• JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
 
  Bookmark and Share
 
 
Master's Dissertation
DOI
https://doi.org/10.11606/D.3.2004.tde-03052004-231551
Document
Author
Full name
Cassio de Carvalho Berni
E-mail
Institute/School/College
Knowledge Area
Date of Defense
Published
São Paulo, 2004
Supervisor
Committee
Garcia, Claudio (President)
Leonardi, Fabrizio
Marques, Ricardo Paulino
Title in Portuguese
Implementação em hardware/firmware de um sensor virtual utilizando algoritmo de identificação nebulosa.
Keywords in Portuguese
autônomo
hardware
nebuloso
sensor
Abstract in Portuguese
Este trabalho apresenta um projeto e implementação de um sensor virtual (soft sensor) "embedded", ou seja, um módulo de hardware genérico e autônomo, o qual pode ser utilizado em diversos processos complexos, nos quais uma determinada variável de interesse não possa ser diretamente medida por sensores convencionais. O hardware é baseado em um processador digital de sinais da família TMS320, com a adição de circuitos de instrumentação, como interface de entrada e saída em padrões industriais (0..10V, 4..20mA), conversores A/D e D/A, entre outros. A implementação do sensor virtual em hardware foi constituída basicamente de três etapas. A primeira consistiu no treinamento do modelo, realizado off-line, utilizando um microcomputador PC e o software Matlab. Neste trabalho, o modelo nebuloso obtido possui uma estrutura do tipo Takagi-Sugeno e os antecedentes são definidos com base no algoritmo de clusterização FCM. Em uma segunda etapa, o modelo de sensor obtido foi validado no PC, comparando-se sua saída com a do sensor "real". Finalmente, a terceira etapa consistiu em traduzir e implementar o modelo no formato do processador digital de sinais. O firmware contém então o modelo obtido e opera on-line, estimando a variável desejada a partir de outra(s) variável(eis) disponível(eis). Os testes foram realizados empregando-se uma planta simulada de neutralização de pH.
Title in English
Hardware/firmware implementation of a soft sensor using a fuzzy identification algorithm.
Keywords in English
autonomous
fuzzy
hardware
sensor
Abstract in English
This work presents a design and implementation of an embedded soft sensor, i. e., a generic and autonomous hardware module, which can be used in many complex plants, wherein a certain variable can not be measured directly by convencional sensors. The hardware is based on a digital signal processor of TMS320 family, with the addition of instrumentation circuits, like industrial standard i/o interface (0..10V, 4..20mA), A/D and D/A converters, among other ones. The implementation of the embedded soft sensor basically consisted of three steps. The first one was the model training, done off-line, using a PC microcomputer and Matlab software. In this work, the obtained fuzzy model has a Takagi-Sugeno structure and the antecedents are defined based on the FCM clustering algorithm. In a second step, the obtained sensor model was validated in PC environment, comparing its output with the "real" sensor output. Finally, the third step consisted of translating and implementing the model to the digital signal processor format. The firmware so contains the obtained model and runs on-line, estimating the target variable from other available ones. The tests have been performed using a simulated pH neutralization plant.
 
WARNING - Viewing this document is conditioned on your acceptance of the following terms of use:
This document is only for private use for research and teaching activities. Reproduction for commercial use is forbidden. This rights cover the whole data about this document as well as its contents. Any uses or copies of this document in whole or in part must include the author's name.
Publishing Date
2004-06-09
 
WARNING: Learn what derived works are clicking here.
All rights of the thesis/dissertation are from the authors
CeTI-SC/STI
Digital Library of Theses and Dissertations of USP. Copyright © 2001-2024. All rights reserved.