• JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
 
  Bookmark and Share
 
 
Master's Dissertation
DOI
https://doi.org/10.11606/D.18.2006.tde-23082006-090843
Document
Author
Full name
André Luiz Carregari
Institute/School/College
Knowledge Area
Date of Defense
Published
São Carlos, 2006
Supervisor
Committee
Greco Junior, Paulo Celso (President)
Catalano, Fernando Martini
Girardi, Roberto da Mota
Title in Portuguese
Estudo do escoamento de ar sobre a carroceria de um ônibus usando um programa de CFD e comparação com dados experimentais
Keywords in Portuguese
arrasto aerodinâmico
coeficiente de pressão
esteira turbulenta
força lateral
modelo de turbulência RNG 'capa' - 'épsilon'
Abstract in Portuguese
Dois dos principais objetivos no estudo da aerodinâmica de veículos comerciais são a redução no consumo de combustível e o aumento na eficiência da refrigeração do motor. Esses objetivos podem ser alcançados através do desenvolvimento de dispositivos que modifiquem o escoamento do ar ao redor do veículo e também através da alteração da forma das superfícies externas. A inclinação das superfícies da parte traseira de um ônibus, por exemplo, tem grande influência sobre a esteira turbulenta que se forma atrás do veículo. O uso de ferramentas computacionais permite uma redução de custo e maior flexibilidade na análise aerodinâmica de autoveículos. Ainda é preciso, no entanto, que o resultado dessas ferramentas computacionais seja verificado com o maior número possível de casos para que se possa escolher e ajustar o modelo matemático de forma adequada. O objetivo do presente trabalho é a verificação dos resultados computacionais e experimentais no desenvolvimento de metodologias que visem à redução no consumo de combustível e aumento na eficiência da refrigeração do motor. Foram comparados resultados experimentais e computacionais do escoamento sobre um modelo de um ônibus comercial em escala 1:17,5. Para a realização do experimento foi utilizado um túnel de vento de seção aberta, onde foram analisadas as distribuições de pressão nas superfícies da carroceria e o arrasto aerodinâmico. Para o teste computacional, foi utilizado um software de dinâmica dos fluidos computacional em que as equações de Navier-Stokes com média de Reynolds são resolvidas pelo método dos volumes finitos usando um modelo de turbulência RNG 'capa' - 'épsilon'
Title in English
Study of the air flow around a bus using CFD software and comparison with experimental data
Keywords in English
aerodynamic drag
pressure coefficient
RNG 'capa' - 'épsilon' turbulence model
side force
turbulent wake
Abstract in English
Two main objectives in the study of commercial vehicle aerodynamics are the reduction in fuel consumption and the improvement in engine refrigeration efficiency. These objectives can be achieved through development of devices which vary the flow characteristics around the vehicle and also through modification of the shape of external surfaces. The slope of rear surfaces, for instance, has large influence over the wake turbulence which forms behind the vehicle. The use of computational tools yields cost reduction and greater flexibility in automotive aerodynamic analysis. There is still a need, however, for verification of results, generated by these computational tools, with the largest possible number of test cases so that the mathematical model is adequately chosen and adjusted. The objective of the present work is the verification of experimental and computational results in the development of methodologies aiming at reduction of fuel consumption and improvement in engine refrigeration efficiency. Experimental and computational aerodynamic results were compared for a commercial bus model with a 1:17.5 scale. The experiments were conducted in an open section wind tunnel where pressure distribution and aerodynamic drag were analyzed. The numerical analysis was conducted using computational fluid dynamics software which solves the Reynolds Averaged Navier-Stokes equations using the finite volume method with a RNG 'capa' - 'épsilon' turbulence model
 
WARNING - Viewing this document is conditioned on your acceptance of the following terms of use:
This document is only for private use for research and teaching activities. Reproduction for commercial use is forbidden. This rights cover the whole data about this document as well as its contents. Any uses or copies of this document in whole or in part must include the author's name.
29_05_2006.pdf (4.79 Mbytes)
Publishing Date
2006-08-30
 
WARNING: Learn what derived works are clicking here.
All rights of the thesis/dissertation are from the authors
CeTI-SC/STI
Digital Library of Theses and Dissertations of USP. Copyright © 2001-2024. All rights reserved.