, quando empregadas mínimas quantidades de lubrificante, a superfície apresentou valores de tensões residuais 37% maiores em comparação ao obtido quando empregado o resfriamento abundante. Ambos os métodos produziram tanto superfícies livres de modificações microestruturais significativas, como também superfícies com modificações microstruturais significativas. Porém, quando detectadas, as modificações se mostraram muito reduzidas, com espessura de até 2,35 μm. Nas condições ótimas, quando empregado mínimas quantidades de lubrificante, a espessura da modificação foi 74% menor em comparação ao obtido quando empregado o resfriamento abundante. Os parâmetros estatísticos sugeriram alguma vantagem da aplicação de mínimas quantidades de lubrificante. Nas condições ótimas, a aplicação MQL apresentou melhor rugosidade Sa, em 47%, e Sz, em 11%. Porém, o desvio-padrão Sq da superfície apresentou valor 12% maior ao resfriamento abundante.
Titre en anglais
Experimental study of cooling lubrication methods in hard turning of large components
Mots-clés en anglais
Bearings
Hard turning
Machining of large components
Statistical modeling
Surface integrity
Resumé en anglais
This work aimed to conduct a study of cooling and lubrication in hard turning of functional surface of large components. It was compared the performance of minimum quantity lubrication and abundant cooling through the application of response surface methodology. The activities were developed in shop floor application. It was designed a three-dimensional experiment with two levels, added by axial points, center point and one center replicate. The input variables were the peripheral velocity of the workpiece, the feed of the cutting tool and the depth of cut of machining. After the process were analyzed the surface integrity through the circumferential residual stress, possibly microstructure modified layers and statistical parameters such Sa, Sq and Sz. Then, the measurements were adjusted in mathematical models, optimized and compared. The analysis of the results indicated that the adjusted models for both methods were capable of explaining satisfactorily the behavior of the response variables. Also, the use of the desirability function allowed to predict optimal values with equivalent quality between the methods. The minimal quantities, as well the abundant cooling, produced circumferential residual stresses highly compressive. On optimal conditions, the MQL presented residual stresses 37% lower the abundant cooling. Both methods produced surfaces free of significant altered layers as well surface containing significant surface altered layer. However, when detected, the altered surface layer was very thin, with thickness up to 2,35 μm. On optimal conditions, the MQL altered layer was 74% lower the abundant cooling. The statistical parameters indicated some advantage on the application of MQL. On optimal conditions, the minimal quantities presented better Sa roughness in 47%, and Sz, in 11%. However, the standard deviation Sq of the surface presented a value 12% higher the abundant cooling.
 
AVERTISSEMENT - Regarde ce document est soumise à votre acceptation des conditions d'utilisation suivantes:
Ce document est uniquement à des fins privées pour la recherche et l'enseignement. Reproduction à des fins commerciales est interdite. Cette droits couvrent l'ensemble des données sur ce document ainsi que son contenu. Toute utilisation ou de copie de ce document, en totalité ou en partie, doit inclure le nom de l'auteur.
Date de Publication
2017-10-11
 
AVERTISSEMENT: Apprenez ce que sont des œvres dérivées cliquant ici.
Tous droits de la thèse/dissertation appartiennent aux auteurs
CeTI-SC/STI
Bibliothèque Numérique de Thèses et Mémoires de l'USP. Copyright © 2001-2024. Tous droits réservés.