• JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
 
  Bookmark and Share
 
 
Master's Dissertation
DOI
https://doi.org/10.11606/D.3.2008.tde-02022009-163223
Document
Author
Full name
Helena Liberatori Gimaiel
E-mail
Institute/School/College
Knowledge Area
Date of Defense
Published
São Paulo, 2008
Supervisor
Committee
Dirani, Ely Antonio Tadeu (President)
Atvars, Teresa Dib Zambon
Seabra, Antonio Carlos
Title in Portuguese
Estudo das camadas transportadoras de elétrons em dispositivos poliméricos emissores de luz.
Keywords in Portuguese
Displays
Eletrônica molecular
ETL
Microeletrônica
Nanotecnologia
PLED
Abstract in Portuguese
Este trabalho tem como objetivo o estudo de camadas transportadoras de carga, em especial de elétrons, em dispositivos poliméricos emissores de luz (PLEDs). Estes dispositivos são obtidos basicamente através da deposição de uma camada emissiva polimérica entre dois eletrodos. Dispositivos poliméricos luminescentes apresentam vantagens quando comparados aos LEDs convencionais, entre elas a possibilidade de fabricação de mostradores ultrafinos, com baixo custo de fabricação e flexíveis. A eficiência dos PLEDs está intimamente ligada a viabilidade de comercialização destes displays. Neste trabalho, a primeira estrutura confeccionada é formada pela deposição de um filme do polímero emissivo OC1C10 PPV - poly[2-metoxi-5-(3,7-dimetiloctiloxi)- 1,4-fenilenovinileno entre o anodo ITO (Oxido de Índio-Estanho) e o catodo alumínio. Sobre o eletrodo transparente ITO o polímero OC1C10-PPV e o Al são depositados sob forma de filme através das técnicas Spin Coating e Evaporação Térmica, respectivamente. Em uma segunda etapa, foram fabricadas amostras com uma estrutura diferenciada, de modo que foram introduzidas camadas de filmes relacionadas aos fenômenos de transporte de cargas capazes de aumentar a eficiência do dispositivo. Estas camadas são responsáveis por uma redução da barreira de potencial existente entre o polímero emissivo e os eletrodos e podem também confinar um número maior lacunas no interior da camada emissiva. Este feito implica num aumento da população de elétrons e lacunas no interior da camada ativa, gerando uma maior recombinação de cargas. Neste sentido, filmes de Alq3 (tris-(8-hydroxyquinolate)-aluminum) com diferentes espessuras foram introduzidos entre a camada ativa e o catodo, gerando uma emissão luminosa superior. Por fim, diferentes concentrações de Alq3 foram adicionadas à solução de OC1C10-PPV, resultando em compostos OC1C10-PPV:Alq3 utilizados como camada ativa, o que proporcionou um aumento da eficiência luminosa em mais de 10 vezes quando comparado aos dispositivos fabricados na primeira etapa do trabalho. A utilização do polímero PEDOT:PSS - Poli (3,4-etilenodioxitiofeno) : Poliestireno Sulfonado- como camada transportadora de lacunas (HTLs) depositada entre o alumínio e o polímero eletroluminescente se mostrou indispensável para o funcionamento dos dispositivos fabricados, evitando o curto circuito entre eletrodos.
Title in English
Electron transport layer study in polymeric light emission devices.
Keywords in English
Alq3
ETLs
OC1C10-PPV
PLEDs
Abstract in English
This work has the objective to study charge carried layers, especially of electrons, in polymer light emitting devices (PLEDs). These devices are obtained basically by polymer emissive layer deposition between two electrodes. Polymer luminescent devices show advantages when compared to conventional LEDs, such as the thin displays manufacture possibility, with low cost of manufacture and flexible. The PLEDs efficiency is closely linked the commercialization feasibility these displays. In this work, the first structure fabricated is composed by the deposition of OC1C10 PPV - [poly(2-(3,7-dimethyloctyloxy)-5-(2'-methoxy-1,4-phenylene vinylene)] emissive polymer film between the anode ITO (Indium Tin Oxide) and the aluminum cathode. On the transparent electrode ITO the polymer OC1C10-PPV and Al are deposited as a film through spin coating and thermic evaporation techniques, respectively. In other step, samples were fabricated with a differentiated structure, which films layers related to charges transport were introduced and increase efficiency device. These layers are responsible for reduction of potential barrier between polymer emissive and the electrodes and they can confine a higher number of holes in the emissive layer. This imply in an increase of electrons and hole population in active layer, producing a higher luminous emission. Finally, different Alq3 concentrations were added to solution of the OC1C10-PPV, resulting in compost OC1C10-PPV:Alq3 used as active layer, that increase the luminous efficiency more 10 times than the devices fabricated in first stage of this work. The use polymer PEDOT:PSS Poly(3,4-ethylenedioxythiophene): Poly(StyreneSulfonate) as hole transport layer (HTLs) deposited between the aluminum and the polymer electroluminescent showed essential to operation of devices produced, avoiding the short circuit between electrodes.
 
WARNING - Viewing this document is conditioned on your acceptance of the following terms of use:
This document is only for private use for research and teaching activities. Reproduction for commercial use is forbidden. This rights cover the whole data about this document as well as its contents. Any uses or copies of this document in whole or in part must include the author's name.
helena_gimaiel.pdf (3.18 Mbytes)
Publishing Date
2009-02-06
 
WARNING: Learn what derived works are clicking here.
All rights of the thesis/dissertation are from the authors
CeTI-SC/STI
Digital Library of Theses and Dissertations of USP. Copyright © 2001-2024. All rights reserved.