• JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
 
  Bookmark and Share
 
 
Mémoire de Maîtrise
DOI
https://doi.org/10.11606/D.11.2010.tde-17032010-110600
Document
Auteur
Nom complet
Mônica Duarte Aprilanti
Adresse Mail
Unité de l'USP
Domain de Connaissance
Date de Soutenance
Editeur
Piracicaba, 2010
Directeur
Jury
Garcia, Jose Nivaldo (Président)
Fiorelli, Juliano
Pappalardo Júnior, Alfonso
Titre en portugais
Influência de um corte na borda tracionada de uma viga maciça simulando uma emenda de topo na lâmina inferior de vigas laminadas coladas
Mots-clés en portugais
Densidade da madeira
Dimensionamento de estruturas
Estruturas de madeira colada
Eucalipto
Laminados
Madeira - Propriedades mecânicas.
Resumé en portugais
A madeira laminada colada (MLC) é um produto estrutural que permite racionalizar o uso da madeira sólida, pois a partir de pequenas peças selecionadas e preparadas é possível produzir grandes vigas das mais variadas formas. A utilização da madeira de reflorestamento na produção de MLC lhe confere vantagens ambientais sobre outros materiais e o Eucalyptus grandis é uma espécie que oferece grande potencial para o uso estrutural. As emendas longitudinais entre lâminas representam descontinuidades na peça de MLC e, assim como os defeitos em peças maciças, são regiões potencialmente fracas causando grande influência na resistência de vigas laminadas. O objetivo do presente trabalho foi o de estudar a influência de uma emenda de topo e de sua posição na lâmina inferior de vigas laminadas coladas (VLCs) no momento de inércia, na elástica da viga e consequentemente no módulo de elasticidade na flexão estática (EM0). Foi conduzido um estudo teórico-experimental com corpos-de-prova maciços que receberam um corte na borda tracionada simulando uma emenda de topo na lâmina inferior de VLCs. Em uma 1ª etapa da experimentação, foram realizados ensaios de flexão estática destrutivos com corposde- prova de seção transversal 2,5 x 2,5 cm não classificados com o intuito de explorar a grandeza da variabilidade das propriedades estudadas para diferentes posições da emenda ao longo da borda inferior da viga biapoiada. A 2ª etapa de ensaios consistiu na classificação de um lote de corpos-de-prova de seção transversal de 3,0 x 4,0 cm através de ensaios de flexão estática não destrutivos para minimizar o erro experimental imposto pela variabilidade natural do material. Em uma 3ª etapa, foram realizados ensaios de flexão estática destrutivos de corpos-de-prova de seção transversal 3,0 x 4,0 cm classificados para estudar o efeito de diferentes posições da emenda na borda inferior da viga num lote de menor variabilidade. Em uma 4ª etapa da experimentação foram realizadas simulações através de planilhas de cálculo com base na teoria de Garcia (2008) para a comprovação dos resultados experimentais e elaboração de novas formulações de dimensionamento de VLCs. Verificou-se que o corte não influenciou no EM0 nos ensaios da 1ª etapa quando se tratou de um lote de madeira desuniforme, mas exerceu um efeito significativo nos ensaios da 3ª etapa dentro do lote de peças classificadas. Concluiu-se que o corte influencia na rigidez da viga à flexão (EI), pois provoca uma modificação do fluxo de tensões com consequente alteração da distribuição de tensões ao longo da altura da viga e do momento de inércia. A concentração de tensões na área circundante ao corte provoca uma redução no momento de inércia que deve ser levada em consideração no dimensionamento de VLCs em que se utilizam emendas de topo nas lâminas tracionadas. O corte influencia significantemente na resistência à flexão da viga porque dá origem ao aparecimento de uma fissura paralela à grã que transporta a altura reduzida pelo corte à seção critica. Essa fissura é provocada por cisalhamento oriundo do momento fletor e não do esforço cortante.
Titre en anglais
The influence of a cut in the tensioned edge of a solid beam simulating a butt joint at the bottom lamination of glued laminated beams
Mots-clés en anglais
Eucalyptus
Glued timber structures
Laminate
Specific gravity
Structural design
Wood Mechanical properties.
Resumé en anglais
Glued laminated timber (GLULAM) is a structural product that allows rationalizing the use of solid wood, as from small selected and prepared pieces it is possible to produce large beams in a variety of shapes. The use wood from planted forests in GLULAM production brings environmental advantages compared to other materials and Eucalyptus grandis is a species that offers great potential for structural use. The end joints that connect pieces to perform the entire laminas represent discontinuities in the GLULAM and as many defects in solid wood are potentially weak areas. The aim of the present paper is to study the influence of a butt joint and its position in the bottom lamination of glued laminated beams, on the moment of inertia, on the elastic of the beam and therefore on the modulus of elasticity in static bending (EM0). A theoretical and experimental study was conducted with solid specimens that were cut on the tensioned edge simulating a butt joint at the bottom lamination of glued laminated beams. At a first phase of testing, destructive static bending tests were performed with specimens sized 2.5 x 2.5 cm as cross-section non classified in order to explore the magnitude of the natural variability of the studied properties for different positions of the joint along the bottom edge of the biconstrainted beam. The second phase of testing consisted in classifying a batch of specimens 3.0 x 4.0 cm cross section by non-destructive static bending tests to minimize experimental error imposed by the natural variability of the material. At a third phase, destructive static bending tests were performed with 3.0 x 4.0 cm cross section classified specimens to study the effect of different positions of the joint on the bottom edge of the beam in a group of low variability. At the fourth phase simulations were performed using spreadsheets on the Garcia´s theory (2008) to verify the experimental results and the development of new formulations of glued laminated beams design. It was verified that the cut did not affect the EM0 on the first step of testing when regarding a non uniform batch of wood, but there was a significant effect on the tests of the third step over the batch of classified wood. It was concluded that the cut influences the stiffness of the bending beam (EI) by changing the flux tensions pattern and consequent change in stress distribution along the beam height and the moment of inertia. The concentration of stresses in the area surrounding the cut causes a reduction in the moment of inertia that must be taken into account for designing glued laminated beams that use butt joints in the tensioned edge. The cut significantly influence the beam bending strength because give way to appear a check in parallel to the grain and transport the reduced height to the critical cross section. Such a check is due shear stresses consequent of the bending moment and not from the shear force.
 
AVERTISSEMENT - Regarde ce document est soumise à votre acceptation des conditions d'utilisation suivantes:
Ce document est uniquement à des fins privées pour la recherche et l'enseignement. Reproduction à des fins commerciales est interdite. Cette droits couvrent l'ensemble des données sur ce document ainsi que son contenu. Toute utilisation ou de copie de ce document, en totalité ou en partie, doit inclure le nom de l'auteur.
Monica_Aprilanti.pdf (2.36 Mbytes)
Date de Publication
2010-04-01
 
AVERTISSEMENT: Apprenez ce que sont des œvres dérivées cliquant ici.
Tous droits de la thèse/dissertation appartiennent aux auteurs
CeTI-SC/STI
Bibliothèque Numérique de Thèses et Mémoires de l'USP. Copyright © 2001-2024. Tous droits réservés.