• JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
 
  Bookmark and Share
 
 
Master's Dissertation
DOI
https://doi.org/10.11606/D.18.2016.tde-31032016-165919
Document
Author
Full name
Luiz Fernando de Oliveira Friedel
Institute/School/College
Knowledge Area
Date of Defense
Published
São Carlos, 2016
Supervisor
Committee
Paccola, Rodrigo Ribeiro (President)
Moreno, Mariano Eduardo
Pascon, João Paulo
Title in Portuguese
Análise de estruturas planas reforçadas com fibras ativas viscoelásticas e matriz com modelo constitutivo hiperelástico: aplicações gerais em engenharia e biomecânica
Keywords in Portuguese
Análise não linear de estruturas
Elasticidade não linear
Fibras com comportamento ativo
Fibras viscoelásticas
Hiperelasticidade
Materiais compósitos
Métodos dos elementos finitos
Abstract in Portuguese
Neste trabalho apresenta-se uma formulação para modelagem não linear geométrica e não linear elástica de materiais compósitos através da imersão de elementos finitos de barra simples em elementos finitos triangulares do tipo chapa utilizando uma formulação inovadora do método dos elementos finitos baseada em posições. Essa formulação posicional utiliza funções de forma para aproximar grandezas definidas na Teoria da Elasticidade Não Linear e propõe que a energia específica de deformação e o potencial das cargas externas sejam escritos em função das posições nodais definidas a partir de uma função mudança de configuração. Assumindo as posições nodais valores atuais em cada nó, esse método considera naturalmente a não linearidade geométrica, ao passo que relações não lineares entre tensão e deformação podem ser consideradas através de uma teoria elástica não linear denominada hiperelasticidade que permite obter leis constitutivas linearizadas em formato variacional. Utilizando malhas independentes para os elementos de barras e chapa, a técnica para a imersão das barras adota funções de forma para escrever a posição de qualquer ponto de um elemento de barra em função dos nós dos elementos de chapa, não ocorrendo, portanto, nem o aumento do número de graus de liberdade nem a necessidade de que os nós dos elementos de barra coincidam com os nós dos elementos de chapa. Além disso, nesse trabalho propõe-se também uma formulação posicional para os elementos de barra simples que utiliza uma medida de deformação chamada de não linear de engenharia, a qual permite introduzir facilmente um comportamento tanto ativo quanto viscoso nos elementos de barra imersos. As formulações propostas são idealizadas para a modelagem de tecidos musculares, não estando, no entanto, limitadas somente a esse tipo de aplicação. Os quatro primeiro exemplos escolhidos são casos simples, alguns inclusive com soluções analíticas, e são destinados principalmente à validação das formulações apresentadas. Através da modelagem de uma estrutura formada por braço e antebraço, o quinto e último exemplo demonstra as potencialidades dos conceitos trabalhados e das formulações propostas durante este trabalho.
Title in English
Analysis of plane structures reinforced with active viscoelastic fibers and matrix with hyperelastic constitutive model: general applications in engineering and biomechanics
Keywords in English
Composites
Fibers with active behavior
Finite element method
Hyperelasticity
Nonlinear elasticity
Nonlinear structural analysis
Viscoelastic fibers
Abstract in English
This work presents a formulation for material and geometrical nonlinear analysis of composite materials by immersion of truss finite elements into triangular 2D solid ones using a novel formulation of the finite element method based on positions. This positional formulation uses the shape functions to approximate some quantities defined in the Nonlinear Theory of Elasticity and proposes to describe the specific strain energy and the potential of the external loads as function of nodal positions which are set from a deformation function. Because the nodal positions have current values in each node, this method naturally considers the geometric nonlinearities while the nonlinear relationships between stress and strain may be considered by a pure nonlinear elastic theory called hyperelasticity which allows to obtain linearized constitutive laws in its variational form. If independent meshes are used for the truss elements and for the 2D solid elements, the immersion technique of the trusses adopts shape functions to write the position of any point of a truss as a function of the nodal positions of the 2D solid elements, therefore there is neither an increase in the number of degrees of freedom nor the need that the nodes of the trusses elements coincide with the nodes of the 2D solid elements. Moreover, this work also proposes a positional formulation for the truss elements using a so called nonlinear engineering strain which allows to easily introduce both active and viscous behavior in the immersed truss elements. The proposed formulations are idealized for muscle tissue modeling, however they are not limited only to this type of application. The first 4 chosen examples are simple cases, some of them even with analytical solutions, mainly for validation purposes of the presented formulations. By modeling a structure formed by an arm and an forearm, the 5th and last example shows the potentialities of the concepts and proposed formulations during this work.
 
WARNING - Viewing this document is conditioned on your acceptance of the following terms of use:
This document is only for private use for research and teaching activities. Reproduction for commercial use is forbidden. This rights cover the whole data about this document as well as its contents. Any uses or copies of this document in whole or in part must include the author's name.
Publishing Date
2016-04-01
 
WARNING: Learn what derived works are clicking here.
All rights of the thesis/dissertation are from the authors
CeTI-SC/STI
Digital Library of Theses and Dissertations of USP. Copyright © 2001-2024. All rights reserved.