• JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
 
  Bookmark and Share
 
 
Master's Dissertation
DOI
https://doi.org/10.11606/D.44.2017.tde-22082017-094148
Document
Author
Full name
Celso Bairros Varella Neto
E-mail
Institute/School/College
Knowledge Area
Date of Defense
Published
São Paulo, 2017
Supervisor
Committee
Taioli, Fabio (President)
Prado, Renato Luiz
Bacci, Denise de La Corte
Title in Portuguese
Desenvolvimento e construção de um sismógrafo para monitoramento de vibrações e pressão acústica
Keywords in Portuguese
Desmonte de rochas
Sismógrafo
Sismologia
Vibrações do terreno
Abstract in Portuguese
Esta pesquisa apresenta o projeto, construção e testes, tanto de laboratório como de campo de um sismógrafo de engenharia para o monitoramento dos níveis de vibração e pressão acústica, resultantes do processo de desmonte de rocha utilizando explosivos. Desenvolveram-se filtros e amplificadores com características que atendam às especificações impostas pelo guia intitulado "ISEE Performance Specifications for Blasting Seismographs" (ISEE, 2011), bem como, foram utilizados sensores (geofones e microfone) desenvolvidos e fabricados por terceiros, mas que atendam às características impostas pelo guia. A interconexão entre a etapa analógica com a digital foi realizada através da utilização de módulos de conversão A/D com tecnologia Sigma-Delta e resolução de 24-bits. Todas as etapas de aquisição, processamento e armazenamento de dados são controladas através de um microcontrolador ARM Cortex-M de 32-bits, o qual provê os mais diversos e modernos periféricos. Os testes de laboratório demonstraram a eficácia dos circuitos analógicos, pois apresentaram resposta plana na banda de passagem, onde os filtros passa-baixa, do tipo Butterworth, proporcionaram uma atenuação de 36 dB/oitava a partir da frequência de corte de 500 Hz, enquanto os filtros passa-alta, do tipo passivo, proporcionaram uma atenuação de 6 dB/oitava abaixo da frequência de corte de 2 Hz. Os testes de operação confirmaram a fácil e rápida operação do conjunto sismográfico, enquanto os testes de campo demonstraram a praticidade de sua operação e confiabilidade e coerência dos resultados. Concluiu-se que o sistema é exequível, atendendo às necessidades de monitoramento de um processo de desmonte de rochas utilizando explosivos a um preço relativamente baixo, abrindo a possibilidade de utilizá-lo em monitoramentos permanentes em situações onde isto seja necessário.
Title in English
not available
Keywords in English
Rock blasting
Seismograph
Seismology
Vibrations of the terrain
Abstract in English
This research presents the design, construction and laboratory and field testing of an engineering seismograph for monitoring vibration and acoustic pressure levels during rock blasting. Filters and amplifiers with characteristics that meet the specifications of ISEE Performance Specifications for Blasting Seismographs (ISEE, 2011) have been developed. Third part sensors (geophones and microphones) were selected to attend the characteristics suggested by the guide. The interconnection between the analog and the digital stages was accomplished with A/D conversion modules with Sigma- Delta technology and 24-bit resolution. All data acquisition, processing and storage steps are controlled by a 32-bit ARM Cortex-M microcontroller, which provides several and modern peripherals. Laboratory tests confirmed the effectiveness of the analog circuits that presented flat response between 2 and 500Hz. The low-pass filters developed are type Butterworth with an attenuation factor of 36 dB/octave for frequencies above 500 Hz. The high-pass filters are of passive type with rejection factor of 6 dB/octave below 2 Hz. The operation of the system presented to be easy and fast. Field tests demonstrated its friendliness and the results showed to be consistent. It was concluded that the system is feasible and applicable to monitor rock-blasting process. Its relatively low price opens up the possibility of using it for permanent monitoring in situations where this might be necessary.
 
WARNING - Viewing this document is conditioned on your acceptance of the following terms of use:
This document is only for private use for research and teaching activities. Reproduction for commercial use is forbidden. This rights cover the whole data about this document as well as its contents. Any uses or copies of this document in whole or in part must include the author's name.
Publishing Date
2017-08-23
 
WARNING: Learn what derived works are clicking here.
All rights of the thesis/dissertation are from the authors
CeTI-SC/STI
Digital Library of Theses and Dissertations of USP. Copyright © 2001-2024. All rights reserved.