• JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
 
  Bookmark and Share
 
 
Thèse de Doctorat
DOI
https://doi.org/10.11606/T.3.2011.tde-20072011-092100
Document
Auteur
Nom complet
Paula Fernanda da Silva Farina
Adresse Mail
Unité de l'USP
Domain de Connaissance
Date de Soutenance
Editeur
São Paulo, 2011
Directeur
Jury
Goldenstein, Hélio (Président)
Avillez, Roberto Ribeiro de
Falleiros, Ivan Gilberto Sandoval
Pinedo, Carlos Eduardo
Tschiptschin, André Paulo
Titre en portugais
Efeito das adições de tratamentos criogênicos e de alívio de tensões no ciclo térmico do aço ferramenta AISI D2.
Mots-clés en portugais
Aço ferramenta
Alívio de tensões
Envelhecimento da martensita
Partição de carbono
Revenimento
Tratamento criogênico
Resumé en portugais
Foram estudados os efeitos da introdução de etapas de tratamento criogênico e do alívio de tensões no ciclo térmico do aço ferramenta para trabalho a frio AISI D2. Variaram-se as temperaturas de tratamento criogênico, sendo elas principalmente: criogênica (-196°C) e subzero (-80°C). Foram variados os tempos de permanência às temperaturas criogênicas: 2, 3, 10, 24 e 30 e 36 horas. Verificou-se o efeito da adição da etapa (130°C/90 minutos) de alívio de tensões previamente ao tratamento criogênico. As amostras com diferentes ciclos térmicos foram submetidas à caracterização metalográfica, difração de raios-X e ensaios de potencial termo-elétrico. Na caracterização metalográfica as amostras foram analisadas por MEV (microscopia eletrônica de varredura) e MEV-FEG (MEV com canhão com emissão por efeito de campo). Os carbonetos secundários (micrométricos) não apresentaram variação. Os carbonetos secundários de revenido (nanométricos) apresentaram-se mais finamente dispersos na matriz nas amostras com tratamento criogênico e sem alívio de tensões. A difração de Raios-X foi realizada no Laboratório Nacional de Luz Síncroton, a luz síncroton foi essencial para detectar as variações pequenas e em escala nanométrica que ocorreram devido às inserções dos tratamentos criogênicos e de alívio de tensões. Foram verificados: i) menor fração volumétrica de austenita retida nas amostras tratadas em temperatura subzero quando comparadas às amostras tratadas em temperaturas criogênicas, indicando um comportamento cinético em C da curva de transformação; ii) diminuição da relação c/a dos parâmetros do reticulado cristalino da martensita e aumento do parâmetro a da austenita (devido à partição de carbono da martensita supersaturada em carbono para a austenita) causando estabilização da austenita com a inserção da etapa de alívio de tensões; iii) aumento no parâmetro a da austenita retida residual após revenimentos, com consequente aumento no teor de carbono da mesma, devido à partição de carbono; iv) maior fração volumétrica de carbonetos de revenido (M7C3 e M2C) nas amostras com tratamento criogênico logo após a têmpera, seguido da amostra com tratamento criogênico + alívio de tensões, seguidos da amostra somente temperada e revenida e por fim da amostra com alívio de tensões e sem tratamento criogênico. Os ensaios de potencial termo-elétrico (realizados no INSA-Lyon) foram utilizados para verificar o comportamento das amostras nas temperaturas de revenimento. Foram realizados tratamentos isotérmicos (130°C, 210°C, 350°C, 450°C e 520°C) cumulativos com tempos de 1 minuto até 130 horas. Verificou-se que: i) nos primeiros estágios do revenimento a cinética é favorecida pelo tratamento criogênico (precipitação de carbonetos 'eta' ou 'epsilon'); ii) o alívio de tensões atrasa os dois primeiros estágios do revenimento; iii) há maior crescimento dos carbonetos de liga nas amostras sem tratamento criogênico. O refinamento dos carbonetos secundários de revenimento foi atribuído a uma sequência de precipitações de carbonetos de revenido in situ: 'eta' -> 'teta' -> M7C3 e M2C.
Titre en anglais
The effect of cryogenic and stress relief treatments additions in the thermal cycle of the AISI D2 tool steel.
Mots-clés en anglais
Carbon partition
Cryogenic treatment
Martensite aging
Stress relief
Temper
Tool steel
Resumé en anglais
The effects of cryogenic treatments and of stress relief treatment introduced in the thermal cycle of the cold work tool steel AISI D2 were studied. The cryogenic temperatures were varied: cryogenic (-196°C) and subzero (-80°C). It was also varied the holding times at cryogenic temperatures: 2, 3, 10, 24, 30 and 36 hours. The effect of including a stress relief heat treatment previously to the cryogenic treatment was also verified. Samples submitted to different thermal cycles were studied using metallographic characterization, X-ray diffraction and electric power measurements. The metallographic characterization used SEM (scanning electron microscopy) and SEM-FEG (SEM with field emission gun), besides OM (optical microscopy). It was not found any variation in the secondary carbides (micrometrics) precipitation. The temper secondary carbides (nanometrics) showed to be more finely dispersed in the matrix of the samples with cryogenic treatment and without stress relief. The X-ray diffractions were carried out at the Brazilian Synchrotron Light Laboratory; synchrotron light was essential to detect small and nano sized variations occurring due to the addition of the cryogenics and stress relief treatments. It was verified: i) lower austenite volumetric fraction in the samples with subzero treatment if compared to the cryogenic treated samples, an indication of a C curve kinetic behavior of the transformation; ii) the stress relief treatment produced an decrease in the c/a relationship of the martensite lattice parameters and an increase in the austenite a parameter (explained by carbon atoms partition from the supersatured martensite to the retained austenite); iii) after double tempering occurred an increase in the a parameter of the remaining austenite lattice, indicating an increase in the carbon content of the residual retained austenite, due to carbon partition; iv) higher volumetric fraction of temper carbides (M7C3 and M2C) if the samples were cryogenic treated just after quench (to room temperature), followed by the sample with cryogenic treatment + stress relief, after the sample just quenched and tempered and finally by the samples with stress relief without cryogenic treatment. Thermo-electric power measurements (carried out at INSA-Lyon) characterized the samples behavior after tempering at different temperatures. Cumulative isothermal treatments (130°C, 210°C, 350°C, 450°C e 520°C) with increasing times (from 1 minute to 130 hours) were used. It was verified that: i) the kinetic is favoured by the cryogenic treatment in the first temper stage ('eta' or 'epsilon' carbide precipitation); ii) the stress relief delayed the first and second temper stage; iii) the samples without cryogenic treatment showed to have a bigger growing for the alloys carbides in the last stage of temper. The refinement of the temper secondary carbides was attributed to an in situ carbide precipitation during tempering: 'eta' -> 'teta' -> M7C3 e M2C.
 
AVERTISSEMENT - Regarde ce document est soumise à votre acceptation des conditions d'utilisation suivantes:
Ce document est uniquement à des fins privées pour la recherche et l'enseignement. Reproduction à des fins commerciales est interdite. Cette droits couvrent l'ensemble des données sur ce document ainsi que son contenu. Toute utilisation ou de copie de ce document, en totalité ou en partie, doit inclure le nom de l'auteur.
Date de Publication
2011-08-02
 
AVERTISSEMENT: Apprenez ce que sont des œvres dérivées cliquant ici.
Tous droits de la thèse/dissertation appartiennent aux auteurs
CeTI-SC/STI
Bibliothèque Numérique de Thèses et Mémoires de l'USP. Copyright © 2001-2024. Tous droits réservés.