• JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
 
  Bookmark and Share
 
 
Master's Dissertation
DOI
https://doi.org/10.11606/D.23.2013.tde-18022014-164937
Document
Author
Full name
Emanuela de Carvalho Franco
E-mail
Institute/School/College
Knowledge Area
Date of Defense
Published
São Paulo, 2013
Supervisor
Committee
Gavini, Giulio (President)
Falleiros, Neusa Alonso
Souza, Eliana Barbosa de
Title in Portuguese
Avaliação da influência do hipoclorito de sódio na qualidade da superfície e resistência à corrosão de limas de NiTi de diferentes procedências
Keywords in Portuguese
Acabamento superficial
Corrosão
Instrumentos de níquel-titânio
Abstract in Portuguese
O presente estudo avaliou a influência do hipoclorito de sódio a 1% e 2,5% na qualidade do acabamento superficial e na resistência à corrosão de duas limas endodônticas: Race® e Hyflex® através de ensaio eletroquímico de polarização potenciodinâmica cíclica (EPPC) e imagens obtidas por microscopia eletrônica de varredura (MEV). Para o EPPC foram utilizados vinte limas de cada marca comercial (#25, conicidade 0.04 e 25 mm de comprimento). Dez dos vinte instrumentos foram individualmente fixados pelo cabo a uma ponta de fio de cobre 0,12 mm de 20 cm de comprimento e posicionado no interior de uma célula eletroquímica com 500 mL de solução de hipoclorito de sódio (NaClO) 1% (Fórmula&Ação) à temperatura ambiente controlada em 23 ºC (±2) até cobrir a parte ativa do instrumento. Os registros foram feitos com o potenciostato da PAR modelo 273A. O ensaio foi repetido nos mesmos padrões para as outras dez limas da mesma marca comercial com o NaClO 2,5%. Além do EPPC, as limas foram submetidas a exames e análises em MEV antes e depois do teste de corrosão para a obtenção de fotomicrografias dos 3 (três) mm finais de cada lima com o intuito de estabelecer parâmetros para a avaliação final. Das fotomicrografias obtidas, 72 foram escolhidas, inseridas no Power Point sem legenda original de identificação, numeradas aleatoriamente para avaliação e projetadas num monitor para 06 avaliadores orientados e calibrados. Os dados obtidos foram tabulados e submetidos aos testes estatísticos pertinentes (Friedman, Wilcoxon e Mann-Whitney). A lima Hyflex® apresentou uma quantidade maior de alterações superficiais (ranhuras, manchas e materiais depositados) antes e depois do ensaio sendo mais suscetível à corrosão. Race® apresentou uma superfície mais polida e regular. Em relação a concentração do NaClO, percebeu-se que os defeitos presentes se tornavam mais evidentes para a concentração maior (2,5%). Nas duas concentrações os itens que apresentaram diferença significativa foram bordas, ranhuras, microcavidades, rebarbas e material depositado. Concluiuse que o acabamento superficial e a concentração da solução de NaClO influenciam a resistência à corrosão dos instrumentos de NiTi. A lima Race® apresentou menor corrosão e melhor acabamento de superfície do que a lima Hyflex® nas condições experimentais testadas.
Title in English
Evaluation of the influence of sodium hypochlorite in the quality of the surface and resistance to corrosion of NiTi files from different brands
Keywords in English
Corrosion
Nickel Titanium instruments
Surface finishing
Abstract in English
The present paper evaluated the influence of 1% and 2.5% sodium hypochlorite in the quality of the surface finishing and resistance to corrosion of two endodontic files: Race® and Hyflex® by electrochemical test of cyclic power dynamics polarization (EPPC) and images obtained by scanning electronic microscopy (SEM). Twenty files of each commercial brand (#25, 0.04 taper and 25 mm length) were used in EPPC. Ten from the twenty instruments were individually fixed by the handle to a copper wire tip (0.12 mm diameter and 20 cm length) and placed in the interior of an electrochemical cell with 500 mL sodium hypochlorite solution (NaCIO) 1% (Fórmula e Ação) at the environment temperature controlled in 23ºC (±2) until covering the active part of the instrument. Recordings were made with a PAR potentiostat model 273A. The test was repeated in the same pattern to the other ten files from the same commercial brand with NaClO 2.5%. Besides EPPC, the files were submitted to the scanning electronic microscopy (SEM) test before and after the corrosion test to obtain photomicrographs of the final 3 mm of each file in order to establish the parameters for final evaluation. From the obtained photomicrographs, 72 were chosen and inserted in the Power Point without the original identification legend, randomly numbered for evaluation and projected on the screen to the 06 guided and calibrated evaluators. Data obtained were tabbed and submitted to the relevant statistical tests (Friedman, Wilcoxon and Mann-Whitney). The Hyflex® file showed a higher amount of surface alterations (grooves, stains and deposited materials) before and after the test, being more susceptible to corrosion. Race® showed a more polished and regular surface. As to the NaClO concentration, it was seen that the present defects became more evident in the higher concentration (2.5%). In the two concentrations, the items that presented significant differences were edges, grooves, micro cavities, margins and deposited materials. Conclusion was that surface finishing and the concentration of the NaClO solution influenced the resistance to corrosion of NiTi instruments. The Race® file showed the least corrosion and the best surface finishing compared to the Hyflex® file under the tested experimental conditions.
 
WARNING - Viewing this document is conditioned on your acceptance of the following terms of use:
This document is only for private use for research and teaching activities. Reproduction for commercial use is forbidden. This rights cover the whole data about this document as well as its contents. Any uses or copies of this document in whole or in part must include the author's name.
Publishing Date
2014-03-25
 
WARNING: Learn what derived works are clicking here.
All rights of the thesis/dissertation are from the authors
CeTI-SC/STI
Digital Library of Theses and Dissertations of USP. Copyright © 2001-2024. All rights reserved.