• JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
 
  Bookmark and Share
 
 
Disertación de Maestría
DOI
https://doi.org/10.11606/D.3.2009.tde-13102009-151346
Documento
Autor
Nombre completo
Marcos Alves Rabelo
Dirección Electrónica
Instituto/Escuela/Facultad
Área de Conocimiento
Fecha de Defensa
Publicación
São Paulo, 2009
Director
Tribunal
Pesce, Celso Pupo (Presidente)
Martins, Clóvis de Arruda
Vaz, Murilo Augusto
Título en portugués
Estudo experimental do comportamento estrutural de barras curvas.
Palabras clave en portugués
Barras
Estabilidade
Estruturas (comportamento estrutural)
Flambagem
Resumen en portugués
A presente dissertação trata do estudo experimental do comportamento estrutural de barras helicoidais assentadas sobre superfície cilíndrica e sujeitas a cargas de compressão. Aparato experimental específico foi projetado e construído para este fim. O projeto, bem como a aferição deste aparato, é descrito em detalhes. Este aparato permite ajustar as barras através de um sistema de apoios constituídos por uma série de rolamentos, que podem ser posicionados de forma a conferir liberdade de deslocamento à barra em duas direções distintas: radial (normal à superfície cilíndrica de assentamento) e lateral (tangencial; bi-normal). A aplicação de carga compressiva se faz na direção tangencial à hélice não-deformada. Barras com seção transversal circular e retangular, com diversos comprimentos livres de flambagem e para diferentes ângulos de assentamento, foram ensaiadas. Estudos preliminares, com barras retas, permitiram avaliar as condições efetivas de engastamento proporcionadas pelo aparato. Nestes casos foi possível induzir o fenômeno de flambagem, recuperando-se, consistentemente, os valores de cargas críticas previstas pela teoria de Euler e avaliando-se o grau de engastamento proporcionado pelo aparato experimental. Filmagem com câmera de alta velocidade permitiu observar o fenômeno de instabilidade. O comportamento estrutural das barras curvas, de seção circular e retangular, foi então estudado. Tanto o comprimento livre quanto o ângulo de assentamento foi variado. O estudo permitiu levantar base de dados experimentais do comportamento de barras helicoidais nessas condições de carregamento e de condições de contorno. No entanto, para nenhuma das diversas condições ensaiadas foi possível induzir o fenômeno de instabilidade. Tal fato poderia dar subsídios a inferências acerca do estudo da instabilidade de tubos flexíveis do tipo birdcaging.
Título en inglés
Experimental study of structural behavior of curved bars.
Palabras clave en inglés
Bending
Buckling
Helix
Instability
Stability
Structural behaviour
Structures
Torsion
Resumen en inglés
This dissertation deals with an experimental study on the structural behavior of bars supported on a helical cylindrical surface and subject to compressive loads. A special experimental apparatus was designed and built for this purpose. The design, as well as the adjustment of such an apparatus is described in details. The device allows one adjusting the bars by using a system consisting of a series of bearings that can be positioned to give freedom to the structure in two different directions: radial (normal to the cylindrical surface) and lateral (tangential or bi-normal). The compressive load is applied in the tangential direction of the helix. Bars with circular and rectangular cross sections, with various buckling lengths and different helix angles, were tested. Preliminary studies with straight bars, have allowed to evaluate the boundary conditions offered by the apparatus. In these cases, it was possible to induce the phenomenon of buckling, obtaining, consistently, the values of critical loads provided by the theory of Euler and to evaluate the boundary conditions provided by the apparatus. The use of a high-speed camera allowed to observe the phenomenon of instability. The structural behavior of curved bars of circular and rectangular sections was also studied. Both, the test free length as the helix angle were varied. The study enabled us to get a huge amount of experimental data about the behavior of helical bars, subjected such loading and boundary conditions. However, the phenomenon of instability could not be induced, for any condition tested. This fact could collaborate for further inferences about the study of the birdcaging instability at flexible pipes.
 
ADVERTENCIA - La consulta de este documento queda condicionada a la aceptación de las siguientes condiciones de uso:
Este documento es únicamente para usos privados enmarcados en actividades de investigación y docencia. No se autoriza su reproducción con finalidades de lucro. Esta reserva de derechos afecta tanto los datos del documento como a sus contenidos. En la utilización o cita de partes del documento es obligado indicar el nombre de la persona autora.
Fecha de Publicación
2010-05-20
 
ADVERTENCIA: El material descrito abajo se refiere a los trabajos derivados de esta tesis o disertación. El contenido de estos documentos es responsabilidad del autor de la tesis o disertación.
  • Pesce, Celso P., et al. A Nonlinear Analytical Model for Flexible Pipe Crushing Analysis [doi:10.1115/omae2012-83701]. In ASME 2012 31st International Conference on Ocean, Offshore and Arctic Engineering, Rio de Janeiro. Volume 3: Pipeline and Riser Technology., 2012.
  • RABELO, Marcos A., PESCE, Celso P., and FUJARRA, André L.C.. An experimental investigation on the static structural behavior of helical bars. In Solid Mechanics in Brazil (Mecsol), Florianópolis, 2011. RJ : ABCM, 2011. vol. 1, p. 477-488.
  • RABELO, Marcos, Pesce, Celso P., and FUJARRA, André Luís Condino. An experimental investigation on the static structural behavior of helical bars. In Mecsol 2011, Florianópolis, 2011. Solid Mechanics in Brazil 2011.RJ : ABCM, 2011.
  • Pesce, Celso Pupo, et al. Structural Behavior of Umbilicals: Part II Model-Experimental Comparisons [doi:10.1115/omae2010-20895]. In ASME 2010 29th International Conference on Ocean, Offshore and Arctic Engineering, Shanghai. 29th International Conference on Ocean, Offshore and Arctic Engineering: Volume 5, Parts A and B., 2010.
Todos los derechos de la tesis/disertación pertenecen a los autores
CeTI-SC/STI
Biblioteca Digital de Tesis y Disertaciones de la USP. Copyright © 2001-2024. Todos los derechos reservados.