• JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
 
  Bookmark and Share
 
 
Thèse de Doctorat
DOI
https://doi.org/10.11606/T.3.2016.tde-30092016-100322
Document
Auteur
Nom complet
Eduardo Alberto Perez Ruiz
Unité de l'USP
Domain de Connaissance
Date de Soutenance
Editeur
São Paulo, 2016
Directeur
Jury
Souza, Roberto Martins de (Président)
Farias, María Cristina Moré
Fukumasu, Newton Kiyoshi
Silva Junior, Washington Martins da
Tentardini, Eduardo Kirinus
Titre en portugais
Comportamento mecânico de sistemas revestidos submetidos a esforços de contato normais e tangenciais.
Mots-clés en portugais
Comportamento mecânico
Desgaste dos materiais
Ensaio de riscamento
Filmes finos
Modos de falha
Simulação numérica
Sistemas revestidos
Resumé en portugais
A deposição de filmes finos resistentes ao desgaste é uma prática realizada com bastante frequência para melhorar o comportamento tribológico (atrito, desgaste, lubrificação) de diferentes peças e componentes. Afim de se garantir o adequado funcionamento do sistema revestido (substrato+filme), é importante avaliar o comportamento mecânico do mesmo. Um método para avaliação e estudo do comportamento mecânico destes sistemas é o ensaio de riscamento. O ensaio é utilizado para analisar a fratura superficial do revestimento (falha chamada coesiva), ou a resistência à adesão (falha chamada adesiva), e os modos de falha de revestimentos duros (HV>=5 GPa) e finos (<=30 ?m), depositados sobre substratos cerâmicos ou metálicos. A caracterização de alguns modos de falha nos sistemas revestidos está relacionada com modelos qualitativos de tensões presentes na região de contato e nas bordas do riscamento. Neste trabalho, foi estudado o comportamento das tensões Sxx e Szz desenvolvidas durante o riscamento de sistemas compostos por combinações de revestimentos/substratos. O trabalho foi baseado no desenvolvimento de modelos de simulação em 3D e 2D, utilizando o método dos elementos finitos (MEF), nos quais, uma partícula rígida com características de indentador Rockwell C, aplica carga progressiva até 2 N, ao longo de uma distância de 0,5 mm. No estudo, variou-se a dureza, traduzida em valores de tensão de escoamento do revestimento e do substrato, da mesma forma, analisou-se o efeito da tensão residual do revestimento, o efeito da espessura, o atrito, e a rugosidade, na superfície e na interface do sistema. O fato de obter valores de tensão que ultrapassam o valor do escoamento do revestimento pressupõe a possível ocorrência de falhas nos sistemas revestidos. Os resultados obtidos por simulação indicaram que as combinações de revestimento com tensão de escoamento baixa (Sy<3000 MPa) levam a experimentar tensões ao nível da tensão de escoamento do revestimento. Os revestimentos com tensão de escoamento Sy>5000 MPa apresentaram valores de tensão inferiores aos da tensão do revestimento, bem como o uso de tensão residual de -3 GPa no revestimento, assim como o aumento da espessura do revestimento têm grande importância nos sistemas revestidos, em particular nos casos em que a tensão de escoamento no revestimento é Sy>=5000MPa. O efeito do coeficiente de atrito leva à obtenção de valores de tensão (Sxx ou Szz) suficientemente altos na maioria das combinações, sendo esta a variável de estudo que levou ao maior número de vezes que foi atingido o valor da tensão de escoamento do revestimento. Da mesma forma, a rugosidade afeta os valores de tensão Sxx (interior do sulco). Ao aumentar a rugosidade do sistema aumenta a possibilidade de ultrapassar valores da tensão do revestimento na superfície e na interface do conjunto. Finalmente, pela complexidade do número de variáveis que afetam o ensaio, a simulação numérica sugere que o fato de analisar unicamente a dureza dos materiais, assim como as diferentes variáveis de forma isolada, não permite a reprodução de um mapa de falhas próximo ao proposto na literatura.
Titre en anglais
Mechanical behavior of coated systems under normal and tangential stresses.
Mots-clés en anglais
Coated systems
Failure modes
Mechanical behavior
Scratch test,Numerical simulation
Resumé en anglais
The deposition of wear resistant thin films is a common practice to improve the tribological behavior (friction, wear, lubrication) of several mechanical components. In order to guarantee the adequate performance of the coated systems, it is important to evaluate the mechanical behavior. A method for evaluation and study of the coated systems is the scratch test. The test is used to analyze the fracture of the coating (cohesive failure), or the adhesion of the coating (adhesive failure), and the failure modes of hard coatings (HV>=5 GPa) and thin (<=30 ?m) deposited on ceramic or metallic substrates. The characterization of some failure modes in coated systems is related to qualitative stress models at the contact region and the scratch edges. In this work, the behavior of the Sxx and Szz stresses developed during the scratch test was analyzed in different combinations of coatings/substrates. The work was based on the development of 3D and 2D simulation models using the finite element method (FEM). In the simulation, a rigid particle (with the geometry of Rockwell C indenter) applied progressive load to 2N along a 0.5 mm distance. In the study, the hardness was expressed as yield stress values in the coating and the substrate. In addition, it was examined the effect of coating residual stress (-3 GPa), as well as the effect of the thickness, the friction coefficient, and roughness of the surface and interface in the stresses behavior. The fact of obtaining tension values, which exceed the yield stress of coating implies the possible occurrence of failure. The results obtained by simulation indicated that the coating combinations with low yield stress (Sy < 3000 MPa) lead to Sxx and Szz stress values in the level of the coated yield stress. The coatings with yield stress Sy > 5000 MPa enable to obtain low Sxx and Szz values. The use of the residual stresses (-3 GPa) as well as increasing the thickness of the coating are very important factors in the coated systems, especially in the case of coatings with Sy > 5000 MPa. The effect of the friction coefficient leads to stress values (Sxx or Szz) sufficiently high in most of the combinations. This factor is the most important variable leading to the greater number of times that the value of the coating yield stress was reached. The roughness is responsible for Sxx stress values (inside groove). Increasing the roughness of the system increased the possibility of exceeding stress values in the surface and interface coating. Finally, by the complexity of the number of variables that affect the scratch test, the numerical simulation suggests that the fact of only analyzing the hardness of materials, as well as other isolated variables of the scratch test does not allow reproduction of a map of failures similar to that proposed in the literature.
 
AVERTISSEMENT - Regarde ce document est soumise à votre acceptation des conditions d'utilisation suivantes:
Ce document est uniquement à des fins privées pour la recherche et l'enseignement. Reproduction à des fins commerciales est interdite. Cette droits couvrent l'ensemble des données sur ce document ainsi que son contenu. Toute utilisation ou de copie de ce document, en totalité ou en partie, doit inclure le nom de l'auteur.
Date de Publication
2016-10-04
 
AVERTISSEMENT: Apprenez ce que sont des œvres dérivées cliquant ici.
Tous droits de la thèse/dissertation appartiennent aux auteurs
CeTI-SC/STI
Bibliothèque Numérique de Thèses et Mémoires de l'USP. Copyright © 2001-2024. Tous droits réservés.