• JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
 
  Bookmark and Share
 
 
Doctoral Thesis
DOI
https://doi.org/10.11606/T.97.2014.tde-24072014-152828
Document
Author
Full name
Alex Matos da Silva Costa
E-mail
Institute/School/College
Knowledge Area
Date of Defense
Published
Lorena, 2014
Supervisor
Committee
Coelho, Gilberto Carvalho (President)
Almeida, Luiz Henrique de
Barboza, Miguel Justino Ribeiro
Londoño, Antonio José Ramirez
Sandim, Hugo Ricardo Zschommler
Title in Portuguese
Solidificação direcional da superliga MAR-M247 modificada com Nióbio: processamento e caracterizações microestruturais e mecânicas
Keywords in Portuguese
ensaios de fluência
MAR-M247
oxidação isotérmica
solidificação direcional
substituição Ta pelo Nb
temperaturas de transformações de fases
Abstract in Portuguese
A proposta da modificação química da superliga MAR-M247 através da substituição do Ta pelo Nb (em átomos) foi baseada nas seguintes informações: (1) O Nb desempenha funções muita parecidas com as do Ta nas superligas à base de Ni, como endurecedor via solução sólida da fase ? e elemento formador de fases secundárias (?? e carbonetos); (2) O Brasil tem as maiores reservas de Nb do mundo e (3) O Nb já é adicionado em diversas classes de superligas à base de Ni - fundidas convencionalmente e solidificadas direcionalmente e monocristalinas. Neste trabalho o objetivo principal foi de avaliar a viabilidade da substituição do Ta pelo Nb na superliga à base de Ni MAR-M247. As amostras da MAR-M247 e da liga modificada - MAR-M247[Nb] utilizadas na caracterização microestrutural foram obtidas por solidificação direcional no forno a vácuo do tipo forno Bridgman (Lab. de Solidificação/FEM-UNICAMP) nas seguintes condições de processamento: v = 5, 10 e 18 cm/h e G = 80°C/cm. As simulações de cálculo termodinâmico utilizando o programa Thermo-Calc foram realizadas com o objetivo de se avaliar se as temperaturas de transformação mudariam com a substituição do Ta pelo Nb. Para avaliação das propriedades mecânicas em alta temperatura e a estabilidade estrutural da superliga MAR-M247[Nb] foram realizados ensaios de fluência a 750 e 850 °C nas tensões de 840, 780 e 440 MPa. A estabilidade microestrutural da MAR-M247[Nb] foi testada por meio de ensaios de oxidação isotérmica a 1000 °C no intervalo de tempo de 30 minutos a 100 h. A substituição do Ta pelo Nb promoveu mudanças significativas principalmente nas temperaturas de formação do eutético ?/??, solvus - ?? e de fusão incipiente. As microestruturas das ligas após os experimentos de solidificação direcional a v = 5, 10 e 18 cm/h eram constituídas por dendritas da fase gama - ? e precipitados coerentes da fase gama linha - ?? (morfologia cuboidal). Na região interdendrítica da MAR-M247 e MAR-M247[Nb] solidificadas a v = 5 e 10 cm/h foram encontrados os eutéticos ?/?? e ?/Ni5(Hf,Zr). Na v = 18 cm/h a região interdendrítica era constituída apenas do eutético ?/??. A exposição a 1250 °C por 15 e 30 dias promoveu a decomposição total e a re-precipitação de carbonetos do tipo MC. No entanto, devido à contaminação por oxigênio e nitrogênio durante os tratamento térmicos, não foi atingido o equilíbrio termodinâmico em decorrência de mudanças das composições dos carbonetos MC. Nos ensaios de fluência a 750 °C, os tempos de ruptura foram de 49 h para MAR-M247 e de 39,4 h para MAR-M247[Nb] apesar dos elevados valores das tensões terem sido superestimados. A 850 °C o tempo de ruptura da MAR-M247[Nb] (trup = 359 horas) foi reduzido em 32 % em relação ao valor observado para MAR-M247 (trup = 476 horas). Os resultados dos ensaios de oxidação a 1000 °C da superliga MAR-M247[Nb] mostraram que o período transiente foi de 20 h com ganho de massa expressivo. A partir de 50 h o efeito do descolamento das camadas oxidadas durante o resfriamento das amostras foi significativo e promoveu uma variação de massa importante no intervalo de tempo de 50 a 100 h. Ensaios de oxidação em tempos mais longo deverão ser feitos para determinação da estrutura de formação das camadas e seus respectivos constituintes.
