• JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
 
  Bookmark and Share
 
 
Master's Dissertation
DOI
https://doi.org/10.11606/D.3.2011.tde-11082011-131925
Document
Author
Full name
Ivani Caetano dos Passos Pizzitola
E-mail
Institute/School/College
Knowledge Area
Date of Defense
Published
São Paulo, 2011
Supervisor
Committee
Wiebeck, Hélio (President)
Silva, Leonardo Gondim de Andrade e
Valera, Ticiane Sanches
Title in Portuguese
Efeito da incorporação de fibras curtas de sílica amorfa em compósitos de polipropileno utilizados pela indústria automotiva nacional.
Keywords in Portuguese
Agente compatibilizante
Compósitos de polipropileno
Fibras de sílica
POE
Abstract in Portuguese
A adição de fibras de sílica em compósitos de polipropileno (PP) foi investigada neste trabalho como uma proposta de desenvolvimento de novos materiais utilizados pela indústria automotiva, os quais permitam a redução de peso do veículo e a consequente economia de combustível. As fibras são leves, constituídas de sílica amorfa e tratadas com aminossilano para uma melhor interação com a matriz polimérica. Compósitos de PP homopolímero, bem como de compósitos de PP heterofásico modificados com o copolímero etileno e 1-octeno (POE), foram formulados utilizando-se 20% de fibras de sílica e com PP funcionalizado com anidrido maleico (PP-g-MAH) como compatibilizante. As amostras foram avaliadas quanto às propriedades mecânicas, térmicas, características morfológicas, anisotropia e quanto a requisitos específicos, como emissões de voláteis, odor e resistência a riscos. O compósito de PP homopolímero na presença de 2% de PP-g- MAH apresentou o melhor balanço de propriedades, porém com comprometimento quanto à tenacidade. A análise morfológica desta formulação indicou a presença de fibras descoladas, demonstrando que o tratamento das fibras com o aminossilano, não foi totalmente efetivo para a redução das tensões interfaciais. Os compósitos de PP heterofásico modificados com POE (5% em peso) e com fibras de sílica apresentaram boa dispersão, forma e tamanho de domínios elastoméricos, os quais promoveram um bom efeito de tenacificação. O copolímero POE atuou como um agente compatibilizante, melhorando a adesão fibra-polímero. Por outro lado, estes compósitos apresentaram um grande número de partículas de borracha descoladas da matriz por cavitação, sugerindo que a adesão entre as fases pode ser melhorada, apesar da afinidade química da blenda PP/POE. De uma forma geral, as fibras curtas de sílica constituem uma alternativa potencial para o reforço de compósitos de PP. Além de menor densidade, os compósitos estudados apresentaram bons resultados quando comparados a formulações com o emprego de talco, o qual é muito empregado em peças automotivas.
Title in English
Effect of the incorporation of short amorphous silica fibers in polypropylene composites used by the national automotive industry.
Keywords in English
Compatibilizer agent
POE
Polypropylene composites
Silica fibers
Abstract in English
The addition of silica fibers in polypropylene (PP) composites was investigated on this work as a proposal to develop new materials used in automotive industry, in order to enable the reduction of vehicle weight and the resulting fuel economy. The fibers are lightweight, made of amorphous silica and treated with amine silane for better interaction with the polymer matrix. Composites of PP homopolymer and PP heterophasic composites modified with ethylene and 1-octene (POE) were formulated using 20% of silica fibers as reinforcement and PP functionalized with maleic anhydride (PP-g-MAH) as compatibilizer agent. The samples were evaluated for mechanical, thermal, morphological, anisotropy, as well as specific requirements such as emissions of volatiles, odor and scratch resistant. The composite of PP homopolymer in the presence of 2% of PP-g-MAH showed the best balance of properties, however the tenacity was impaired. The morphological analysis of this formulation indicated the presence of detached fibers, demonstrating that treatment of fibers with the amine silane was not totally effective in reducing the interfacial tensions. Heterophasic PP composites modified with POE (5 wt%) and silica fibers presented good dispersion, shape and size of elastomeric domains, promoting a good toughening effect. The POE copolymer acted as a coupling agent, enhancing the adhesion fiber-polymer. On the other hand, these composites showed a large number of rubber particles detached from the matrix by cavitation, suggesting that the adhesion between the phases can be improved, despite the chemical affinity of the blend PP/POE. In general, short silica fibers are a potential alternative for polypropylene composites reinforcement. In addition to lower density, the studied composites demonstrated good results when compared to formulations with the use of talc, which is very used in automotive parts.
 
WARNING - Viewing this document is conditioned on your acceptance of the following terms of use:
This document is only for private use for research and teaching activities. Reproduction for commercial use is forbidden. This rights cover the whole data about this document as well as its contents. Any uses or copies of this document in whole or in part must include the author's name.
Publishing Date
2011-09-09
 
WARNING: Learn what derived works are clicking here.
All rights of the thesis/dissertation are from the authors
CeTI-SC/STI
Digital Library of Theses and Dissertations of USP. Copyright © 2001-2024. All rights reserved.