• JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
 
  Bookmark and Share
 
 
Master's Dissertation
DOI
https://doi.org/10.11606/D.3.2009.tde-04092009-152251
Document
Author
Full name
Laércio Lima Fernandes
E-mail
Institute/School/College
Knowledge Area
Date of Defense
Published
São Paulo, 2009
Supervisor
Committee
Demarquette, Nicole Raymonde (President)
Catalani, Luiz Henrique
Fechine, Guilhermino José Macedo
Title in Portuguese
Obtenção da blenda polipropileno reprocessado/poliestireno de alto impacto e seu comportamento diante a radiação UV.
Keywords in Portuguese
Blenda
Fotodegradação
Poliestireno de alto impacto
Polipropileno
Abstract in Portuguese
A utilização da tecnologia de produção de blendas poliméricas sempre está relacionada com a soma das características individuais de cada um dos componentes da blenda. No caso específico da blenda polipropileno - PP e poliestireno de alto impacto - HIPS esta relação está mais especificamente relacionada com a melhoria na propriedade de resistência ao impacto do PP. Contudo, outras propriedades também devem ser avaliadas. Um outro fator bastante importante é como esta blenda se comportará diante situações reais de uso, por exemplo, exposição à radiação UV. Este trabalho apresenta as propriedades mecânicas e morfológicas da blenda PP/HIPS na composição 90/10, 80/20 e 70/30, sendo que na obtenção dessa blenda utilizou-se dois tipos de polipropileno, um previamente termodegradado (PPreprocessado) e outro virgem (PPv). Foram testados na blenda três tipos de compatibilizantes (SBS, SEBS e PP-g-PS) com o intuito de melhorar a adesão entre as fases. Além disso esse trabalho apresenta os efeitos da radiação UV nas blendas e nos componentes que a formam. Os materiais foram expostos a radiação artificial e foram caracterizados quanto as suas modificações químicas, físicas e mecânicas. As superfícies de fratura dos corpos de prova de impacto foram também analisadas. Por meio dos resultados obtidos pode-se perceber que a mistura PP/HIPS apresenta imiscibilidade entre seus componentes e que a diferença entre os dois tipos de PP resulta em diferentes valores para as propriedades das misturas. Entre os compatibilizantes adicionados o SBS foi o que proporcionou melhores resultados. Ao se analisar a influência da radiação UV nos componentes que formam as blendas PP/HIPS observou se que o PPrep e o PPvir se mostraram sensíveis ao processo degradativo. As propriedades dos materiais diminuíram drasticamente sob efeito da radiação UV. Entretanto quando foram estudados os efeitos da radiação UV nas propriedades das blendas PP/HIPS e o PPrep/HIPS foi observado que as blendas com maiores proporções de HIPS foram mais fotoestáveis, ou seja, as blendas tiveram menores perdas nas propriedades com o tempo de exposição.
Title in English
Obtenained blend polipropylene reprocessed/polyestyrene hight impact of behavoir exposed UV radiation.
Keywords in English
Blends
Photodegradation
Abstract in English
Polymer blend technology is always related with a synergism between the individual properties of the components of the blend components. In the specific case of the polypropylene (PP) and high impact polystyrene (HIPS) blend, this relation is based on the impact strength improvement of PP. However, other properties should also be evaluated. Another important factor is the blend behavior upon real use conditions, such as UV radiation exposure. The mechanical and morphological properties of PP/HIPS blends are presented in this work. Two types of polypropylene were used during the blend preparation: one previously thermodegraded (reprocessed PP) and another virgin (PPv). In addition, UV radiation effects on the blends and on their components are shown. The materials were exposed to artificial radiation, and this exposure was characterized by means of chemical, physical and mechanical modification, as well as by fracture surface analysis. The results showed that the PP/HIPS blend presents immiscibility between its components. The difference between the two polypropylenes used resulted in differences in the blends properties. Besides that, the blends with higher HIPS content showed greater photostability when exposed to UV radiation.
 
WARNING - Viewing this document is conditioned on your acceptance of the following terms of use:
This document is only for private use for research and teaching activities. Reproduction for commercial use is forbidden. This rights cover the whole data about this document as well as its contents. Any uses or copies of this document in whole or in part must include the author's name.
FINAL.pdf (4.91 Mbytes)
Publishing Date
2009-09-25
 
WARNING: Learn what derived works are clicking here.
All rights of the thesis/dissertation are from the authors
CeTI-SC/STI
Digital Library of Theses and Dissertations of USP. Copyright © 2001-2024. All rights reserved.