• JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
 
  Bookmark and Share
 
 
Master's Dissertation
DOI
https://doi.org/10.11606/D.85.2015.tde-24072015-160216
Document
Author
Full name
Renato Paulo Rezende
E-mail
Institute/School/College
Knowledge Area
Date of Defense
Published
São Paulo, 2015
Supervisor
Committee
Neves, Maurício David Martins das (President)
Berretta, José Roberto
Cozza, Ronaldo Câmara
Title in Portuguese
Soldagem de juntas tubulares de aço inoxidável austenítico AISI 348 para varetas combustíveis em reatores nucleares
Keywords in Portuguese
aço inoxidável
AISI 348
caracterização microestrutural
GTAW
nióbio
propriedades mecânicas
Abstract in Portuguese
Os aços inoxidáveis têm um amplo campo de aplicação, por ter alta resistência mecânica e à corrosão quando trabalha em temperaturas elevadas. Uma aplicação recorrente é em reatores nucleares, podendo ser utilizado no vaso de pressão e nas estruturas de contenção do reator. O aço inoxidável austenítico foi muito utilizado no núcleo de reatores para revestimento do combustível nuclear. No entanto, foi substituído por uma liga de zircônio denominada zircaloy, em consequência da menor absorção de nêutrons térmicos desta liga. Após o acidente de Three Miles Island o aço inoxidável voltou a ser usado para esta aplicação. Para atenuar a corrosão intergranular, muito característica em aços inoxidáveis austeníticos, utiliza-se elementos estabilizantes como o nióbio. O aço inoxidável AISI 348 é estabilizado com nióbio. Neste trabalho, estudou a soldagem de tubos de AISI 348 e tampões de mesmo material soldados pelo processo GTAW (Gas Tungsten Arc Welding) sob diversas condições, procurando-se obter penetração de soldagem de 110 % da espessura do tubo e reforço do cordão de solda inferior a 0,15 mm. As amostras soldadas foram submetidas à caracterização microestrutural com microscopia ótica e microscopia eletrônica, utilizando também a técnica EDS (Espectroscopia de Energia Dispersiva). Foram realizados ensaios mecânicos de tração, fadiga, microdureza Vickers e arrebentamento, como também verificado a susceptibilidade à corrosão intergranular. O cordão de solda passou por ensaios não destrutivos de inspeção visual, dimensional, líquido penetrante, raios X e ensaio de estanqueidade por fuga de gás hélio. A microdureza não apresentou diferenças nas regiões da solda, não sendo possível identificar claramente a zona afetada pelo calor. O arrebentamento ocorreu a uma distância acima de 30 mm do cordão de solda, sendo o resultado considerado aprovado. No ensaio de tração, a ruptura ocorreu no cordão de solda e no metal de base tubo, o local da ruptura dependeu do afastamento lateral do eletrodo em relação à junta soldada. O ensaio de fadiga com corrente de 40 A obteve número de ciclos de 2,14 x 105. Este valor é 50% maior no tempo de vida comparado com amostra de 30 A. No ensaio de corrosão intergranular, as amostras que foram submetidas não apresentaram sensitização no contorno de grão. A análise por EDS identificou áreas com carbonetos oriundos do processo de fabricação do tubo.
Title in English
Weld joints stainless steel tube austenitic AISI 348 for fuel rods in nuclear reactors
Keywords in English
AISI 348
GTAW
mechanical properties and microstructural characterization
niobium
stainless steel
Abstract in English
Stainless steels have a wide range of applications, since it has high mechanical and corrosion resistance when working at elevated temperatures. A recurring application is in nuclear reactors, can be used in the pressure vessel and the reactor containment structures. The austenitic stainless steel has been widely used in the core reactors for nuclear fuel cladding. However, it was replaced with a zirconium alloy called zircaloy, due to lower thermal neutron absorption of this alloy. After the accident at Three Mile Island stainless steel came to be used for this application. In order to mitigate intergranular corrosion, very characteristic in austenitic stainless steel, is used stabilizing elements such as niobium. The stainless steel AISI 348 is stabilized with niobium. In this work, welding AISI 348 tubes and caps of the same material welded by GTAW process (Gas Tungsten Arc Welding) under various conditions, seeking to obtain welding penetration of 110% of the tube thickness and reinforcement of the weld bead less than 0.15 mm. The welded samples were subjected to microstructural characterization with optical and electron microscopy, also using the technique EDS (Energy Dispersive Spectroscopy). Mechanical tests of traction were performed, fatigue, Vickers hardness and burst, but also verified the susceptibility to intergranular corrosion. The weld bead has undergone non-destructive testing visual inspection, dimensional, liquid penetrant, X-rays and leakage test by helium gas leak. The microhardness showed no differences in weld regions, it is not possible to clearly identify the heat affected zone. The burst occurred at a distance of more than 30 mm of the weld bead. In the tensile test, the rupture occurred in the weld bead and base metal tube, the location of rupture depended on the lateral spacing of the electrode in relation to the welded joint. The fatigue test with 40 A current obtained number of cycles of 2.14 x 105. This value is 50% higher in the life time compared with sample 30 A. In the intergranular corrosion test, samples were subjected showed no sensitization in the grain boundary. Analysis by SDS identified areas carbides derived from the tube manufacturing process.
 
WARNING - Viewing this document is conditioned on your acceptance of the following terms of use:
This document is only for private use for research and teaching activities. Reproduction for commercial use is forbidden. This rights cover the whole data about this document as well as its contents. Any uses or copies of this document in whole or in part must include the author's name.
Publishing Date
2015-08-07
 
WARNING: Learn what derived works are clicking here.
All rights of the thesis/dissertation are from the authors
CeTI-SC/STI
Digital Library of Theses and Dissertations of USP. Copyright © 2001-2024. All rights reserved.