• JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
 
  Bookmark and Share
 
 
Master's Dissertation
DOI
https://doi.org/10.11606/D.3.2017.tde-05092017-090653
Document
Author
Full name
Javier Andrés Osinaga Berois
E-mail
Institute/School/College
Knowledge Area
Date of Defense
Published
São Paulo, 2017
Supervisor
Committee
Noije, Wilhelmus Adrianus Maria Van (President)
Araújo, Hugo Puertas de
Soares Junior, Joao Navarro
Title in Portuguese
Interface de controle e monitoramento para circuitos alimentados em alta tensão variável.
Keywords in Portuguese
Alta tensão
Circuitos analógicos
Circuitos integrados VLSI
Abstract in Portuguese
Nesta dissertação, é apresentado o projeto de uma interface que permite o controle e monitoramento de cargas de alta tensão alimentadas na faixa de 8,5V a 35V. A interface fornece duas funções básicas: a primeira é permitir que circuitos alimentados no domínio dos 5V controlem o chaveamento de transistores de potência PMOS com uma tensão de porta 5V abaixo da tensão de alimentação; a segunda é realizar o monitoramento de sobrecorrentes na carga de alta tensão, alertando, com um sinal de baixa tensão, estas ocorrências. A interface foi projetada e fabricada no processo CMOS XC06 - 0,6µm da XFAB, com a inclusão de módulos que permitem o uso de transistores de alta tensão. Como parte da solução proposta, foi analisado, implementado e caracterizado um regulador de tensão flutuante que gera uma tensão de saída 5V abaixo da tensão de alimentação. A área de silício do regulador é de 599µm x 330µm, e as medidas da tensão de saída gerada apresentam variações menores que 10%. Também foi projetado e integrado no mesmo circuito integrado um sensor para medir o nível da tensão flutuante do regulador e comunicar seu estado com um sinal de 5V, este bloco ocupa uma área de 599µm x µm. Este sensor apresentou um desvio padrão de 7% nas medidas da sua tensão limiar. A interface foi integrada em um sensor de proximidade indutivo, permitindo o chaveamento de uma carga de 430pF a 1,2kHz em toda a faixa de alimentação.
Title in English
Control and monitoring interface for circuit with variable high voltage supply.
Keywords in English
CMOS
Driver
Floating regulator
High voltage
Interface
Abstract in English
This work presents the design of an interface that allow to control and monitoring high voltage loads in the range of 8,5V to 35V. The interface provides two main features, the first one is to allow low voltage circuits supplied with 5V to control the switching of power PMOS transistors with a gate voltage 5V bellow the supply voltage. The second one is monitoring overcurrents on the high voltage load alerting with a low voltage signal these occurences. The interface was designed and fabricated on the CMOS XC06 - 0,6µm process from XFAB with the inclusion of modules that allow the use of high voltage transistors. As part of the proposed solution it was analyzed, implemented and measured a floating voltage regulator wich provides an output voltage 5V bellow the supply voltage. The area of the regulator is 599µm x 330µm and the measures of the output voltage presents variations under the 10%. Also it was designed and integrates in the same integrated circuit a sensor to measure the output level of the floating regulator and communicate the state of this output with a 5V signal, this block occupies an area of 599µm x 579µm. This sensor presented a 7% standard desviation on the measured voltage threashold. The interface was integrated on an inductive proximity sensor allowing the switching of a 430pF load at 1,2kHz for the entire all supply range.
 
WARNING - Viewing this document is conditioned on your acceptance of the following terms of use:
This document is only for private use for research and teaching activities. Reproduction for commercial use is forbidden. This rights cover the whole data about this document as well as its contents. Any uses or copies of this document in whole or in part must include the author's name.
Publishing Date
2017-09-06
 
WARNING: Learn what derived works are clicking here.
All rights of the thesis/dissertation are from the authors
CeTI-SC/STI
Digital Library of Theses and Dissertations of USP. Copyright © 2001-2024. All rights reserved.