• JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
 
  Bookmark and Share
 
 
Master's Dissertation
DOI
https://doi.org/10.11606/D.3.2011.tde-31102011-120001
Document
Author
Full name
Ladislao Roger Ticona Melo
E-mail
Institute/School/College
Knowledge Area
Date of Defense
Published
São Paulo, 2011
Supervisor
Committee
Bittencourt, Túlio Nogueira (President)
Manzoli, Osvaldo Luís
Silva, Valdir Pignatta e
Title in Portuguese
Monitoração de modelos físicos reduzidos para investigação do comportamento de estruturas em escala real.
Keywords in Portuguese
Mecânica da fratura
Microconcreto
Modelos físicos
Momento curvatura
Monitoração de estruturas
Sensores elétricos
Abstract in Portuguese
Esta pesquisa apresenta a monitoração de modelos reduzidos para a investigação do comportamento de estruturas. O estudo do comportamento estrutural consistiu basicamente na medição de grandezas físicas de forma experimental, para o qual os modelos físicos reduzidos foram submetidos a múltiplos ensaios em laboratório. Posteriormente, os dados experimentais foram tratados e analisados, para então serem comparados com os resultados dos modelos teóricos, avaliando assim, sua capacidade de simulação. No total foram monitorados três modelos reduzidos, cujas grandezas físicas foram medidas utilizando-se sensores elétricos, tais como: extensômetros, LVDTs e um servoatuador hidráulico, os quais estavam ligados ao sistema de aquisição da National Instrument, controlado por um computador de comando e pelos programas LabView e DynaTester. Um dos modelos construído em alumínio foi utilizado a fim de se estudar o comportamento da ponte do rio Suaçui, assim como calibrar os modelos teóricos em função dos dados experimentais da estrutura real e do modelo reduzido e estabelecer uma relação entre eles. Os outros dois modelos construídos em microconcreto foram utilizados para estudar o comportamento de estruturas na fase não linear e em fratura, para o qual foram submetidos a carregamentos incrementais. A ponte de microconcreto foi ensaiada com o intuito de se verificar a variação da rigidez de sua seção transversal e a construção de uma relação experimental de momento-curvatura. As vigas levemente armadas foram ensaiadas a flexão em três pontos até a ruptura, com a finalidade de se verificar que seu comportamento depende de vários parâmetros tais como: taxa de armadura, tamanho da viga, forma da seção transversal e a aderência aço-concreto. O estudo experimental foi complementado com ensaios de caracterização de materiais, estudos teóricos e o desenvolvimento de aplicativos como o programa PUENFLEX para o cálculo de relações de momento-curvatura de seções e o aplicativo desenvolvido em LabView para monitoração de estruturas que permite visualizar seu comportamento em tempo real.
Title in English
Monitoring reduced physical models to investigate the behavior of real structures.
Keywords in English
Electrical sensors
Fracture mechanics
Microconcrete
Moment- curvature
Monitoring of structures
Physical models
Abstract in English
This research presents the monitoring of scale reduced models for investigation the behavior of structures. The study of structural behavior consisted basically in the measurement of physical quantities on an experimental basis, to which the reduced physical models were subjected to multiple laboratory tests. Then the experimental data were processed and analyzed, so at the finally the results were compared with theoretical models and thereby to evaluate their ability to simulation. In total were monitored three reduced models, whose physical quantities were measured using electrical sensors such as strain gauges, LVDT's and a system hydraulics load, which in the same time were connected to the system of acquisition of the National Instrument, controlled by a computer command and DynaTester and LabView programs. One of the models constructed of aluminum was used to study the behavior of Suaçuí river bridge, as well as calibrate the theoretical models on the basis of experimental data of the real structure and the reduced model and to establish a relationship between them. The other two models built in microconcrete were used to study the behavior of structures in the nonlinear phase and fracture, for which they were subjected to incremental loads. The bridge of microconcrete was tested in order to verify the variations the rigidity of their cross section and the construction of an experimental relationship for the moment-curvature. The beams with minimum flexural reinforcement were tested in three-point bending to failure, in order to verify that his behavior depends on various parameters such as reinforcement ratio, the beam size, shape of cross section and steel-concrete adherence. The experimental study was completed with material characterization tests, theoretical studies and the development of applications such as PUENFLEX program for calculating the moment-curvature relationships for cross sections and the program developed in LabView for monitoring structures to visualize their behavior in real time.
 
WARNING - Viewing this document is conditioned on your acceptance of the following terms of use:
This document is only for private use for research and teaching activities. Reproduction for commercial use is forbidden. This rights cover the whole data about this document as well as its contents. Any uses or copies of this document in whole or in part must include the author's name.
Publishing Date
2011-11-21
 
WARNING: Learn what derived works are clicking here.
All rights of the thesis/dissertation are from the authors
CeTI-SC/STI
Digital Library of Theses and Dissertations of USP. Copyright © 2001-2024. All rights reserved.