• JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
 
  Bookmark and Share
 
 
Doctoral Thesis
DOI
https://doi.org/10.11606/T.18.2016.tde-10052016-110752
Document
Author
Full name
Priscila Rossetto Camiloti
E-mail
Institute/School/College
Knowledge Area
Date of Defense
Published
São Carlos, 2015
Supervisor
Committee
Zaiat, Marcelo (President)
Damianovic, Márcia Helena Rissato Zamariolli
Jeison Núñes, David Alejandro
Ruiz-Filippi, Gonzalo
Silva, Ariovaldo José da
Souza, Theo Syrto Octávio de
Title in Portuguese
Recuperação de enxofre elementar a partir de águas residuárias em reatores anaeróbio/microaerado
Keywords in Portuguese
Enxofre elementar
Membranas de silicone
Microaeração
Sulfeto
Abstract in Portuguese
O objetivo desse projeto de pesquisa foi avaliar a redução do sulfato e promover a remoção do sulfeto, por via de conversão a enxofre elementar, em reatores combinados anaeróbio/microaerado. Para tanto foram utilizados três sistemas com objetivos específicos. A primeira configuração foi um reator anaeróbio de leito fixo e ordenado integrado a um reator microaerado com membrana externa (ABFSB-RME) com o qual se avaliou a influência do tempo de detenção hidráulica (TDH) e da presença de biomassa aderida na remoção do sulfeto. A segunda configuração avaliada foi um reator UASB com um reator microaerado de membrana helicoidal externa (UASB-RMHE), com o qual se avaliou a formação de biofilme no interior da membrana e a alteração do pH para a remoção do sulfeto em sua fase gasosa. A terceira configuração foi um reator anaeróbio de leito fixo e ordenado combinado a um reator microaerado com membrana helicoidal e submersa ao meio liquido (ABFSB-RMHS) com a finalidade de avaliar a remoção do sulfeto com aplicação de fluxo de ar no interior da membrana e avaliar a influência do TDH na eficiência de conversão do sulfeto. Os resultados indicam que a troca periódica das membranas tem influência na eficiência da conversão do sulfeto para o sistema ABFSB-RME. O sistema UASB-RMHE apresentou dados de remoção de sulfeto estáveis durante 35 dias, com remoção de até 90%, porém a retro lavagem da membrana é essencial para o aumento da vida útil do sistema A alteração do pH provocou a deslocamento de equilíbrio do sulfeto, e apresentou remoção do sulfeto no biogás de 98% para pH 7,5 e 50% para pH 7,0. O sistema ABFSB-RMHS propiciou remoção estável de sulfeto e a formação em camadas de enxofre elementar ao redor da membrana que se rompiam permitindo, assim, a sedimentação e recuperação do material sólido. Os resultados obtidos na pesquisa mostraram que os sistemas apresentam viabilidade e potencial no tratamento de águas ricas em compostos de enxofre e para a recuperação de enxofre elementar, além de apresentar versatilidade por meio de variáveis operacionais, com as quais se podem obter o controle e aperfeiçoamento do sistema.
Title in English
Elemental sulfur recovery from wastewater in anaerobic/micro-aerobic reactors
Keywords in English
Elemental sulfur
Micro aeration
Silicon membranes
Sulfide
Abstract in English
The aim of this research study is to evaluate the reduction of sulfate and promote the removal of sulfide by conversion to elemental sulfur in anaerobic/micro-aerobic reactors. Therefore, were used three reactors settings combined with specific aims. The first configuration is an anaerobic fixed-structured bed reactor integrated to a micro-aerobic with external membrane reactor (ABFSB-RME) to evaluate the influence of HRT and the presence of biomass adhered to the removal of sulfide. The second configuration evaluated was an UASB reactor with a micro-aerobic reactor with external and helically wound membrane (UASB-RMHE), in which the biofilm formation within the membrane and the change in pH for the removal of sulfide in a gaseous phase were evaluated. The third configuration was a combination of an anaerobic fixed-structured bed reactor to a micro-aerobic reactor with helically wound and submerged membrane (ABFSB-RMHS) in order to evaluate the removal of sulfide with air flow application within the membrane and to evaluate the influence of hydraulic retention time (HRT) in sulfide removal efficiency. The results indicate that the periodic exchange membranes have influence on the conversion efficiency of the sulfide to ABFSB-RME system. The UASB-RMHE system showed a stable sulfide removal efficiency for 35 days, with removal of up to 90%, but the backwashing of the membrane is essential for increasing the life of the system. The pH changing caused the equilibrium displacement of the sulfide and removal of sulfide introduced into the biogas 98% and 50% and pH 7.5 and pH 7.0. The ABFSB-RMHS removal system has provided stable sulfide removal and sulfur formed around the membrane layers were broken allowing sedimentation and recovering the solid material. The results of the study showed that the systems are versatile and which, by means of the operating variables, can be improved viability and presenting potential in the treatment of water rich in sulfur compounds and for the recovery of elemental sulfur.
 
WARNING - Viewing this document is conditioned on your acceptance of the following terms of use:
This document is only for private use for research and teaching activities. Reproduction for commercial use is forbidden. This rights cover the whole data about this document as well as its contents. Any uses or copies of this document in whole or in part must include the author's name.
Publishing Date
2016-05-12
 
WARNING: Learn what derived works are clicking here.
All rights of the thesis/dissertation are from the authors
CeTI-SC/STI
Digital Library of Theses and Dissertations of USP. Copyright © 2001-2024. All rights reserved.