• JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
 
  Bookmark and Share
 
 
Master's Dissertation
DOI
https://doi.org/10.11606/D.97.2012.tde-02102013-115013
Document
Author
Full name
Márcio Steinmetz Soares
E-mail
Institute/School/College
Knowledge Area
Date of Defense
Published
Lorena, 2012
Supervisor
Committee
Oliveira, Pedro Carlos de (President)
Castro, Heizir Ferreira de
Cioffi, Maria Odila Hilário
Title in Portuguese
Síntese e caracterização de espumas de poliuterano para imobilização de células íntegras e aplicação na síntese de biodiesel
Keywords in Portuguese
Biodiesel
Espumas de poliuretano
Imobilização de células
Abstract in Portuguese
O presente trabalho teve por objetivo sintetizar espumas flexíveis de poliuretano e estudar seu desempenho como matriz para imobilização de células íntegras de micro-organismo com elevada atividade lipolítica (glicerol éster hidrolase - E.C. 3.1.1.3). A biomassa imobilizada foi empregada como catalisador na síntese de biodiesel a partir do óleo de babaçu e etanol. Na primeira etapa do trabalho, foram avaliadas as condições de síntese das espumas de poliuretano e verificado a necessidade do uso dos catalisadores e surfactantes na formulação para se obter espumas com resistência a solventes e com poros bem distribuídos. Com o objetivo de controlar o diâmetro dos poros das espumas, foram sintetizadas sete espumas. Em três formulações foram utilizados poliois poliéter de diferentes massas moleculares, 1100g/mol, 3000g/mol e 6000g/mol com mesma agitação (2500RPM) e os produtos apresentaram poros de menores dimensões. Em outras três, duas utilizando o poliol com massa molecular de 3000g/mol e agitações de 500 RPM e 1500RPM, foram obtidas espumas com tamanho de poros diferentes e maiores que as anteriores; em outra formulação foi utilizado poliol de menor massa molecular (1100g/mol) e agitação de 500RPM, quando foi obtida espuma com tamanhos de poros diferentes das três primeiras formulações. Na ultima formulação foi utilizado um poliol poliéster e agitação de 2500RPM na qual o diâmetro de poros foi semelhante ao das três primeiras formulações. Todas as espumas foram caracterizadas quanto à densidade aparente, tamanho de poros, permeabilidade ao ar, grau de inchamento, quantidade de solvente absorvida pelo polímero e sorção de água. Nesta etapa foi verificada a eficiência da agitação para o controle da dimensão dos poros. Na etapa seguinte, as espumas sintetizadas e uma espuma comercial pré-selecionada e utilizada como controle, foram empregadas nas imobilizações das células íntegras de Mucor circinelloides. Foram avaliadas as atividades de hidrólise das biomassas imobilizadas e a quantidade de micélio adsorvido nas espumas. Na seqüência as células foram empregadas na etanólise de óleo de babaçu em meio contendo terc-butanol como solvente. Os resultados obtidos indicaram uma influencia do tamanho de poros e do tipo de poliol no rendimento da bioconversão. Elevados rendimentos foram obtidos com as espumas com poros de menores dimensões, sendo estas utilizadas em bateladas consecutivas com o objetivo de comparar as respectivas estabilidades operacionais. Ao se utilizar espuma com diâmetros de poros maiores, houve um aumento das conversões nas primeiras 24 horas, porém um comprometimento dos rendimentos finais na transesterificação. As espumas com poliol poliéter apresentaram boa biocompatibilidade com o fungo, destacando as espumas sintetizada com os poliois de massa molecular de 1100g/mol, por apresentar boa estabilidade operacional e a espuma com poliol de massa molecular de 6000g/mol, por apresentar o maior rendimento, cerca de 87%. Entre as espumas testadas aquela sintetizada a partir de poliéster não apresentou uma boa biocompatibilidade devido à inibição da produção da lipase intracelular na biomassa imobilizada. Os resultados obtidos indicaram que as espumas de poliuretano apresentaramm boas características para a imobilização de células de M. circinelloides e que as biomassas imobilizadas nestas matrizes apresentaram boas propriedades catalíticas.
Title in English
Synthesis and characterization of polyurethane foams for immobilization of whole cell and application in the synthesis of biodiesel
Keywords in English
Biodiesel
Polyurethane foams
Whole cell immobilization
Abstract in English
This study aimed to synthesize flexible polyurethane foams and to study their performance as matrix for immobilization of whole cell micro-organism with high lipolytic activity (glycerol ester hydrolase - EC 3.1.1.3). Each system consisted of polyurethane matrix and whole cell, called immobilized biomass, was used as catalyst in the synthesis of biodiesel from babassu oil and ethanol. In the first stage of the research were evaluated the conditions of synthesis of polyurethane foams and verified the utilization of catalysts and surfactants in the formulation to obtain foams with resistance to solvents and welldistributed pores. In order to control the pore diameter of the foams, seven foams were synthesized. In three formulations were used polyether polyols with different molecular weight, 1100g/mol, 3000g/mol and 6000g/mol with same agitation (2500rpm) and the foams exhibited pores of small dimensions. In other three synthesis, two of them using the polyols with molecular weight of 3000g/mol and agitations of 500 rpm, 1500 rpm, the foams showed the different and bigger pore dimensions when compared with the first three formulations; in other using polyol with lower molecular weight on agitation (1100g/mol) and 500rpm, resulting in foams with different pore sizes. The last foam with polyester polyol and agitation of 2500rpm showed the same pores sizes of the first three formulatios. All foams were characterized in terms of apparent density, pore size, air permeability, degree of swelling, amount of absorbed solvent by the polymer and water sorption. This step was verified the influence of the agitation speed in the control of pore size. In the next step, the synthesized foams and a pre-selected foam used as control, were used in immobilization of whole cells of Mucor circinelloides. The hydrolytic activity of immobilized biomass and the amount of adsorbed mycelium foams were evaluated. In the following step, the whole cells immobilized in the matrixes of polyurethane were employed in the ethanolysis of babassu oil using tert-butanol as solvent. The results indicated the influence of pore size and the type of polyol in the bioconversion yield. High yields were obtained with foams with smaller pores sizes, which were used in consecutive batches in order of evaluate the operational stability. When using foam with larger pore diameters, there was an increase in conversions in the first 24 hours, but a commitment of final earnings in the transesterification. Although the polyether polyol foams showed good biocompatibility with the fungus, highlighting the foam polyols synthesized with a molecular mass of 1100g/mol by presenting good operational stability and foam polyol with a molecular mass of 6000g/mol by presenting the highest yield (87%). Between the tested foams the one synthesized with polyester did not show good biocompatibility due to inhibition of intracellular production of biomass immobilized lipase. The results indicated that the polyurethane foams had good characteristics for immobilization of whole cells of M. circinelloides as well as the immobilized biomass showed good catalytic properties.
 
WARNING - Viewing this document is conditioned on your acceptance of the following terms of use:
This document is only for private use for research and teaching activities. Reproduction for commercial use is forbidden. This rights cover the whole data about this document as well as its contents. Any uses or copies of this document in whole or in part must include the author's name.
EQD12003_O.pdf (2.77 Mbytes)
Publishing Date
2013-10-02
 
WARNING: Learn what derived works are clicking here.
All rights of the thesis/dissertation are from the authors
CeTI-SC/STI
Digital Library of Theses and Dissertations of USP. Copyright © 2001-2024. All rights reserved.