• JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
 
  Bookmark and Share
 
 
Master's Dissertation
DOI
https://doi.org/10.11606/D.18.2013.tde-23092013-091812
Document
Author
Full name
Magda Lorena Chilito Amaya
E-mail
Institute/School/College
Knowledge Area
Date of Defense
Published
São Carlos, 2013
Supervisor
Committee
Dias, Antonio Alves (President)
Calil Junior, Carlito
Máscia, Nilson Tadeu
Title in Portuguese
Reforço de emendas dentadas com compósitos de fibras em peças de madeira
Keywords in Portuguese
Compósitos
Curauá
Fibra de vidro
Fibras naturais
Reforço de emendas dentadas
Sisal
Abstract in Portuguese
A presente pesquisa teve como objetivo avaliar o uso de compósitos de fibras e resina epóxi no reforço de emendas dentadas em peças de madeira. Inicialmente, foi avaliada a influência da trama das fibras de sisal e de curauá sem tratamento nenhum nas propriedades mecânicas à tração dos compósitos com resina epóxi. Igualmente, foram caracterizados na tração compósitos de fibras de vidro e tecidos de sisal. Posteriormente, foi avaliada a resistência à tração paralela às fibras de peças de madeira Pinus sp em tamanho estrutural para três tipos de tratamentos: (1) peças sem emendas e sem reforço, (2) peças com emendas e sem reforço e (3) peças com emendas reforçadas por compósitos de fibras de vidro e resina epóxi. Também foram realizados testes de tração em corpos de prova isentos de defeitos com emendas dentadas usando madeira Lyptus® para três casos: (1) sem reforço na emenda, (2) reforço na emenda com fibra de vidro e (3) reforço na emenda com tecido de sisal. Os resultados da influência da trama das fibras de sisal e curauá com a resina epóxi nos testes de tração mostraram que o tipo de trama não influenciou significativamente na resistência e no módulo de elasticidade. Na caracterização dos compósitos poliméricos, a resistência do tecido de sisal foi cerca de 44% da resistência da fibra de vidro. Nas peças estruturais, devido à baixa resistência da madeira de Pinus sp utilizada, não se justificou a utilização do reforço. Nos corpos de prova isentos de defeitos de madeira Lyptus® com emendas dentadas, a eficácia do reforço foi evidenciado, com aumento de 37% na resistência à tração com reforço de fibra de vidro e de 40% com reforço de tecido de sisal, em relação aos corpos de prova isentos de defeitos sem reforço.
Title in English
Reinforcement finger joints with fibers composites in pieces of wood
Keywords in English
Composites
Curaua
Fiberglass
Natural fibers
Reinforcement of finger joints
Sisal
Abstract in English
The present research evaluate the reinforcing of finger joints in timber pieces with composite fiber and epoxy. Initially, the influence of the weft in the tensile mechanical properties of composites using sisal fibers and curaua without any treatment was evaluated. The characterization of composites made with sisal fibers and glass fibers were also carried out. Additionally, the tensile strength parallel to the grain for pieces of Pinus sp in structural sizes for three types of treatments: (1) pieces without finger joints, (2) pieces unreinforced finger joints and (3) pieces reinforced finger joints with composite fiberglass and epoxy resin, was evaluated. Also, was evaluated the tensile strength of the finger joint test specimens Lyptus® wood for three cases: (1) unreinforced finger joint, (2) reinforced finger jointed with fiberglass and (3) reinforced finger jointed with fabric sisal. The results of influence of the weft sisal fibers and curaua with epoxy resin of tensile test showed that the weft did not significantly influence the strength and the modulus of elasticity. The characterization of polymeric composites, the strength of sisal fabric was about 44% of the fiber glass strength. The structural size pieces, the use of reinforcement it is not justified due to the low strength of the Pinus sp wood used. The test specimens of Lyptus® wood with finger joints, the efficacy of the reinforcement was evident, with 37% increase in tensile strength with glass fiber reinforcement and 40% with reinforcement sisal fabric, compared to specimens without reinforcement.
 
WARNING - Viewing this document is conditioned on your acceptance of the following terms of use:
This document is only for private use for research and teaching activities. Reproduction for commercial use is forbidden. This rights cover the whole data about this document as well as its contents. Any uses or copies of this document in whole or in part must include the author's name.
Publishing Date
2013-09-24
 
WARNING: Learn what derived works are clicking here.
All rights of the thesis/dissertation are from the authors
CeTI-SC/STI
Digital Library of Theses and Dissertations of USP. Copyright © 2001-2024. All rights reserved.