• JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
 
  Bookmark and Share
 
 
Master's Dissertation
DOI
https://doi.org/10.11606/D.76.2012.tde-05112012-155605
Document
Author
Full name
Andres David Rodriguez Salas
Institute/School/College
Knowledge Area
Date of Defense
Published
São Carlos, 2012
Supervisor
Committee
Courteille, Philippe Wilhelm (President)
Magalhães, Daniel Varela
Vianna, Sandra Sampaio
Title in Portuguese
Geração de uma armadilha magneto-óptica de estrôncio 88
Keywords in Portuguese
Armadilha magneto-óptica
Estrôncio
Resfriamento de átomos
Abstract in Portuguese
Neste trabalho é apresentada a construção da montagem de um sistema experimental para resfriar átomos de estrôncio. A construção do sistema está focada no estudo do espalhamento coletivo em nuvens atômicas frias e ultrafrias por meio da teoria de Mie. O estrôncio é um elemento que conta com dois estágios de resfriamento, o primeiro utilizando a transição forte entre estados singletos ¹S₀-¹P ₁ de Γ = (2 π)32 MHz, e o segundo com uma transição fraca entre estados singleto e tripleto ¹S₀-³P₁ de Γ = (2 π)7,5 MHz. O objetivo deste trabalho é a construção do sistema para resfriar átomos de estrôncio utilizando a primeira transição. A construção do sistema se apresenta em várias partes, primeiro a construção do um forno como fonte de vapor de estrôncio, onde o estrôncio metálico é aquecido até uma temperatura T = 600°C. O forno conta com um sistema de microtubos encarregados de colimar o feixe atômico, estes microtubos tem um diâmetro interno D ≈ 180µm e um comprimento de 8mm. Depois da implementação do forno e do sistema de microtubos foi medido o perfil de velocidades transversais e a divergência do feixe atômico que sai do forno. A largura tem um valor wr = (2π)108 MHze a divergência do feixe de α ≈4,12. A segunda parte do sistema conta com a construção do desacelerador Zeeman, responsável por desacelerar os átomos do feixe atômico utilizando um feixe laser contrapropagante de λ=461 nm, circularmente polarizado e com uma dessintonização utilizada, após a caracterização do sistema, de Δ=(-2π)580MHz. Os átomos sentiram os efeitos da força de pressão radiativa dentro de um tubo de comprimento de 0,28m. Para compensar o efeito Doppler causado pelo movimento dos átomos foi utilizado um arranjo de bobinas em configuração spin flip para gerar o campo. A terceira e principal parte do sistema foi a construção da armadilha magnetoóptica (AMO). Onde os átomos que saem do desacelerador Zeeman são confinados e resfriados pela combinação de seis feixes contrapropagantes, dos quais três são retrorefletidos utilizando a transição Γ=(2π)32MHz. A dessintonia dos feixes após da caracterização do sistema foi de Δ=(-2π)39MHz. Depois da construção do sistema foi feita a primeira caracterição da armadilha magneto-óptica de átomos de estrôncio 88 em nosso grupo, onde obtivemos a temperatura dos átomos na armadilha para o eixo vertical da expansão foi de Tv=4.7mK e para o eixo horizontal de TH=4mK. Também foi medido o tempo de carga dos átomos na armadilha tcarga=0.15s como bombeamento óptico de estado ³P₂-³D₂. O tempo de vida foi de 0.3s e 0.03s com e sem bombeamento óptico, respectivamente.
Title in English
Generation of a magneto-optical trap of strontium 88
Keywords in English
cold atoms
Magneto-optical Trap
Strontium
Abstract in English
This work presents the construction of the assembly of an experimental system for cooling strontium atoms. The construction of the system is focused on the collective scattering in atomic cold cloud and ultra cold using the Mie theory. The strontium is an element that permits two stage of cooling, the first using the strong transition between singlet states ¹S₀-¹P₁ of Γ=(2π) 32 MHz, and a second stages is the weak transition between singlet and triplet states ¹S₀-³P₁ de Γ=(2π) 7.5MHz. The objective of this work is building the system for cooling strontium atoms using the first transition. The construction of the system is presented in several parts. First is described the construction of oven as vapor source strontium, where the strontium metal is heated to Temperature Range T = 600°C. The oven has a microtubule system responsible for collimating the atomic beam, these microtubules has an internal diameter of D ≈ 180µm and a length of 8mm. After implementation of the oven system and the microtubes were measured transverse velocity profile and the divergence of the atomic beam that leaves the oven, the width value was f wr=(2π)108MHzand beam divergence value was α ≈ 4,12. The second part of the system relies on the construction of the Zeeman slower responsible for decelerating the atoms of the atomic beam using a laser beam antipropagating of λ = 461 nm nm with a circularly polarized , the detuning used after of the characterization of the system was Δ = (2π)580 MHz. Atoms felt the effects of pressure force radiative within a tube length of 0.28m to compensate the Doppler shift due to motion a of atoms used an arrangement of coils in configuration "spin flip" to generate the magnetic field to compensate this effect. The third and main part of the system was the construction of magneto-optical trap (MOT), the atoms coming out of the Zeeman decelerator are confined and cooled by a combination of six counterpropagating beams, three of which are retro reflected using the transition Γ = (2π)32MHz, the detuning of the beam after the characterization of the system was Δ = (-2π) 39 MHz and the opposite polarization for each pair of beam in the same direction. After the construction of the system was made the first magneto-optical trap of strontium atoms 88, the temperature of the trap was atoms to the vertical he expansion was Tv = 4.7mK and the horizontal axis TH = 4 mK 4, also was measured loading time of the atoms in the trap tcharge = 0.15s as optical pumping state ³P₂- ³D₂. The lifetime with and without optical pumping was tlife = 0.3s and tlife = 0.03s respectively.
 
WARNING - Viewing this document is conditioned on your acceptance of the following terms of use:
This document is only for private use for research and teaching activities. Reproduction for commercial use is forbidden. This rights cover the whole data about this document as well as its contents. Any uses or copies of this document in whole or in part must include the author's name.
Publishing Date
2013-03-28
 
WARNING: Learn what derived works are clicking here.
All rights of the thesis/dissertation are from the authors
CeTI-SC/STI
Digital Library of Theses and Dissertations of USP. Copyright © 2001-2024. All rights reserved.