Title in English
Directional solidification of niobium modified MAR-M247 superalloy: processing, microstructural and mechanical characterization
Keywords in English
creep test
directional solidification; phase transformation temperature
isothermal oxidation
MAR-M247 superalloy; Ta by Nb replacing
Abstract in English
The chemistry modification in the Ni-based superalloy MAR-M247 through the replacing all Ta by Nb was based on in these statements: (1) Nb does the same function in Ni-based superalloys as Ta does, solid solution strenghtening and ?? e carbides element formers, (2) Brazil has the major ores of Nb in the world and (3) Nb has been added in all classes of Ni superalloy conventional casting, columnar and single crystal processed by directional solidification. In this study the main focus was to evaluate the feasibility of replacing Ta by Nb in the Ni - based superalloy MAR-M247. The samples of MAR-M247 and the Nb modified MAR-M247[Nb] were produced by directional solidification in a Bridgman vacuum furnace at the Solidification Research Lab/FEM - UNICAMP) in the following processing conditions: v = 5, 10 and 18 cm/h and G = 80 °C/cm. The thermodynamic simulations using Thermo-Calc program were performed to evaluate whether or not the transformation temperatures would change with the replacing of Ta by Nb. For the evaluation of mechanical properties at high temperature were performed creep rupture tests at 750 and 850 °C under the stress values of 840, 780 and 440 MPa. The isotermal oxidation tests at 1000 °C were done during the time interval of 30 min to 100 h. The replacing of Ta by Nb promoted some changes in eutectic-?/??, ??-solvus and incipient melting temperatures. After the directional solidification experiments at the v = 5, 10 and 18 cm/h the microstructural characterization has shown that for all condition the microstructures were composed by dendrites - ? and ?? - cuboidal precipitates in it. In the interdendritic region was observe the ?/?? and ?/Ni5(Hf,Zr) eutectics for v = 5 and 10 cm/h and only the ?/?? eutectics for v = 18 cm/h. The exposure at 1250 °C for the extended times promoted the formation of fine MC carbides but the equilibrium compositions have not been achieved due to the oxygen and nitrogen contamination. In the creep rupture tests at 750 °C the MAR-M247[Nb] have shown more shorter lifetime than the MAR-M247 even with overestimated tensile stress. At 850 °C the lifetime for MAR-M247[Nb] (trup = 359 h) was reduced by 32 % compared to the MAR-M247 (trup = 476 h). It was discussed that the changes in the composition of the ? phase induced Ta by Nb replacing which would led to the weakness of matrix in the MAR-M247[Nb]. The samples were oxidized at 1000 °C showed 20 h to the transient period and significant weight gain in that time. However at the extended period the weight gain had changed significantly and was precluded to predict the structure formation of oxides layer properly.
 
WARNING - Viewing this document is conditioned on your acceptance of the following terms of use:
This document is only for private use for research and teaching activities. Reproduction for commercial use is forbidden. This rights cover the whole data about this document as well as its contents. Any uses or copies of this document in whole or in part must include the author's name.
EMT14001_C.pdf (10.24 Mbytes)
Publishing Date
2014-07-24
 
WARNING: Learn what derived works are clicking here.
All rights of the thesis/dissertation are from the authors
CeTI-SC/STI
Digital Library of Theses and Dissertations of USP. Copyright © 2001-2024. All rights reserved.