• JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
 
  Bookmark and Share
 
 
Mémoire de Maîtrise
DOI
https://doi.org/10.11606/D.18.2003.tde-10112015-111107
Document
Auteur
Nom complet
Leopoldo Pisanelli Rodrigues de Oliveira
Unité de l'USP
Domain de Connaissance
Date de Soutenance
Editeur
São Carlos, 2003
Directeur
Jury
Varoto, Paulo Sergio (Président)
Baltazar, José Manoel
Marques, Flávio Donizeti
Titre en portugais
Interação entre os excitadores de vibração e a estrutura sob estudo em ensaios com múltipla excitação
Mots-clés en portugais
Análise modal experimental
Dinâmica estrutural
Excitador eletrodinâmico
Múltipla excitação
Resumé en portugais
Apresenta-se um estudo analítico e experimental do fenômeno de interação entre excitadores eletrodinâmicos e a estrutura em ensaios de vibração e discutem-se causas e efeitos desta interação na qualidade dos resultados obtidos. Inicialmente, realizam-se simulações numéricas que contemplam as características mecânicas e eletromagnéticas do excitador. Definido o modelo para o excitador, realizam-se simulações de teste com estruturas, dos quais obtêm-se as forças de entrada e funções de resposta em freqüência (FRFs) estimadas que serão comparadas às FRF reais da estrutura. Posteriormente, considera-se a inclusão de graus de liberdade rotacionais aos modelos do excitador e da estrutura. Finalmente, as simulações de testes com múltipla excitação têm como objetivo principal o de observar os fenômenos de queda de força de excitação e seus efeitos sobre as FRFs estimadas. Com os resultados experimentais verificam-se os principais fenômenos da interação excitador / estrutura observados nas simulações numéricas tais como a queda da força de excitação e a influência da dinâmica do conjunto excitador / amplificador na resposta da estrutura. Através dos resultados experimentais obtidos com uma viga metálica observam-se os principais efeitos previstos pelas simulações. Ainda, comparam-se as alterações nos dados obtidos com outros métodos de excitação tais como, martelo impulsivo e excitação em malha fechada. Testes realizados com diferentes estruturas, como um pneumático e um chassi tubular, vêem complementar os dados obtidos até então para excitação com um único excitador. Os testes realizados com a finalidade de validar os modelos que incluem graus de liberdade rotacionais mostram que tais grandezas não podem ser negligenciadas, principalmente no que se referem aos testes com excitação via base, em que o item de teste é montado diretamente sobre o excitador. Ainda, verificam-se os resultados obtidos com diversos estimadores de FRFs em ensaios com acréscimo de ruído aos sinais de entrada e saída. Os resultados experimentais realizados com dois excitadores mostram os mesmos efeitos observados nas simulações, em geral uma redução na queda da força de excitação e uma melhor distribuição de energia pela estrutura.
Titre en anglais
Interaction between electrodynamic exciters and the structure under test in multiple input tests
Mots-clés en anglais
Electrodynamic shaker
Experimental modal analysis
Multiple input tests
Structural dynamics
Resumé en anglais
An analytical and experimental study of the interaction between electrodynamic exciters and the structure under test is presented, and the causes and effects of this interaction on the obtained data quality are discussed. Initially, some numerical simulations are performed concerning the shaker's mechanical and electrical features. Once the shaker model is defined, some tests with structures were simulated in order to obtain the input forces and the estimated frequency response functions to be compared with the measured FRFs. Afterwards, the rotational degrees of freedom were included in the shaker and structure models. Ending this section, tests with multiple input forces were simulated. The experimental results confirm most of the phenomena observed in the simulation section, such as the input force drop-off and the influence of the shaker / power amplifier assembly on the structure's response. The tests conducted with a steal beam confirmed the effects predicted by the simulations. Therefore, these results are compared with others, obtained from alternative methods such as impact test and closed loop shaker tests. Tests with structures like a truck tyre and a tubular chassis complement the assessment of single input tests. The tests performed with the objective of validating the models considering rotational degrees of freedom show that these quantities cannot be neglected, mainly when base driven tests are concerned. Also, the efficiency of FRF estimators applied to shaker tests, in the presence of noise on the input and output channels is verified experimentally. The multiple input tests corroborate the effects observed in the simulations, in general, a reduction of the droopoff on the force and an improvement on the input energy distribution on the structure.
 
AVERTISSEMENT - Regarde ce document est soumise à votre acceptation des conditions d'utilisation suivantes:
Ce document est uniquement à des fins privées pour la recherche et l'enseignement. Reproduction à des fins commerciales est interdite. Cette droits couvrent l'ensemble des données sur ce document ainsi que son contenu. Toute utilisation ou de copie de ce document, en totalité ou en partie, doit inclure le nom de l'auteur.
Date de Publication
2015-11-11
 
AVERTISSEMENT: Apprenez ce que sont des œvres dérivées cliquant ici.
Tous droits de la thèse/dissertation appartiennent aux auteurs
CeTI-SC/STI
Bibliothèque Numérique de Thèses et Mémoires de l'USP. Copyright © 2001-2024. Tous droits réservés.