• JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
 
  Bookmark and Share
 
 
Doctoral Thesis
DOI
https://doi.org/10.11606/T.46.1998.tde-17112014-151032
Document
Author
Full name
Denise Villela Barcza Stockler Pinto
E-mail
Institute/School/College
Knowledge Area
Date of Defense
Published
São Paulo, 1998
Supervisor
Committee
Agostinho, Silvia Maria Leite (President)
Angnes, Lucio
Gutz, Ivano Gebhardt Rolf
Panossian, Zehbour
Pessine, Elisabete Jorge
Title in Portuguese
Eletrorrevestimento de substratos metálicos com tântalo em meio de fluoretos fundidos; caracterização física e eletroquímica dos revestimentos
Keywords in Portuguese
Corrosão
Eletrodeposição
Eletroquímica
Físico-química
Fluoretos fundidos
Tântalo
Abstract in Portuguese
O estudo do eletrorrevestimento de tântalo sobre aço e sobre cobre foi realizado na mistura eutética FLINAK (29,2% LiF - 11,7% NaF - 59,1% KF - % em massa) contendo 15% em massa de K2TaF7. Foram estudadas as influências da densidade de corrente catódica, do tempo de eletrólise, da temperatura e da natureza do substrato sobre as eficiências de correntes catódicas e a morfologia dos revestúnentos. Depósitos de tântalo lisos, brilhantes, aderentes e uniformes foram obtidos com alta eficiência de corrente catódica usando os seguintes parâmetros: densidade de corrente catódica de 23 mA/cm2 a 50 mA/cm2, temperatura de 750°C e tempo de eletrólise de 30 minutos a 120 minutos. Os revestimentos obtidos nestas condições possuem espessuras de 18 µm a 41 µm. Os depósitos de tântalo sobre aço e sobre cobre são constituídos de tântalo puro, sem formação de camada de difusão. Ensaios de eletrodeposição de camadas delgadas de tântalo em catodos de formas e geometrias complexas mostraram o bom poder de cobertura do tântalo. Curvas potencial de circuito aberto x tempo, feitas à temperatura ambiente em soluções de ácido nítrico a 40%, a 50% e a 60% em massa, ácido clorídrico a 3,6% em massa e ácido sulfúrico a 80% em massa, mostraram ótima concordância entre o potencial de circuito aberto estacionário do tântalo maciço comercial e dos revestimentos de tântalo sobre cobre nestes meios. Curvas potencial de circuito aberto x tempo feitas à temperatura ambiente em meio de ácido clorídrico a 3,6% em massa, para revestimentos sobre aço mostraram que a semelhança com o tântalo maciço só é observada em depósitos recentes, o que foi atribuído à difusão do ferro do substrato para a superficie do revestimento. Ensaios gravimétricos mostraram que a velocidade de corrosão dos revestimentos é comparável com a do tântalo comercial, em meios de ácido nítrico a 40% e a 50% em massa, à temperatura de ebulição.
Title in English
Electro-coating of metal substrates with tantalum amid molten fluorides; Physical and electrochemical characterization of coatings
Keywords in English
Corrosion
Electrochemistry
Electrodeposition
Fused fluorides
Physical chemistry
Tantalum
Abstract in English
The study of tantalum electroplating on copper and carbon steel has been carried out in FLINAK eutectic (29.2% LiF -11.7% NaF -59.1% KF - wt%) containing 15wt% K2TaF7. The effects of current cathodic density, time of electrolysis, temperature and substrate kind have been studied in relation to the cathodic current efficiencies and the coating morphology. Tantalum deposits, with good smoothness, brightness, adherence and uniformity were obtained with high cathodic efficiency, using the following conditions: 23 mA/cm2 to 50 mA/cm2 cathodic current densities, 30 minutes to 120 minutes electrolysis time interval and 750°C temperature. Under these conditions the coatings are about 18 µm to 41 µm thick. The deposits obtained on carbon steel and copper are both constituted of pure tantalum without formation of interdiffusion layer. The results of tantalum thin coatings electrodeposition on cathodes of complex geometrics and shapes showed the good throwing power of tantalum. Open circuit potential x time curves have been recorded for massive tantalum and for tantalum coatings on copper in 40 wt%, 50 wt% and 60 wt% nitric acid, 3.6 wt% hydrochloric acid and 80 wt% sulfurie acid at room temperature. They showed similar stationary open-circuit poteutial values for both the massive tantalum and the tantalum coatings. Open circuit potential x time curves for tantalum coatings on carbon steel performed in 3.6%wt hydrochloric acid at room temperature showed that the similarity with massive tantalum exists only with recent deposits, because of iron diffusion from substrate to coating surface. Gravimetric tests showed comparable corrosion rate values for massive tantalum and tantalum coatings in boiling 40wt% and 50wt% nitric acid.
 
WARNING - Viewing this document is conditioned on your acceptance of the following terms of use:
This document is only for private use for research and teaching activities. Reproduction for commercial use is forbidden. This rights cover the whole data about this document as well as its contents. Any uses or copies of this document in whole or in part must include the author's name.
Publishing Date
2014-11-17
 
WARNING: Learn what derived works are clicking here.
All rights of the thesis/dissertation are from the authors
CeTI-SC/STI
Digital Library of Theses and Dissertations of USP. Copyright © 2001-2024. All rights reserved.