• JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
 
  Bookmark and Share
 
 
Mémoire de Maîtrise
DOI
https://doi.org/10.11606/D.18.2013.tde-19112013-171029
Document
Auteur
Nom complet
Javier Yesid Mahecha Nuñez
Adresse Mail
Unité de l'USP
Domain de Connaissance
Date de Soutenance
Editeur
São Carlos, 2013
Directeur
Jury
Faxina, Adalberto Leandro (Président)
Bernucci, Liedi Legi Bariani
Fernandes Junior, Jose Leomar
Titre en portugais
Caracterização à fadiga de ligantes asfálticos modificados envelhecidos a curto e longo prazo
Mots-clés en portugais
Ácido polifosfórico
Borracha moída
DSR.
Envelhecimento
Fadiga
Ligantes asfálticos
Polímeros
Resumé en portugais
O trincamento por fadiga é um dos principais mecanismos de deterioração dos pavimentos flexíveis e, mesmo assim, é, ainda hoje, um dos defeitos mais difíceis de serem controlados. Uma das alternativas para a melhoria das características de fadiga das misturas asfálticas é o emprego de ligantes asfálticos modificados, porém, há dúvida se o enrijecimento provocado pela adição dos modificadores pode influenciar a resistência à fadiga da mistura asfáltica. Com o intuito de mensurar características do ligante asfáltico que tenham relação com o trincamento por fadiga da mistura asfáltica, alguns ensaios de laboratório foram desenvolvidos recentemente, destacando-se dois: o ensaio de varredura de tempo (time sweep) e o ensaio de varredura de amplitude linear (LAS). O objetivo deste trabalho é caracterizar o comportamento à fadiga de 12 ligantes asfálticos modificados de mesmo grau de desempenho (PG 76-xx). As formulações CAP+PPA, CAP+SBS, CAP+SBS+PPA, CAP+Borracha, CAP+Borracha+PPA, CAP+PE, CAP+PE+PPA, CAP+EVA, CAP+EVA+PPA, CAP+SBR, CAP+SBR+PPA e CAP+Elvaloy+PPA foram preparadas tendo como base um ligante asfáltico 50/70 de classificação PG 64-xx. Com base na caracterização realizada neste estudo, as principais conclusões são: (a) o material que apresentou melhor vida de fadiga foi o CAP+EVA; (b) o material menos sensível à deformação foi o CAP puro; (c) o menos sensível à temperatura foi o CAP+PPA; (d) o efeito do PPA nos ligantes asfálticos com outros aditivos provocou diminuição da vida de fadiga para a maioria das formulações, aumento da sensibilidade aos níveis de deformação para todas as formulações, diminuição da sensibilidade à temperatura e aumento da sensibilidade ao envelhecimento para a maioria das formulações; (e) tomando por base o ordenamento final das melhores características à fadiga dos ligantes asfálticos segundo os parâmetros analisados, o CAP+Borracha apresenta o melhor desempenho global
Titre en anglais
Fatigue characterization of short-term and long-term aged modified asphalt binders.
Mots-clés en anglais
Aging
Asphalt binder
Crumb rubber
DSR.
Fatigue
Polymer
Polyphosphoric acid
Resumé en anglais
Fatigue cracking is a major mechanism of deterioration of flexible pavements, and even then, it is still one of the defects that are more difficult to control. One alternative to improve fatigue characteristics of asphalt mixtures is the use of modified asphalt binders; however, there is no doubt that the stiffening caused by the addition of modifiers can influence the fatigue resistance of asphalt mixture. In order to measure characteristics of asphalt binders that are related to the fatigue cracking of asphalt mixture, some laboratory tests have been recently developed such as the time sweep and the linear amplitude sweep (LAS) test. The objective of this study is to characterize the fatigue behavior of 12 modified asphalt binders with the same high-temperature performance grade (PG 76-xx). The formulations AC+PPA, AC+SBS, AC+SBS+PPA, AC+Rubber, AC+Rubber+PPA, AC+PE, AC+PE+PPA, AC+EVA, AC+EVA+PPA, AC+SBR, AC+SBR+PPA and AC+Elvaloy+PPA were prepared with a 50/70 base asphalt binder graded as PG 64-xx in the Superpave specification. Based on the characterization made in this study, the main conclusions are the following: (a) the material that showed better fatigue life was the AC+EVA; (b) the material that is less sensitive to deformation was the neat AC; (c) the less sensitive one to temperature was the AC+PPA; (d) the effect of PPA in asphalt binders prepared with other additives caused a reduction in the fatigue life for many formulations, an increase in the sensitivity levels of deformation for all formulations, a reduction in the sensitivity to temperature and an increase in the sensitivity to aging for several formulations; (e) on the final ranking of the characteristics of asphalt binders according to the parameters analyzed in this research study, the AC+Rubber showed the best overall performance
 
AVERTISSEMENT - Regarde ce document est soumise à votre acceptation des conditions d'utilisation suivantes:
Ce document est uniquement à des fins privées pour la recherche et l'enseignement. Reproduction à des fins commerciales est interdite. Cette droits couvrent l'ensemble des données sur ce document ainsi que son contenu. Toute utilisation ou de copie de ce document, en totalité ou en partie, doit inclure le nom de l'auteur.
JYMN2013.pdf (2.85 Mbytes)
Date de Publication
2013-11-22
 
AVERTISSEMENT: Apprenez ce que sont des œvres dérivées cliquant ici.
Tous droits de la thèse/dissertation appartiennent aux auteurs
CeTI-SC/STI
Bibliothèque Numérique de Thèses et Mémoires de l'USP. Copyright © 2001-2024. Tous droits réservés.