• JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
 
  Bookmark and Share
 
 
Master's Dissertation
DOI
https://doi.org/10.11606/D.18.2017.tde-10032017-091729
Document
Author
Full name
Tiago Augusto Moreira
E-mail
Institute/School/College
Knowledge Area
Date of Defense
Published
São Carlos, 2017
Supervisor
Committee
Ribatski, Gherhardt (President)
Hermes, Christian Johann Losso
Parise, José Alberto dos Reis
Title in Portuguese
Análise experimental da influência da adição de nanopartículas a água no coeficiente de transferência de calor para escoamentos monofásicos e ebulição convectiva em microcanais
Keywords in Portuguese
Coeficiente de transferência de calor
Ebulição convectiva
Microcanais
Nanofluidos
Abstract in Portuguese
Dissipadores de calor baseados em microcanais são apresentados como solução para a remoção de fluxos de calor elevados em espaços restritos, pois proporcionam elevados coeficientes de transferência de calor quando comparados a canais convencionais. Tais trocadores também proporcionam elevadas razões entre a área superficial em contato com o refrigerante por unidade de volume do dissipador. Além dos microcanais, a utilização de nanofluidos também se apresenta como tecnologia com potencial de incremento do coeficiente de transferência de calor. Os nanofluidos consistem na adição de nanopartículas a um fluido base visando alterar suas propriedades de transporte termodinâmicas. Neste contexto, o objetivo do presente estudo é avaliar o coeficiente de transferência de calor para escoamentos monofásicos e ebulição convectiva de nanofluidos aquosos no interior de microcanais. Para isto, foram realizados experimentos em canais com diâmetro de 1,1 mm e comprimento de 200 mm para água deionizada, nanofluidos de alumina com diâmetros de 20-30 e 40-80 nm, nanofluidos de dióxido de silício com diâmetros de 15 e 80 nm, e nanofluidos de cobre com diâmetro de 25 nm. Estas soluções foram ensaiadas para concentrações volumétricas de nanopartículas de 0,001, 0,01 e 0,1, velocidades mássicas de 200, 400 e 600 kg/m2s e fluxos de calor de 20 a 350 kW/m2. A análise dos resultados revelou que a adição de nanopartículas a água deionizada proporciona o incremento do número de Nusselt para escoamentos monofásicos, principalmente na região inicial do tubo. Concluiu-se que os efeitos da adição de nanopartículas a um fluido base no coeficiente de transferência de calor durante a ebulição convectiva estão relacionados ao recobrimento da superfície com uma camada porosa. A deposição de nanopartículas com diâmetro inferior a 30 nm resultou na redução do coeficiente de transferência de calor e das instabilidades térmicas do escoamento em relação a água deionizada. O coeficiente de transferência de calor e as instabilidades térmicas não apresentaram variações significativas da deposição de nanopartículas com diâmetro superior a 40 nm. Por meio da análise da textura das superfícies recobertas e do critério de nucleação proposto por Kandlikar et al. (1997) concluiu-se que tal comportamento encontra-se associado aos efeitos do acabamento superficial na densidade de cavidades de nucleação ativas.
Title in English
Experimental analysis of the influence of adding nanoparticles into DI-water on the heat transfer coefficient for single-phase flow and convective boiling inside microchannels
Keywords in English
Flow boiling
Heat transfer coefficient
Microchannels
Nanofluids
Abstract in English
Microchannels based heat exchangers were introduced as a solution to high heat flux removal in restrict spaces due to their high heat transfer coefficients compared to heat exchangers based on conventional channels. The high ratio of surface are per volume is an additional advantage to microchannels in relation to conventional channels. Beside the microchannels technology, the nanofluids also present itself as a technique with potential to increase the heat transfer coefficient. Nanofluids consist of a solution containing nanoparticles dispersed in a base fluid with the goal to improve its thermodynamic and transport properties. In this context, the objective of the present study is to evaluate the heat transfer coefficient for single-phase flow and convective boiling of aqueous nanofluids inside microchannels. Experiments were performed for channels with internal diameter of 1.1mm and 200 mm long for DI-water, nanofluids containing alumina- (nanoparticles diameters of 20-30 and 40-80 nm), silicon dioxide (nanoparticles diameters of 15 and 80 nm), and copper (nanoparticles diameter of 25 nm). These solutions were evaluated for volumetric concentrations of 0.001, 0.01 and 0.1%, mass velocities of 200, 400 and 600 kg/m2s and heat fluxes from 20 to 350 kW/m2. The analysis of the results revealed that the addition of nanoparticles to DI-water causes an increment in the Nusselt number for single phase flows, especially at the inlet of the tube. The results for flow boiling indicated that the effects of adding nanoparticles to the base fluid are related to the deposition on the heating surface of a nanoparticles porous layer due to the boiling process. The deposition of nanoparticles smaller than 30 nm promoted a reduction of the heat transfer coefficient compared to DI-water on a clean surface, and thermal instabilities were minimized. For the deposition of nanoparticles larger than 40 nm these parameters did not presented significant variations in comparison to DI-water. A combined analysis of the surfaces finishing and the criterion of Kandlikar et al. (1997) for bubble nucleation revealed that such behaviors are correlated to the effects of the surface texture associated to the boiling process on the density of active nucleation cavities.
 
WARNING - Viewing this document is conditioned on your acceptance of the following terms of use:
This document is only for private use for research and teaching activities. Reproduction for commercial use is forbidden. This rights cover the whole data about this document as well as its contents. Any uses or copies of this document in whole or in part must include the author's name.
Publishing Date
2017-03-17
 
WARNING: Learn what derived works are clicking here.
All rights of the thesis/dissertation are from the authors
CeTI-SC/STI
Digital Library of Theses and Dissertations of USP. Copyright © 2001-2024. All rights reserved.