• JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
 
  Bookmark and Share
 
 
Master's Dissertation
DOI
https://doi.org/10.11606/D.85.2011.tde-18112011-160321
Document
Author
Full name
Natalia Kondo Monteiro
E-mail
Institute/School/College
Knowledge Area
Date of Defense
Published
São Paulo, 2011
Supervisor
Committee
Fonseca, Fabio Coral (President)
Escote, Marcia Tsuyama
Muccillo, Eliana Navarro dos Santos
Title in Portuguese
Síntese e caracterização de manganita-cromita de lantânio dopada com rutênio para anodos de células a combustível de óxidos sólidos
Keywords in Portuguese
anodo cerâmico
LSCM
manganita-cromita
precursores poliméricos
SOFC
Abstract in Portuguese
Diversos anodos para célula a combustível de óxido sólido (SOFC) têm sido estudados devido aos problemas de deterioração dos anodos tradicionalmente usados, os compósitos à base de zircônia estabilizada/Ni (YSZ/Ni). Estudos prévios evidenciaram que a perovskita La0,75Sr0,25Cr0,50Mn0,50O3 (LSCM) possui desempenho similar em SOFCs usando hidrogênio e metano como combustível, tornando essa cerâmica um possível substituto dos compósitos à base de níquel. No presente estudo, foram sintetizados compostos La0,75Sr0,25Cr0,50-xMn0,50- yRux,yO3 (LSCM-Ru) pelo método dos precursores poliméricos. Análises termogravimétrica e térmica diferencial (TG/ATD) simultâneas e difração de raios X (DRX) foram utilizadas para monitorar a evolução térmica das resinas precursoras e a formação de fase dos compostos. As propriedades elétricas de amostras sinterizadas foram estudadas pela técnica de 4 pontas de prova dc na faixa de temperatura entre 25 °C e 800 °C. Os resultados experimentais indicaram a formação de fase única dos compostos LSCM-Ru calcinados a ~1200 °C. Os parâmetros de rede, calculados a partir dos dados de DRX, revelaram que a substituição parcial dos íons Cr ou Mn pelo Ru não altera significativamente a estrutura cristalina do LSCM até x,y ~ 0,10; uma característica consistente com os raios iônicos similares dos cátions Cr, Mn e Ru com número de coordenação seis. Medidas de resistividade elétrica ao ar mostraram que o mecanismo de transporte não é alterado e que o efeito da substituição de Ru nas propriedades elétricas do composto depende do íon substituído (Cr ou Mn) de maneira consistente com suas substituições parciais. Os testes de SOFCs unitárias revelaram que células com os anodos constituídos por uma camada coletora de corrente do anodo cerâmico LSCM-Ru e uma camada funcional de YSZ/Ni têm desempenho superior a células contendo apenas o anodo cerâmico. As células contendo os anodos cerâmicos LSCM-Ru foram testadas em hidrogênio e etanol, entre 800 °C e 950 °C, e mostraram desempenho em etanol superior ao em hidrogênio; uma característica que foi associada às propriedades de transporte eletrônico dos compostos LSCM-Ru em atmosfera redutora. Os resultados sugerem que os compostos LSCM com substituição parcial de Ru são anodos promissores para SOFC operando com etanol.
Title in English
Synthesis and characterization of manganite-cromite lanthanum doped with ruthenium anodes for solid oxide fuel cells
Keywords in English
ceramic anode
LSCM
manganite-chromite
polymeric precursor
SOFC
Abstract in English
Several anodes for solid oxide fuel cell (SOFC) have been studied because of serious degradation exhibited by the traditionally used yttria-stabilized zirconia/Ni cermets (YSZ/Ni). Previous studies showed that the perovskite La0.75Sr0.25Cr0.50Mn0.50O3 (LSCM) has similar performance in SOFCs running on hydrogen and methane fuels, making such a ceramic a potential alternative to YSZ/Ni cermets. In the present study, compounds La0.75Sr0.25Cr0.50- xMn0.50-yRux,yO3 (LSCM-Ru) were synthesized by the polymeric precursor method. Simultaneous thermogravimetric and differential thermal analysis (TG/DTA) and X-ray diffraction (XRD) were used to monitor the thermal evolution of the precursor resins and the formation of crystalline phases. The electrical properties of sintered samples were studied by the 4-probe dc technique in the temperature range between 25 °C and 800 °C with controlled atmosphere. The experimental results showed the formation of single phase LSCM-Ru compounds after heat treatment at ~ 1200 °C. Lattice parameters, calculated from the XRD data, revealed that the partial substitution of Cr or Mn by Ru has no significant effect on the crystal structure of LSCM up to Ru x,y ~ 0.10; in agreement with the similar ionic radius of Cr, Mn and Ru with coordination number six. Electrical resistivity measurements showed that the transport mechanism is unchanged and that the effect of Ru addition on the electrical properties of the compound depends on the substituted ion (Cr or Mn). Electrochemical tests of SOFCs demonstrated that single cells comprised of a current collector layer of LSCM-Ru ceramic anode and a functional layer for YSZ/Ni have superior performance when compared to single cells with only one layer of the ceramic anode. Single cells with the LSCM-Ru ceramic anode layer were tested under both hydrogen and ethanol fuels, in the 800 °C - 950 °C temperature range. The main results showed that the single fuel cells exhibited higher performance under ethanol than under hydrogen; a feature that was related to the enhanced electronic transport properties of LSCM-Ru in reducing atmosphere. The experimental results suggest that the LSCM-Ru compounds are promising anodes for ethanol fueled SOFCs.
 
WARNING - Viewing this document is conditioned on your acceptance of the following terms of use:
This document is only for private use for research and teaching activities. Reproduction for commercial use is forbidden. This rights cover the whole data about this document as well as its contents. Any uses or copies of this document in whole or in part must include the author's name.
Publishing Date
2011-12-14
 
WARNING: Learn what derived works are clicking here.
All rights of the thesis/dissertation are from the authors
CeTI-SC/STI
Digital Library of Theses and Dissertations of USP. Copyright © 2001-2024. All rights reserved.