• JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
 
  Bookmark and Share
 
 
Master's Dissertation
DOI
https://doi.org/10.11606/D.18.2012.tde-27022013-132909
Document
Author
Full name
Alex Camilli Bottene
E-mail
Institute/School/College
Knowledge Area
Date of Defense
Published
São Carlos, 2012
Supervisor
Committee
Oliveira, João Fernando Gomes de (President)
Diniz, Anselmo Eduardo
Silva, Eraldo Jannone da
Title in Portuguese
Método inovador para texturização de rebolos
Keywords in Portuguese
Desgaste
Dressagem
Retificação
Vibrações de máquinas
Abstract in Portuguese
A retificação representa o processo mais utilizado na usinagem de peças para obtenção de altos níveis de qualidade superficial, dimensional e produtividade. Uma importante etapa da retificação consiste na preparação e condicionamento do rebolo para o corte, a dressagem. Durante a dressagem, a superfície da ferramenta de corte é alterada para obtenção de arestas cortantes de acordo com as especificações desejadas. O objetivo deste trabalho é desenvolver um método para inscrição de texturas na superfície do rebolo que proporcionem melhores condições de corte durante a retificação e, também, possibilite utilizar a retificação como processo para texturização superficial de peças. O método desenvolvido consiste em alterar controladamente a profundidade de dressagem utilizando um excitador eletromecânico fixado na base do dressador de uma retificadora cilíndrica CNC. A movimentação é controlada por um software desenvolvido para sincronizar o deslocamento longitudinal do dressador com ondas senoidais enviadas ao amplificador operacional do excitador. Desta forma, o dressador proporciona inscrição de texturas no rebolo durante a dressagem. O método foi experimentalmente avaliado e sua funcionalidade foi comprovada. Texturas diversas foram inscritas na superfície do rebolo, com até 15 'mü'm de profundidade. Com o uso da texturização de rebolos foi possível obter redução de até 20% da potência específica de corte, sem perda representativa da qualidade final da peça (rugosidade e cilindricidade) e mantendo a vida da ferramenta de corte, em comparação com retificação convencional. Em complemento, o método possibilitou criação de diversos padrões de texturas nas superfícies de peças retificadas, possibilitando utilizar a retificação como um processo de usinagem para este fim.
Title in English
Inovative method for grinding wheel texturing
Keywords in English
Dressing
Grinding
Machine vibrations
Wear
Abstract in English
Grinding represents the most applied machining process to achieve best combination of surface and dimentional quality, also productivity. One important stage of the grinding process is to prepare and condition the grinding wheel surface for the cutting, the dressing operation. During the dressing, wheel surface is changed to acquire cutting specification required for the operation. The objective of this work is develop a method to texturing the grinding wheel surface for better grinding performance and, also, texturing of surfaces through normal grinding cutting. The method controlled changes the dressing depth using an electro-mechanical actuator fixed to the dressing tool base of a CNC grinding machine. The displacement of the dressing tool is controlled using the developed software. It is able to synchronize the longitudinal movement with generated sine waves sent to the operational amplifier of the actuator. Through this movement and control, the dressing tool is able to texture the grinding wheel. The method was experimentally evaluated and its functionally proved. It is possible to inscribe different texturing patterns in the wheel surface, with depth up to 15 'mü'm. Using texturized wheels, is possible to reduce up to 20% the grinding power, without representative losses with the machined workpiece quality (roughness and roundness) and tool life, compared to regular grinding. In addition, it is possible to transfer different textures patterns to the workpiece surface while cutting, enabling grinding s a machining process to produce workpiece patterns.
 
WARNING - Viewing this document is conditioned on your acceptance of the following terms of use:
This document is only for private use for research and teaching activities. Reproduction for commercial use is forbidden. This rights cover the whole data about this document as well as its contents. Any uses or copies of this document in whole or in part must include the author's name.
Publishing Date
2013-03-01
 
WARNING: Learn what derived works are clicking here.
All rights of the thesis/dissertation are from the authors
CeTI-SC/STI
Digital Library of Theses and Dissertations of USP. Copyright © 2001-2024. All rights reserved.