• JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
 
  Bookmark and Share
 
 
Doctoral Thesis
DOI
https://doi.org/10.11606/T.3.2016.tde-12072016-084348
Document
Author
Full name
Joice Miagava
Institute/School/College
Knowledge Area
Date of Defense
Published
São Paulo, 2015
Supervisor
Committee
Gouvea, Douglas (President)
Castro, Ricardo Hauch Ribeiro de
Florio, Daniel Zanetti de
Pereira, Gilberto José
Santilli, Celso Valentim
Title in Portuguese
Modificação da energia de superfície em nano-óxidos do sistema SnO2-TiO2 preparados por síntese química.
Keywords in Portuguese
Energia de superfície
Materiais cerâmicos
Nanomateriais
Nanopartículas
SnO2
Termodinâmica
TiO2
Abstract in Portuguese
Devido à elevada razão superfície/volume dos nanomateriais, estes apresentam propriedades únicas que são consequência das propriedades de suas superfícies. Para estabilizar as nanopartículas, as quais tendem ao crescimento para reduzir o excesso de energia, uma estratégia é a introdução de aditivos que segreguem na superfície e reduzam a energia de superfície. Neste trabalho, o sistema de importância tecnológica SnO2-TiO2 foi estudado. Nanopartículas de Sn1-xTixO2 (0,00 x 1,00) foram sintetizadas pelo método dos precursores poliméricos. Difratogramas de raios X mostram que uma solução sólida com estrutura do tipo rutilo é obtida para x 0,90. A evolução dos parâmetros de rede, os espectros obtidos por perda de energia de elétrons (EELS) e os espectros no infravermelho coletados no modo de refletância difusa (DRIFT) sugerem a segregação do Ti4+ na superfície, que justifica a elevada solubilidade do Ti4+ no SnO2. Os espectros Raman são coerentes com a segregação, mostrando que, mesmo sem a formação de segunda fase, ocorrem regiões ricas em Ti. A segregação está relacionada também à redução do tamanho de cristalito e ao aumento da área de superfície específica devido à redução da energia de superfície (de 1,40 Jm-2 em x = 0,00 até 1,08 Jm-2 em x = 0,50) determinada por calorimetria de adsorção de água e coerente com os dados da calorimetria de dissolução. Para x 0,90, ocorre a formação da fase anatásio além do rutilo e os fenômenos de estabilização dos polimorfos podem ser explicados pela modificação da energia de superfície. Com base na caracterização feita, as atividades fotocatalíticas das nanopartículas foram avaliadas e foi verificado um aumento da eficiência devido à superior área de superfície das amostras aditivadas em relação às amostras puras.
Title in English
Surface energy modification of nano-oxides of the SnO₂-TiO₂ system prepared by chemical synthesis.
Keywords in English
Ceramic materials
Nanomaterials
SnO₂
Surface energy
Thermodynamics
TiO₂
Abstract in English
Due to the high surface/volume ratio, nanomaterials have unique properties as a consequence of their surface properties. In order to stabilize the nanoparticles, which tend to grow to reduce their excess energy, one can introduce additives that are prone to segregate at the surfaces and reduce the surface energy. In this work, the technologically relevant SnO2-TiO2 system was studied. Sn1-xTixO2 (0.00 x 1.00) nanoparticles were synthesized by polymeric precursors method. X-ray diffraction patterns show that a rutile-structured solid solution is formed for x 0.90. Lattice parameters evolution, electron energy loss spectra (EELS) and diffuse reflectance infrared spectra (DRIFT) suggest a Ti4+ surface segregation, which explains the high Ti4+ solubility in SnO2. Raman spectra are in accord with the segregation, showing Ti-rich sites in the absence of a second crystalline phase. The segregation is also related to a decrease in the crystallite size and an increase in the surface area due to a decrease in the surface energy (from 1.40 Jm-2 for x = 0.00 to 1.08 Jm-2 for x = 0.50) determined by water adsorption calorimetry and consistent with drop solution calorimetry data. For x 0.90, the formation of anatase occurs in addition to rutile, and the polymorphic stability can be explained according to the surface energy modification. Based on these results, photocatalytic activity of the samples were evaluated, and an increase in the efficiency due to a higher surface area was observed for the samples containing additive compared to pure samples.
 
WARNING - Viewing this document is conditioned on your acceptance of the following terms of use:
This document is only for private use for research and teaching activities. Reproduction for commercial use is forbidden. This rights cover the whole data about this document as well as its contents. Any uses or copies of this document in whole or in part must include the author's name.
JoiceMiagava2015.pdf (3.07 Mbytes)
Publishing Date
2016-08-12
 
WARNING: Learn what derived works are clicking here.
All rights of the thesis/dissertation are from the authors
CeTI-SC/STI
Digital Library of Theses and Dissertations of USP. Copyright © 2001-2024. All rights reserved.