• JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
 
  Bookmark and Share
 
 
Master's Dissertation
DOI
https://doi.org/10.11606/D.88.2016.tde-14092016-164708
Document
Author
Full name
Cleyton Fernandes Ferrarini
Institute/School/College
Knowledge Area
Date of Defense
Published
São Carlos, 1998
Supervisor
Committee
Canale, Lauralice de Campos Franceschini (President)
Gomes, Samuel Irati Novaes
Zavaglia, Cecília Amélia de Carvalho
Title in Portuguese
Análise da resistência ao desgaste abrasivo de um revestimento duro obtido pela deposição, por soldagem, de uma liga a base de ferro
Keywords in Portuguese
Abrasão
Desgaste
Liga ferrosa
Revestimento duro
Abstract in Portuguese
O presente trabalho apresenta a análise da resistência ao desgaste abrasivo de um revestimento duro e do aço SAE 5160. O revestimento foi obtido pela deposição de uma liga ferrosa através de processo de soldagem "TIG" sobre um aço ABNT 1020. Aliga foi desenvolvida com a utilização de CR e Nb como elementos formadores de carbonetos, proporcionando uma microestrutura constituída, no estado bruto de fusão, de uma rede de carbonetos (Cr, Fe)7C3 interdendríticos e NbC dispersos em uma matriz austenítica. Corpos de prova revestidos foram submetidos a tratamentos térmicos de normalização, têmpera, sub-zero e revenido, visando a obtenção de diferentes microestruturas na matriz, enquanto que o aço SAE 5160 foi temperado e revenido de acordo com o procedimento utilizado na confecção de ferramentas agrícolas com este material. A resistência ao desgaste do revestimento foi superior à do aço SAE 5160 nos dois tipos de ensaios de abrasão realizados, sendo os melhores desempenhos apresentados pelo revestimento temperado no ensaio realizado com equipamento do tipo pino sobre lixa e pelo revestimento temperado e revenido no ensaio do tipo roda de borracha/areia seca. A identificação dos mecanismos de remoção de material predominantes nos ensaios abrasivos foi possibilitada pela observação das superfícies desgastadas dos corpos de prova através de microscopia eletrônica de varredura.
Title in English
Analysis of the abrasive wear resistance of a hardfacing obtained through the deposition by the welding of an iron based alloy
Keywords in English
Abrasion
Hardfacing
Iron based alloy
Wear
Abstract in English
The present work presents an analysis of the abrasive wear resistance of a hardfacing and of the SAE 5160 steel. The hardfacing was obtained by the deposition of a iron based alloy through "TIG" welding on a ABNT 1020 steel. This alloy was developed with the use of Cr and Nb as carbide forming elements , resulting in a microstructure formed by a carbide net of M7C3 interdendritic in a austenitic matrix. The hardfacing samples suffered heat treatment of normalizing, hardening, tempering and subzero, viewing the achievement of differents microstructure, while the SAE 5160 steel suffered hardening and tempering according to the production process used in the agricutural tool manufacturing. The wear resistance of the hardfacing overcame the SAE 5160 steel in both types of abrasion wear tests, and the best performances were presented by hardening hardfacing in the pin wear test and by the tempering hardfacing in the rubber wheel/dry sand test. The identification of the material removal mechanisms in the abrasive tests was made by the observation of the worn surfaces of the samples through the scanning eletronic microscopy.
 
WARNING - Viewing this document is conditioned on your acceptance of the following terms of use:
This document is only for private use for research and teaching activities. Reproduction for commercial use is forbidden. This rights cover the whole data about this document as well as its contents. Any uses or copies of this document in whole or in part must include the author's name.
Publishing Date
2016-09-15
 
WARNING: Learn what derived works are clicking here.
All rights of the thesis/dissertation are from the authors
CeTI-SC/STI
Digital Library of Theses and Dissertations of USP. Copyright © 2001-2024. All rights reserved.