• JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
 
  Bookmark and Share
 
 
Doctoral Thesis
DOI
https://doi.org/10.11606/T.88.2012.tde-20122012-092456
Document
Author
Full name
Danilo Borges Villarino de Castro
E-mail
Institute/School/College
Knowledge Area
Date of Defense
Published
São Carlos, 2012
Supervisor
Committee
Bose Filho, Waldek Wladimir (President)
Baptista, Carlos Antonio Reis Pereira
Nunes, Carlos Angelo
Rodrigues, Alessandro Roger
Tokimatsu, Ruis Camargo
Title in Portuguese
Estudo do comportamento em fadiga do aço ASTM A297 Gr HP modificado com nióbio em altas temperaturas
Keywords in Portuguese
Aço ASTM A-297
Alta temperatura
Envelhecimento
Fadiga
Fluência
Nióbio
Abstract in Portuguese
Este trabalho teve por objetivo estudar o comportamento mecânico em elevadas temperaturas do aço ASTM A-297 Gr HP modificado ao nióbio. Este tipo de aço é utilizado em suportes de tubos que permanecem longos períodos de tempo expostos em temperaturas de operação próximas a 900ºC. Nesta pesquisa, foram estudadas a microestrutura, a resistência mecânica, a tenacidade ao impacto e a resistência à fadiga, considerando o efeito da temperatura de ensaio. Para a avaliação do efeito da temperatura e tempo de permanência na microestrutura e, consequentemente, nas propriedades mecânicas, foram realizados ensaios de dureza, tração e impacto para cada uma das condições apresentadas. Todas as condições do material envelhecido apresentaram a presença de precipitados nos contornos interdendríticos e precipitados secundários no seio da matriz austenítica, fazendo com que o material elevasse seus parâmetros de resistência mecânica, quando comparado com a condição de como-recebido (CR). Após esta etapa, foi estudado o comportamento mecânico em temperaturas elevadas, apenas para as condições CR e T1000 (envelhecido a 927°C durante 1000 horas). Ensaios mecânicos de tração, impacto e fadiga (E-N e da/dN-'delta'K) foram realizados nas seguintes temperaturas: 25ºC, 871ºC, 899ºC, 927ºC, 954ºC e 982ºC. Para a avaliação dos ensaios de impacto, utilizaram-se corpos de prova Charpy do tipo convencional (presença do entalhe) e pré-trincados (entalhe mais pré-trinca). Em todas as temperaturas de ensaio de tração, observou-se que a condição T1000 resultou em aumento do valor dos parâmetros de resistência mecânica e diminuição da sua ductilidade, em relação à condição CR. Em ensaios nas temperaturas elevadas, observou-se que a precipitação de carbetos secundários na matriz austenítica da condição T1000 é capaz de evitar uma queda acentuada dos parâmetros de resistência mecânica, quando comparada com a condição CR. As duas condições (CR e T1000) mostraram-se sensíveis à presença de um concentrador de tensão (entalhe mais pré-trinca), quando submetidas a ensaios de impacto. Os resultados de tração e impacto corroboram as evidências fractográficas encontradas para cada condição, indicando que há uma maior parcela de fratura dúctil nas amostras ensaidas em temperaturas elevadas do que na temperatura ambiente. Em relação ao comportamento em fadiga do material, observou-se que a vida em fadiga do material ensaiado em 25ºC foi muito maior do que a 927ºC, principalmente na região de fadiga de alto ciclo. Este fato pode ser atribuído a dois fatores dependentes do tempo: nucleação prematura decorrente de uma significativa redução do limite de escoamento e devido ao efeito da oxidação superficial das bandas de deslizamento permanentes. Os ensaios de propagação de trinca por fadiga mostraram que a taxa da/dN foi maior na temperatura de 927ºC do que em 25ºC, devido ao fato da maior ductilidade que o material apresenta em elevadas temperaturas, associado aos efeitos de oxidação e de fluência. Alguns resultados de fadiga de baixo ciclo foram confrontados com modelos teóricos de plasticidade. As curvas teóricas foram capazes de simular relativamente bem os resultados experimentais.
Title in English
Fatigue behavior of ASTM A-297 grade HP steel modified with niobium in high temperatures
Keywords in English
Aging
ASTM A-297 steel
Creep
Fatigue
High temperature
Niobium
Abstract in English
This work aims to study the mechanical behavior at high temperatures of ASTM A-297 Gr HP steel changed with niobium. This type of steel is used for pipe supports that remain exposed long periods of time at operating temperatures near 900°C. In this study, was studied the microstructural composition, the mechanical strength, impact toughness and fatigue resistance, considering the effect of temperature test. To evaluate the effect of temperature and residence time in the microstructure and hence the mechanical properties were performed hardness, tensile and impact test for each of the conditions presented. All conditions of the aged material showed the presence of precipitates in the interdendritic boundaries and secondary precipitates within the austenitic matrix, causing the material to elevate its mechanical strength, compared to CR condition. After this step was studied the mechanical properties at elevated temperatures only for the conditions CR and T1000 (aged at 927°C for 1000 hours). Tensile, impact and fatigue tests (E-N and da/dN-'delta'K), were performed at the following temperatures: 25°C, 871ºC, 899ºC, 927ºC, 954ºC and 982°C. To evaluate the impact tests, were used Charpy specimens of the conventional type (presence of the notch) and pre-cracked (pre crack more notch). In all test temperatures of traction, it was observed that the T1000 condition resulted in an increase of the value of mechanical strength and reduction of its ductility, compared to CR conditions. In tests at elevated temperatures, it was observed that the precipitation of carbides in the austenitic matrix of the secondary condition T1000 is able to avoid a sharp decline in mechanical strength compared with the proviso CR. The two conditions (CR and T1000) were sensitive to the presence of a stress raiser (notch further pre-crack) when subjected to impact tests. The results of tensile and impact fractographies corroborate the evidence found for each condition, indicating a greater share of ductile fracture in testing samples at elevated temperatures than at room temperature. Regarding the fatigue behavior of the material, it was found that the fatigue life of the material tested at 25°C was much greater than 927°C, especially in the region of high cycle fatigue. This fact can be attributed to two factors dependent on the time: premature nucleation due to a significant reduction in yield strength and due to the effect of surface oxidation of permanent slip bands. The tests of crack propagation by fatigue showed that the rate da/dN was greater at a temperature of 927°C than at 25°C, because of higher ductility that the material exhibits at high temperatures associated with the effects of oxidation and creep.
 
WARNING - Viewing this document is conditioned on your acceptance of the following terms of use:
This document is only for private use for research and teaching activities. Reproduction for commercial use is forbidden. This rights cover the whole data about this document as well as its contents. Any uses or copies of this document in whole or in part must include the author's name.
Publishing Date
2013-01-22
 
WARNING: Learn what derived works are clicking here.
All rights of the thesis/dissertation are from the authors
CeTI-SC/STI
Digital Library of Theses and Dissertations of USP. Copyright © 2001-2024. All rights reserved.