• JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
 
  Bookmark and Share
 
 
Doctoral Thesis
DOI
https://doi.org/10.11606/T.85.2013.tde-03042013-091008
Document
Author
Full name
Rudy Crisafulli
E-mail
Institute/School/College
Knowledge Area
Date of Defense
Published
São Paulo, 2013
Supervisor
Committee
Spinacé, Estevam Vitorio (President)
Poço, João Guilherme Rocha
Silva, Dionisio Furtunato da
Tusi, Marcelo Marques
Vaz, Jorge Moreira
Title in Portuguese
Preparação de eletrocatalisadores PtSnCu/C e PtSn/C e ativação por processos de Dealloying para aplicação na oxidação eletroquímica do Etanol
Keywords in Portuguese
célula a combustível
eletrocatalisador PtSn/C
eletrocatalisador PtSnCu/C
etanol
lixiviação seletiva
Abstract in Portuguese
Foram preparados eletrocatalisadores PtSnCu/C (com diferentes razões atômicas Pt:Sn:Cu) e PtSn/C (50:50) com 20 % em massa de metais pelos métodos da redução por borohidreto (IRB) e redução por álcool (RA). Utilizou-se H2PtCl6.6H2O, SnCl2.2H2O e CuCl2.2H2O como fonte de metais, NaBH4 e etilenoglicol como agentes redutores, 2-propanol e etilenoglicol/água como solventes e carbono como suporte. Numa segunda etapa, estes eletrocatalisadores foram ativados pelos processos de dealloying químico (DQ), por tratamento com HNO3 e dealloying eletroquímico (DE), utilizando a técnica de eletrodo de camada fina porosa. Os materiais obtidos foram caracterizados por energia dispersiva de raios-X (EDX), difração de raios-X (DRX), microscopia eletrônica de transmissão (MET), energia dispersiva de raios-X de varredura linear (EDX-VL) e voltametria cíclica (VC). Estudos eletroquímicos para a oxidação eletroquímica do etanol foram realizados por voltametria cíclica, cronoamperometria e células unitárias (conjunto eletrodos/membrana). Os efluentes anódicos provenientes dos testes em células unitárias foram analisados por cromatografia a gás de alta eficiência (CG). Os difratogramas de raios-X dos eletrocatalisadores sintetizados mostraram a típica estrutura cúbica de face centrada (CFC) de liga de platina e após tratamento por dealloying, observou-se que a estrutura (CFC) foi preservada. O tamanho de cristalito dos eletrocatalisadores como preparados variou na ordem de 2 nm a 3 nm e, após processos de dealloying, não foram observadas variações de tamanho significativas. Análises por EDX dos eletrocatalisadores como preparados mostraram similaridade entra a razão atômica Pt:Sn e Pt:Sn:Cu obtida e a nominal. Após dealloying químico e eletroquímico, observou-se variação nas razões atômicas Pt:Sn e Pt:Sn:Cu, indicando a remoção parcial de Cu e Sn. Contudo, o processo de dealloying químico mostrou-se mais eficiente para a remoção de Cu e o dealloying eletroquímico para a remoção de Sn. As análises por EDX-VL mostraram que os processos de dealloying foram efetivos na remoção dos átomos mais superficiais de Cu e/ou Sn da estrutura CFC da Pt. Os resultados obtidos por cronoamperometria e voltametria cíclica mostraram que os eletrocatalisadores com teores de Pt maiores ou iguais a 30 %, após dealloying químico e eletroquímico apresentaram melhora significativa na atividade eletrocatalítica para a oxidação eletroquímica do etanol no potencial de interesse (0,5 V). Os eletrocatalisadores que apresentaram maior eficiência para oxidação eletroquímica do etanol foram PtSn/C (50:50) IRB/DE > PtSnCu/C (50:40:10) RA/DE > PtSnCu/C (50:10:40) IRB/DQ. Foram testados em células unitárias alimentadas diretamente com etanol os eletrocatalisadores PtSn/C (50:50) IRB/DQ, PtSnCu/C (50:10:40) IRB/DQ, PtSnCu/C (50:40:10) RA/DQ e os eletrocatalisadores comerciais Pt/C BASF e PtSn/C (75:25) BASF. Os eletrocatalisadores apresentaram a seguinte ordem de desempenho: PtSn/C (50:50) IRB/DQ > PtSnCu/C (50:40:10) RA/DQ > PtSn/C (75:25) BASF > PtSnCu/C (50:10:40) IRB/DQ > Pt/C BASF. Análises por cromatografia gasosa dos efluentes anódicos desses eletrocatalisadores mostraram formação de ácido acético e acetaldeído como produtos principais.
