• JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
 
  Bookmark and Share
 
 
Master's Dissertation
DOI
https://doi.org/10.11606/D.46.2005.tde-02122014-174326
Document
Author
Full name
Edson Barbosa de Sousa
E-mail
Institute/School/College
Knowledge Area
Date of Defense
Published
São Paulo, 2005
Supervisor
Committee
Faria, Dalva Lucia Araujo de (President)
Bertotti, Mauro
Rocha Filho, Romeu Cardozo
Title in Portuguese
Estudo espectroscópico e eletroquímico da redução de íons perclorato sobre superfícies eletromodificadas de estanho
Keywords in Portuguese
Efeito raman
Eletrodo
Eletroquímica
Espectroscopia infravermelha
Espectroscopia raman
Abstract in Portuguese
Medidas eletroquímicas, incluindo cronoamperometria, voltametria cíclica, procedimentos eletroquímicos de envelhecimento de filmes superficiais, espectroscopia de absorção no infravermelho, espectroscopia Raman in situ e ex situ, incluindo o efeito SERS, foram empregados no estudo da redução eletroquímica de íons perclorato a cloreto sobre eletrodo de estanho. Solução de perclorato de sódio 0,5 mol L-1 foi utilizada como eletrólito. Observou-se que a concentração máxima de cloreto produzida em decorrência da redução de íons perclorato (5,0 x 10-5 mol L-1) ocorre na região de potenciais localizada no final da contribuição de corrente da dupla camada elétrica e início da região de desprendimento de hidrogênio. A concentração limite de cloreto é decorrente do estabelecimento de um equilíbrio entre os íons cloreto na solução e cloreto adsorvido que inativa os sítios na superfície, impedindo a continuidade do processo. Programas de perturbação de potencial visando a eletromodificação da superfície do estanho foram aplicados, com o objetivo de verificar a ocorrência de mudanças das propriedades eletrocatalíticas dessas superfícies. A influência das variáveis, velocidade da perturbação, tempo de duração e limites de potencial na cinética de redução de perclorato e na concentração máxima de cloreto foi estudada. Em todos os casos a concentração máxima de cloreto detectada na solução foi de 2,0 x 10-5 mol L-1, exceto no tratamento de ativação eletroquímica quando essa concentração atinge 5,0 x 10-5 mol L-1. A influência da presença de óxidos superficiais, temperatura e agitação da solução, pH, e tempo de polarização no processo de redução de perclorato também foi avaliada. Concluiu-se que (i) a presença de óxidos catalisa o processo de redução; (ii) a influência da temperatura é significativa a 70 °C; (iii) a agitação e o pH da solução não exercem influência na concentração máxima de cloreto produzida e (iv) a concentração máxima de cloreto estabiliza-se após cerca de 150 minutos de polarização.
Title in English
Study of spectroscopic and electrochemical reduction perchlorate ions on tin surfaces electromodified
Keywords in English
Electrochemistry
Electrode
Infrared spectroscopy
Raman effect
Raman spectroscopy
Abstract in English
Electrochemical measurements including chronoamperometry, cyclic voltammetry, film surface electrochemical ageing procedures, FTIR and Raman spectroscopy including the SERS effect were carried out in order to study the electrochemical reduction of perchlorate ions at tin electrodes. Sodium perchlorate solution 0.5 mol L-1 was employed as electrolyte. It was observed that maximum chloride concentration produced by the perchlorate reduction (5.0 x 10-5 mol L-1), takes place within a potential range comprising the negative side of de double layer region and the positive side of the hydrogen evolution region. The upper limit of chloride concentration occurs due to the establishment of an equilibrium between the chloride ions in solution and the adsorbed chloride ions that blocks the surface sites where the reduction process takes place. In order to electromodify the tin surface, the electrode was subjected to perturbing potential programs, aiming to evaluate changes in the electrocatalytic properties of the modified sufaces. The influence of the experimental variables perturbation sweep rate as well as perturbation time and potential limits on the perchrolate reduction kinetic and on the maximum chloride concentration was studied. Except to the activation treatment, the maximum chloride concentration was 2.0 x 10-5 mol L-1 for all the applied perturbation programs. The influence of the oxides on the electrode surface, stirring, temperature, pH and polarization time on the reduction process was evaluated too. It was shown that (i) the presence of oxides on the electrode surface favors the reduction reaction; (ii) there is significant influence of temperature at 70 °C; (iii) pH and stirring the solution exerts no influence on the maximum chloride concentration produced and (iv) the maximum chloride concentration produced by electroreduction is reached after 150 minutes.
 
WARNING - Viewing this document is conditioned on your acceptance of the following terms of use:
This document is only for private use for research and teaching activities. Reproduction for commercial use is forbidden. This rights cover the whole data about this document as well as its contents. Any uses or copies of this document in whole or in part must include the author's name.
Publishing Date
2014-12-04
 
WARNING: Learn what derived works are clicking here.
All rights of the thesis/dissertation are from the authors
CeTI-SC/STI
Digital Library of Theses and Dissertations of USP. Copyright © 2001-2024. All rights reserved.