• JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
 
  Bookmark and Share
 
 
Doctoral Thesis
DOI
https://doi.org/10.11606/T.18.2004.tde-10022011-101639
Document
Author
Full name
Benedito Coutinho Neto
E-mail
Institute/School/College
Knowledge Area
Date of Defense
Published
São Carlos, 2004
Supervisor
Committee
Fabbri, Glauco Tulio Pessa (President)
Bernucci, Liedi Legi Bariani
Schalch, Valdir
Soria, Manoel Henrique Alba
Viviani, Eliane
Title in Portuguese
Avaliação do reaproveitamento de areia de fundição como agregado em misturas asfálticas densas
Keywords in Portuguese
Ensaios em pavimentação
Impacto ambiental
Misturas asfálticas
Pavimentação
Reaproveitamento de areia de fundição
Resíduos sólidos
Abstract in Portuguese
A areia de fundição é um resíduo sólido industrial oriundo da etapa de desmoldagem de peças metálicas no processo de produção de fundidos. Esse resíduo, dependendo do processo de fundição utilizado (moldagem a verde, moldagem em casca, moldagem com resina sintética e outros) e do material moldado, pode conter elementos e/ou compostos químicos que podem causar impacto ambiental. As substâncias que podem estar presentes na areia de fundição são provenientes, em parte, do tipo de metal moldado e, em parte, do aglomerante utilizado no processo. O objetivo deste trabalho é apresentar um estudo de alternativa para utilização desse rejeito com a finalidade de contribuir para a minimização do problema, reutilizando-o na composição dos agregados para concreto asfáltico. Para tanto, foram realizados ensaios de classificação de resíduos em amostras de areias virgem e de fundição e em misturas asfálticas, contendo areia virgem e de fundição, não compactadas, para verificar se este resíduo, quando incorporado à massa asfáltica, poluiria o meio ambiente. Realizou-se, também, ensaio de lixiviação com extrator soxhlet em corpo-de-prova de mistura asfáltica com 15% de areia de fundição para avaliar o comportamento, em termos ambientais, desse material a longo prazo. Para verificar o desempenho, da massa asfáltica contendo esse resíduo, na pavimentação, foram realizados ensaios de dosagem Marshall, dano por umidade induzida, cantabro, resistência à tração, módulo de resiliência e fluência estática. Com base nos resultados obtidos, pôde-se concluir, em linhas gerais, que a reutilização de areia de fundição em pavimentação asfáltica é viável, pois as misturas asfálticas contendo esse resíduo apresentaram boas propriedades mecânicas de interesse à pavimentação. Além disso, os ensaios de classificação de resíduos sólidos realizados na massa asfáltica com areia de fundição, cuja classificação original é Classe II - não inerte, ) classificaram a massa asfáltica como resíduo Classe III - inerte, o que sugere um encapsulamento deste resíduo pela massa asfáltica.
Title in English
Evaluation of the reusing of waste foundry sand as an aggregate in dense asphalt
Keywords in English
Environment impact
Hot mix asphalt
Pavement tests
Paving
Reusing of foundry sand
Solid wastes
Abstract in English
Foundry sand is an industrial solid waste resulting from sand casting process in foundry industries. Depending on the type of foundry process (green sand molding, shell sand molding, molding using synthetic resin and others) and of the type cast metal, this waste may contain elements and/or chemical compounds that may cause environmental impact. The substances that may be found in foundry sand proceed partly from the type of the metal and partly from the agglutinant used on the process. The purpose of this research is to present an alternative study for the use of the foundry sand, reusing it in the composition of the aggregate for asphalt concrete and thus to contribute to minimize the environmental impact caused for this waste. To reach this purpose, classification tests of solid wastes were run in virgin sand and foundry sand and asphaltic mixtures not compacted containing both types of sand. This investigation considered the possibility of this waste when incorporated to asphaltic mixture to pollute the environment. Leaching with soxhlet extractor test in specimen of asphaltic mixture with 15% of foundry sand was also realized to evaluate the performance of this material a long-term period in environmental terms. In order to verify the performance in paving, the mixtures were submitted to Marshall method of mix design and to the tests of resilient modulus, indirect tensile strength, cantabro, resistance of compacted bituminous mixture to moisture-induced damage and static creep. Based on the results, it could be concluded that, in a general way, the reuse of foundry sand in asphaltic paving is viable, once the asphaltic mixtures containing this residue presented good mechanical properties. Besides the classification tests of solid wastes realized in asphaltic mixture containing foundry sand, which original classification as class II - no inert, passed to a classification of asphaltic mixture class III - inerte, what suggests that the waste was encapsulated in hot mix asphalt.
 
WARNING - Viewing this document is conditioned on your acceptance of the following terms of use:
This document is only for private use for research and teaching activities. Reproduction for commercial use is forbidden. This rights cover the whole data about this document as well as its contents. Any uses or copies of this document in whole or in part must include the author's name.
BeneditoCoutinho.pdf (2.22 Mbytes)
Publishing Date
2011-03-04
 
WARNING: Learn what derived works are clicking here.
All rights of the thesis/dissertation are from the authors
CeTI-SC/STI
Digital Library of Theses and Dissertations of USP. Copyright © 2001-2024. All rights reserved.