• JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
 
  Bookmark and Share
 
 
Master's Dissertation
DOI
https://doi.org/10.11606/D.3.2017.tde-29032017-153945
Document
Author
Full name
Solange Kazue Utimura
E-mail
Institute/School/College
Knowledge Area
Date of Defense
Published
São Paulo, 2014
Supervisor
Committee
Espinosa, Denise Crocce Romano (President)
Paola, Jean Carlo Camasmie de
Tenório, Jorge Alberto Soares
Title in Portuguese
Reciclagem de resíduos de equipamentos eletroeletrônicos: separação de ABS e HIPS por flotação.
Keywords in Portuguese
Flotação
Sucata eletrônica (Reciclagem)
Abstract in Portuguese
Os resíduos eletroeletrônicos vêm aumentando no mundo e contribuem com a escassez de recursos naturais e com a ocupação de espaços em aterros que estão esgotando sua capacidade de disposição de resíduos. Uma alternativa é a reciclagem dos resíduos eletroeletrônicos e para viabilizar o processo, é importante conhecer a composição dos materiais para direcionar tecnologias e conseguir sua recuperação. Esses resíduos possuem uma diversidade de plásticos que, ao serem reciclados, garantem o seu reaproveitamento como fonte de matéria prima para a produção de materiais poliméricos. O ABS (copolímero: Acrilonitrila Butadieno Estireno) e o HIPS (Poliestireno de Alto Impacto) são dois tipos de polímeros muito utilizados nas indústrias de eletroeletrônicos. O objetivo deste trabalho é estudar a separação do ABS e do HIPS para a reciclagem, utilizando as Técnicas de Tratamento de Minérios como a separação por flotação. Para a separação dos polímeros, os resíduos eletroeletrônicos foram desmantelados manualmente e os componentes plásticos foram separados por tipo e cor. Os plásticos separados, foram cominuídos no moinho de facas e classificados por meio do ensaio granulométrico. Os ensaios de flotação foram conduzidos em uma coluna de vidro, utilizando se de soluções de álcool etílico e de ácido acético em diferentes concentrações. As soluções atuaram como agentes hidrofilizantes de superfície, permitindo a separação desses polímeros. Na flotação com o etanol, os experimentos mostraram os melhores resultados na concentração de 20% em massa, com a pureza de HIPS de 96% e do ABS de 98%. Na flotação com o ácido acético, os ensaios mostraram os melhores resultados na concentração de 40% em massa, com a pureza do ABS de 96% e de HIPS de 86%.A flotação com 20% de concentração de etanol apresentou melhor eficácia na recuperação e na pureza do HIPS e do ABS em relação à flotação com 40% de ácido acético.
Title in English
Separation of ABS and HIPS from waste electrical and electronic equipment (WEEE) by froth flotation.
Keywords in English
ABS
Flotation
HIPS
Recycling
WEEE
Abstract in English
The speed in which new technologies are being developed stimulates the rapid obsolescence of electronic equipment. Hence electronic waste grows at high rates all over the world and has become an environmental issue due to its accumulation in landfills. In order to reduce these environmental impacts, a feasible solution is recycling. Recycled allows its reuse as a source of raw material for the production of polymeric materials as well as for energy generation. ABS (copolymer: Acrylonitrile Butadiene Styrene) and HIPS (High Impact Polystyrene) are the most common polymers used in the electro electronic industry. The aim of this work is to study the separation of ABS and HIPS using the froth flotation technique. Froth flotation is a process of separating the solid particles through differences in their surface characteristics. The reason for using this technique is that gravimetric methods are unlikely to produce good results due to the similar specific weights of both materials. Froth flotation also is difficult as both plastics are water repellent (hydrophobic). The samples were manually dismantled, with plastic components separated by type and color. After that, comminution was performed in a knife mill and grain sizes separated in screen. The flotation tests were conducted in a glass column, using ethyl alcohol and acetic acid solutions with different concentrations. These solutions were used to increase the hydrophilic characteristics in the surface of ABS, and to make possible the separation of these polymers. When floating with ethanol, the experiments showed the best results at a concentration of 20% in weight, with purity levels of 96% of HIPS and 98% of ABS. When floating with acetic acid, the tests showed the best results at the concentration of 40% in weight, with purity levels of 96% of ABS and 86% of HIPS.The flotation with 20% in weight of ethanol concentration showed better results in recovery and purity of HIPS and ABS in comparison to the 40% acetic acid.
 
WARNING - Viewing this document is conditioned on your acceptance of the following terms of use:
This document is only for private use for research and teaching activities. Reproduction for commercial use is forbidden. This rights cover the whole data about this document as well as its contents. Any uses or copies of this document in whole or in part must include the author's name.
Publishing Date
2017-03-29
 
WARNING: Learn what derived works are clicking here.
All rights of the thesis/dissertation are from the authors
CeTI-SC/STI
Digital Library of Theses and Dissertations of USP. Copyright © 2001-2024. All rights reserved.