• JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
 
  Bookmark and Share
 
 
Master's Dissertation
DOI
https://doi.org/10.11606/D.3.2007.tde-09012008-122306
Document
Author
Full name
Cecília Korber Gonçalves
E-mail
Institute/School/College
Knowledge Area
Date of Defense
Published
São Paulo, 2007
Supervisor
Committee
Tenório, Jorge Alberto Soares (President)
Capocchi, José Deodoro Trani
Couto, Antonio Augusto
Title in Portuguese
Pirólise e combustão de resíduos plásticos.
Keywords in Portuguese
Combustão
Pirólise
Plásticos (reciclagem)
Abstract in Portuguese
Dois milhões de toneladas por ano de resíduos plásticos são gerados no Brasil. Apenas 16,5% em massa deste resíduo plástico são mecanicamente reciclados, a maior parte restante é levada a aterros ou lixões. Todo este material poderia ser incinerado e, desta forma reduzir em até 90% a massa do volume aterrado, e seu conteúdo energético seria usado para gerar vapor ou energia. Esta investigação foi feita sobre os produtos de combustão incompleta emitidos da pirólise e combustão em estado estacionário do polietileno e poliestireno em um forno vertical de dois estágios, eletricamente aquecido. Separadamente, os polímeros na forma pulverizada foram pirolisados em temperatura constante de 1000°C e, depois da mistura com N2/O2, os produtos de pirólise foram queimados a 900, 1000 e 1100°C. Os testes foram conduzidos com 21% de O2 em volume no forno de oxidação. Diferentes razões de combustível e ar foram usadas no forno de combustão, pela variação da taxa de alimentação de polímero no forno de pirólise. A motivação para a combustão indireta de PE e PS foi obter a combustão nominalmente pré-misturada dos gases de pirólise com ar, assim, obtendo menores emissões dos produtos de combustão incompleta comparativamente à combustão direta do polímero sólido. Este trabalho examinou os efeitos da temperatura de combustão e a razão equivalente de ar e combustível. Os efluentes da pirólise e combustão foram analisados, e as emissões de CO, CO2, O2, hidrocarbonetos leves, hidrocarbonetos policíclicos aromáticos e materiais particulados foram mensurados. Ainda, o material particulado foi caracterizado quanto ao tamanho das partículas. Foi observado que enquanto a quantidade de gás de pirólise diminuiu com o aumento da taxa de alimentação do polímero, sua composição permaneceu praticamente independente da taxa de alimentação. As emissões de CO2 foram máximas perto da razão equivalente 1, enquanto as emissões de CO aumentaram com o aumento da razão equivalente. As emissões totais de hidrocarbonetos leves e PAH na combustão aumentaram tanto com o aumento da razão equivalente, quanto do aumento da temperatura. A maior parte do material particulado teve o tamanho menor que um micrometro. No geral, as emissões de PAH e material particulado da combustão indireta de PE e PS foram uma ordem de grandeza menor que a emissão correspondente da combustão direta e heterogênea do polímero sólido, obtida em outros trabalhos. Como a pirólise destes polímeros requer uma entrada nominal de calor mínima em relação à quantidade de calor gerada na sua combustão, a implantação desta técnica pode ser vantajosa.
Title in English
Pyrolysis and combustion of plastic wastes.
Keywords in English
Combustion
PAH
Particulate matter
Plastic
Pyrolysis
Wastes
Abstract in English
Two millions tons/year of plastic wastes are generated in Brazil. Only 16.5% of this plastic waste is mechanically recycled, the rest is mostly landfilled. All these material could be incinerated, in a way to reduce by 90% the volume of landfilled waste, and use its energy content to supply energy. This investigation was conducted on pollutants emitted from steady-flow pyrolysis and combustion of polyethylene and polystyrene in a two-stage electrically-heated vertical furnace. Separately, the polymers, in pulverized form, were first pyrolyzed at constant temperature of 1000°C and subsequently their pyrolyzates were burned at 900, 1000 and 1100°C, upon mixing with air. Tests were conducted with 21% of O2 and different fuel to air equivalence ratios in the oxidizer furnace, by keeping the flow of gases and changing the feed rate of polymer in the pyrolyzer furnace. The motivation for this indirect combustion of PE and PS was to attain nominally-premixed combustion of the pyrolyzate gases with air, thereby achieving lower pollutant emissions than those from direct combustion of the solid polymer. This work examined the effects of the combustion temperature, as well as of the polymer feed rate and the resulting fuel to air equivalence ratio. The effluents of pyrolysis and combustion were analyzed for fixed gases (CO, CO2, O2), light hydrocarbons, polycyclic aromatic hydrocarbons and particulate matter. It was found that whereas the amount of pyrolysis gas decreased with increasing polymer feed rate, its composition was nearly independent of the feed rate. CO2 emissions peaked at an equivalence ratio near unity, while the CO emissions increased with increasing equivalence ratio. The total light hydrocarbon and PAH emissions of combustion increased both with increasing equivalence ratio and with temperature. The generated particulates were mostly submicronmeter in size. Overall, PAH and soot emissions from indirect burning of PE and PS were an order of magnitude lower than corresponding emissions from direct heterogeneous burning of the solid polymer, obtained elsewhere. As pyrolysis of these polymers requires a nominal heat input that amounts to a diminutive fraction of the heat released during its combustion, implementation of this technique is deemed advantageous.
 