Title in English
Preparation of PtSnCu/C and PtSn/C electrocatalysts and activation by dealloying processes for ethanol electro-oxidation
Keywords in English
dealloying
ethanol
fuel cell
PtSn/C electrocatalyst
PtSnCu/C electrocatalyst
Abstract in English
PtSnCu/C (with different Pt:Sn:Cu atomic ratios) and PtSn/C (50:50) electrocatalysts were prepared by borohydride (BR) and alcohol-reduction (AR) processes using H2PtCl6.6H2O, SnCl2.2H2O and CuCl2.2H2O as metal sources, NaBH4 and ethylene glycol as reducing agents, 2-propanol and ethylene glycol/water as solvents and carbon black as support. In a further step, these electrocatalysts were activated by chemical (CD) and electrochemical (ED) dealloying processes through acid treatment and thin porous coating technique, respectively. These materials were characterized by energy dispersive X-ray, X-ray diffraction, transmission electron microscopy, line scan energy dispersive X-ray and cyclic voltammetry. Electrochemical studies for ethanol electro-oxidation were performed by cyclic voltammetry, chronoamperometry and in single Direct Ethanol Fuel Cell using Membrane Electrode Assembly (MEA). The anodic efluents were analised by gas chromatrography. The X-ray diffractograms of the as-synthesized electrocatalysts showed the typical face-centered cubic structure (FCC) of platinum and its alloys. After dealloying, the X-ray diffractograms showed that the Pt FCC structure was preserved. The crystallite sizes of the as-synthesized electrocatalysts were in the range of 2 nm to 3 nm and after dealloying there were no significant variations in sizes. The energy dispersive X-ray analysis of the as-synthesized electrocatalysts showed a Pt:Sn and Pt:Sn:Cu atomic ratios similar to the nominal values. After chemical and electrochemical dealloying of the electrocatalysts the ranged Pt:Sn and Pt:Sn:Cu atomic ratios showed that Cu and Sn atoms were removed. However, chemical dealloying process proved to be more efficient for removing Cu and electrochemical dealloying for removing Sn. The line scan energy dispersive X-ray analysis showed that acid and electrochemichel treatments were efficient to dealloying Cu and/or Sn superficial atoms of the FCC structure of Pt. The results obtained by cyclic voltammetry and chronoamperometry showed that electrocatalysts containing 30 at % or more of platinum, after chemical and electrochemical dealloying had significant improvement in electrocatalytic activity for ethanol electro-oxidation in the potential of interest. The electrocatalysts with higher efficiency for electrochemical oxidation of ethanol were PtSn/C (50:50) BR/ED > PtSnCu/C (50:40:10) AR/ED > PtSnCu/C (50:10:40) BR/CD. PtSn/C (50:50) BR/CD, PtSnCu/C (50:10:40) BR/CD, PtSnCu/C (50:40:10) AR/CD electrocatalysts and Pt/C BASF, PtSn/C (75:25) BASF commercial electrocatalysts were tested in single Direct Ethanol Fuel Cell. The results showed the following peformance for ethanol electro-oxidation: PtSn/C (50:50) BR/CD > PtSnCu/C (50:40:10) AR/CD > PtSnCu/C > PtSn/C (75:25) BASF > PtSnCu/C (50:10:40) BR/CD > Pt/C BASF.
 
WARNING - Viewing this document is conditioned on your acceptance of the following terms of use:
This document is only for private use for research and teaching activities. Reproduction for commercial use is forbidden. This rights cover the whole data about this document as well as its contents. Any uses or copies of this document in whole or in part must include the author's name.
Publishing Date
2013-04-16
 
WARNING: Learn what derived works are clicking here.
All rights of the thesis/dissertation are from the authors
CeTI-SC/STI
Digital Library of Theses and Dissertations of USP. Copyright © 2001-2024. All rights reserved.