• JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
 
  Bookmark and Share
 
 
Master's Dissertation
DOI
https://doi.org/10.11606/D.18.2013.tde-25032013-150426
Document
Author
Full name
Andressa Ka Yan Ng
E-mail
Institute/School/College
Knowledge Area
Date of Defense
Published
São Carlos, 2013
Supervisor
Committee
Furlan, Ana Paula (President)
Fabbri, Glauco Tulio Pessa
Gouveia, Lilian Taís de
Title in Portuguese
Contribuição ao estudo da deformação permanente de misturas asfálticas densas à luz de ensaios de fluência por compressão uniaxial estática e dinâmica
Keywords in Portuguese
Creep estático e dinâmico
Deformação permanente
Misturas asfálticas densas
Polímero SBS e cal hidratada
Abstract in Portuguese
Esta dissertação apresenta um estudo da deformação permanente de misturas asfálticas à luz dos resultados de ensaios de fluência por compressão uniaxial estática e dinâmica. Para isso, um programa experimental completo foi desenvolvido combinando fatores relacionados às misturas asfálticas e às condições de ensaio. Foram produzidos corpos de prova de misturas asfálticas densas tipo CAUQ com asfalto convencional (CAP 50/70) e com asfalto modificado com polímero SBS (CAP 50/70+SBS), variando o volume de vazios em dois níveis, 4 e 7%, e a presença de aditivo em dois níveis, sem e com cal hidratada. Os corpos de prova foram submetidos a ensaios de fluência com carregamentos estático e dinâmico em dois níveis de tensões, 0,1 MPa e 0,4 MPa, e em duas temperaturas diferentes, 40 e 50ºC. Essas condições do programa experimental permitiram observar o efeito do modificador SBS, da presença da cal e do volume de vazios nas misturas asfálticas, e entender o efeito da temperatura, do nível de tensão e do tipo de carregamento no comportamento de cada tipo de mistura asfáltica. Os resultados indicam que (i) a adição da cal promoveu redução de deformação acumulada somente nas misturas com ligante convencional (CAP 50/70); (ii) as misturas com volume de vazios de 7% apresentam maiores acúmulos de deformação permanente independente da presença de cal, do tipo de carregamento e da temperatura do ensaio, sendo maiores para a mistura asfáltica com CAP 50/70; (iii) as misturas com ligante modificado se mostraram menos sensíveis às variações da temperatura e do nível de tensão; (iv) e a melhora das características das misturas com asfalto modificado com polímero é detectada somente a partir de ensaios dinâmicos.
Title in English
Contribution for the rutting study on hot mixture asphalt by means of static and dynamic creep tests
Keywords in English
Hot mixture asphalt
Polymer modified and hydrated lime
Rutting
Static and dynamic creep test
Abstract in English
This paper presents a study of rutting on hot mixture asphalt (HMA) by means of static and dynamic creep tests. A full factorial experiment was developed considering factors related to HMA and to the test conditions. It was produced HMA (unmodified (CAP 50/70) and SBS modified binders) specimens at two different air voids (4 and 7%) and with or without hydrated lime. The specimens were submitted to static and dynamic creep tests at two stress levels, 0,1 MPa e 0,4 MPa, and two temperatures, 40 e 50ºC. These conditions of the experimental program allowed to observe the effects of the modifier SBS, the presence of the lime and the air voids in HMA, and to understand the effects of the temperature, stress and the type of loading on the behavior of each type of asphalt mix. The results indicate that (i) the addition of lime promoted reduction of accumulative deformation only in mixtures with conventional binder (CAP 50/70), (ii) mixtures with 7% air voids showed greater accumulation of permanent deformation regardless of presence of lime, the type of load and temperature of the test, mainly for the conventional HMA, (iii) the Polymer Modified Asphalt Hot Mix Asphalt (PMA-HMA) were less sensitive to temperature and the stress variation (iv) the improvement of the polymer modified asphalt mixture characteristics (PMA-HMA) were detected only on dynamic load conditions.
 
WARNING - Viewing this document is conditioned on your acceptance of the following terms of use:
This document is only for private use for research and teaching activities. Reproduction for commercial use is forbidden. This rights cover the whole data about this document as well as its contents. Any uses or copies of this document in whole or in part must include the author's name.
Publishing Date
2013-03-28
 
WARNING: Learn what derived works are clicking here.
All rights of the thesis/dissertation are from the authors
CeTI-SC/STI
Digital Library of Theses and Dissertations of USP. Copyright © 2001-2024. All rights reserved.