• JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
 
  Bookmark and Share
 
 
Tese de Doutorado
DOI
https://doi.org/10.11606/T.85.2017.tde-08022017-145103
Documento
Autor
Nome completo
René Ramos de Oliveira
E-mail
Unidade da USP
Área do Conhecimento
Data de Defesa
Imprenta
São Paulo, 2016
Orientador
Banca examinadora
Lima, Nelson Batista de (Presidente)
Barrios, Daniel Benitez
Couto, Antonio Augusto
Rossi, Jesualdo Luiz
Vatavuk, Jan
Título em português
Estudo do efeito da tensão residual na microdeformação da rede cristalina e no tamanho de cristalito em aço Cr-Si-V jateado com granalhas de aço
Palavras-chave em português
difração de raios-x
microdeformação
tamanho de cristalito
tensão residual
Resumo em português
No presente trabalho foram estudados alguns efeitos causados pelo jateamento por granalhas no aço Cr-Si-V, processo que tem por objetivo aumentar a resistência à fadiga. Para este estudo a variação de parâmetros no processo são ferramentas para melhor compreender os mecanismos que influenciam esta propriedade. Os parâmetros utilizados neste trabalho foram a variação da granalha e o pré tensionamento das amostras aplicados em lâminas utilizadas em feixe de molas automobilísticas de aço de liga cromo silício vanádio (SAE 9254+V). Inicialmente foi realizada a avaliação do perfil de tensão residual, efetuada por difração de raios-x pelo método do sen2 ao longo da espessura na região onde a tensão é compressiva. Nos resultados nota-se um efeito anômalo em relação ao perfil característico da distribuição de tensão residual com a perda de compressão nas camadas iniciais em relação à superfície jateada. Com o uso da microscopia eletrônica de varredura foi observado a região afetada pelo jateamento por granalhas notando que as regiões plasticamente deformadas se encontram nas mesmas regiões onde ocorre a diminuição da tensão residual compressiva. O perfil obtido pela difração de raios-x fornece as informações necessárias com o propósito de conjugar os efeitos que a microtensão (microdeformação) influenciam na macrotensão (tensão residual). Esta relação foi comprovada pela sobreposição dos resultados encontrados na distribuição da microdeformação da rede cristalina com a tensão residual ao longo da espessura na região plasticamente deformada. Os resultados dos perfis das difrações de raios-x mostraram a existência de anisotropia de tensões entre os planos, geradas por defeitos de empilhamento e pela densidade de discordâncias. Assim sendo, para obter os valores das microtensões devem ser considerados os fatores das constantes elásticas (conforme o módulo das direções) e dos planos cristalográficos. O método aplicado foi o Williamson-Hall modificado. Além deste método outros também foram utilizados, tais como: método de Warren-Averbach e o método Single Line, este aplicando a série de Fourier, porém, ao observar os resultados, nota-se a diferença entre os valores obtidos nas deformações, tanto aos métodos quanto aos planos cristalográficos, porém a ênfase deste trabalho foi dada às características dos perfis da distribuição e não aos valores absolutos. Somando a isto, foi proporcionado o estudo da distribuição do tamanho médio de cristalito ao longo da espessura no perfil das difrações de raios-x e os resultados mostraram que esta distribuição varia de forma inversa a microdeformação. A relação entre o tamanho médio de cristalito e a variação das distâncias interplanares corresponde diretamente a alterações das densidades de discordâncias ocorridas no material que por sua vez estão ligadas às microdeformações da rede cristalina. Como complemento ao trabalho foram analisados o fator de concentração de tensão e ensaios de fadiga do material. O fator de concentração de tensão não variou conforme a utilização das granalhas S330 e S390, ambas sendo aplicadas no mesmo regime de jateamento. Os ensaios de fadiga indicaram que o pré tensionamento aumenta a vida útil nas tensões cíclicas do material estudado.
Título em inglês
Study of the effect of residual stress on the microstrain of the crystalline lattice and on the crystalite size of steel Cr-Si-V BY shot peening
Palavras-chave em inglês
crystallite size
microstrain
residual stress
X-ray diffraction
Resumo em inglês
In the present work, some effects caused by jateamento por granalhas on Cr-Si-V steel have been studied, a process that aims to increase fatigue resistance. For this study the variation of parameters in the process are tools to better understand the mechanisms that influence this property. The parameters used in this work were the variation of the grit and the pre-tensioning of the samples applied in leafs used in automotive springs of chrome silicon vanadium alloy steel (SAE 9254 + V). Initially the evaluation of the residual stress profile was performed by x-ray diffraction using the sen2 method along the thickness in the region where the stress is compressive. The results show an anomalous effect in relation to the characteristic profile of the residual stress distribution with the decrease of compression in the initial layers in relation to the blasted surface. With the use of scanning electron microscopy, the region affected by grit blasting was observed, noting that the plastically deformed regions are located in the same regions where the compressive residual stress decrease. The profile obtained by X-ray diffraction provides necessary information with the aim of combining the effects of microstress (microstrain) on macrostress (residual stress). This relationship was confirmed by the overlap of the results found in the distribution of the microstrain of the crystalline lattice with the residual stress along the thickness in the plastically deformed region. The results of the x-ray diffraction tests show an existence of tensile anisotropy between the planes generated by stacking faults and the dislocations density. Therefore, to obtain the values of the microstress must be considered the factors of the elastic constants and the crystallographic planes. The method applied was the modified Williamson-Hall. Beyound this method, others were also used, such as: Warren-Averbach method and the Single Line method, this applying the Fourier series, however, when observing the results, we can notice the difference between the values obtained in the deformations, however, the emphasis of this work was on the characteristics of the distribution profiles and not on the absolute values. In addition, the study of the distribution of the mean crystallite size along the thickness of the X-ray diffraction profile was provided and the results showed that this distribution varies inversely with microstrain. The relationship between the mean crystallite size and the variation of the interplanar distances corresponds directly to changes in the densities of dislocations occurring in the material, which in turn are linked to the microstrain of the crystalline lattice. As a complement to the work, the stress concentration factor and fatigue tests of the material were analyzed. The stress concentration factor did not change according to the use of the S330 and S390 grit, both being applied in the same blasting regime. Fatigue tests indicated that pretensioning increases the useful life of the cyclic stresses of the material studied.
 
AVISO - A consulta a este documento fica condicionada na aceitação das seguintes condições de uso:
Este trabalho é somente para uso privado de atividades de pesquisa e ensino. Não é autorizada sua reprodução para quaisquer fins lucrativos. Esta reserva de direitos abrange a todos os dados do documento bem como seu conteúdo. Na utilização ou citação de partes do documento é obrigatório mencionar nome da pessoa autora do trabalho.
Data de Publicação
2017-04-12
 
AVISO: Saiba o que são os trabalhos decorrentes clicando aqui.
Todos os direitos da tese/dissertação são de seus autores
CeTI-SC/STI
Biblioteca Digital de Teses e Dissertações da USP. Copyright © 2001-2024. Todos os direitos reservados.