WARNING - Viewing this document is conditioned on your acceptance of the following terms of use:
This document is only for private use for research and teaching activities. Reproduction for commercial use is forbidden. This rights cover the whole data about this document as well as its contents. Any uses or copies of this document in whole or in part must include the author's name.
Publishing Date
2008-02-22
 
WARNING: The material described below relates to works resulting from this thesis or dissertation. The contents of these works are the author's responsibility.
  • Gonçalves, Cecilia Korber, et al. Emissions form Premixed Combustion of Gasified Polyetylene. Energy & Fuels , 2008, vol. 22, p. 372-381.
  • Gonçalves, Cecilia Korber, et al. Emissions form Premixed Combustion of Polysttyrene. Energy & Fuels , 2008, vol. 22, p. 354-362.
  • GONCALVES, C. K., et al. Emissões voláteis da combustão indireta de resíduos plásticos municipais. In 62 Congresso Anual da ABM, Vitória, 2007. 62 Congresso Anual da ABM.Sâo Paulo : ABM, 2007.
  • GONCALVES, C. K., et al. Estudo das emissões de material particulado da combustão indireta de resíduo e polietileno. In 62 Congresso Anual da ABM, Vitória, 2007. 62 Congresso Anual da ABM.Sâo Paulo : ABM, 2007.
  • GONCALVES, C. K., Tenório, Jorge Alberto Soares, and LEVENDIS, Y. A. EMISSION YIELDS FROM PYROLYSIS FOLLOWED BY COMBUSTION OF POLYETHYLENE IN STEADY FLOW. In 136th TMS Annual Meeting, Orlando, 2007. Extraction, Processing, Structure and Properties Proceedings.Warrendale : TMS, 2007.
  • GONCALVES, C. K., Tenório, Jorge Alberto Soares, e LEVENDIS, Y. A. Avaliação das Emissões Gasosas na Pirólise Seguida de Combustão do Poliestireno em Fluxo Contínuo. In ICTR 2006 Gestão Ambiental e Desenvolvimento Sustentável Res~iduos Desafio Brasileiro, São Pedro. Anais do ICTR 2006 Gestão Ambiental e Desenvolvimento Sustentável Res~iduos Desafio Brasileiro.São Paulo : ICTR, 2006.
All rights of the thesis/dissertation are from the authors
CeTI-SC/STI
Digital Library of Theses and Dissertations of USP. Copyright © 2001-2024. All rights reserved.