• JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
 
  Bookmark and Share
 
 
Master's Dissertation
DOI
https://doi.org/10.11606/D.18.2015.tde-14082015-091127
Document
Author
Full name
Karen Fernanda Bompan Schiavon
Institute/School/College
Knowledge Area
Date of Defense
Published
São Carlos, 2015
Supervisor
Committee
Haach, Vladimir Guilherme (President)
Pinto, Roberto Caldas de Andrade
Tarpani, José Ricardo
Title in Portuguese
Estudo da aplicação de ultrassom na medição de tensões em estruturas de concreto
Keywords in Portuguese
Acustoelasticidade
Ensaios não destrutivos
Medição de tensões
Ondas ultrassônicas
Abstract in Portuguese
Os ensaios não destrutivos visam avaliar um elemento sem gerar danos a ele com a técnica empregada. Um tipo de ensaio não destrutivo é o método da velocidade do pulso de ondas ultrassônicas. Este método é comumente utilizado para determinar propriedades elásticas de um dado material e verificar danos no interior dos elementos estudados. Outra aplicação do ultrassom é a medição do nível de tensão num material por meio da propagação das ondas ultrassônicas, tendo como base a teoria da acustoelasticidade. Entretanto, o uso do ultrassom para esta finalidade ainda é pouco difundido, principalmente na aplicação em estruturas de concreto. Este trabalho teve como objetivo estudar a possibilidade de medir tensões em estruturas de concreto com o uso do ultrassom. Para tanto, foram realizados ensaios de compressão uniaxial em prismas de concreto. Durante os ensaios, foram emitidas ondas ultrassônicas nos elementos para cada nível de tensão aplicada no material. A partir destes ensaios, foi feito um estudo do comportamento acustoelástico do concreto. Verificou-se que as velocidades das ondas ultrassônicas variaram em função da intensidade das tensões normais de compressão existentes nos corpos de prova. Com base na variação das velocidades, os coeficientes acustoelásticos do concreto de cada prisma foram determinados e relacionados com propriedades do concreto. Verificou-se a possibilidade de se estimar o nível mínimo de tensão em determinadas estruturas de concreto a partir do conhecimento de seus coeficientes acustoelásticos. Concluiu-se que é possível estimar tensões em estruturas de concreto utilizando o ultrassom.
Title in English
Study of application of ultrasound to measure stresses in concrete structures
Keywords in English
Acoustoelasticity
Measurement of stress
Nondestructive tests
Ultrasonic waves
Abstract in English
Nondestructive tests aim to analyze an element generating no damages. The pulse velocity of ultrasonic waves method is a type of nondestructive test. This method is commonly used to determine elastic properties of materials and to verify damages inside studied elements. Another application for ultrasound is the measurement of stress level in a material by means of propagation of ultrasonic waves. This application is based on the theory of acoustoelasticity. However, the use of ultrasound is still unusual for this purpose, mainly in application in concrete structures. This work intended to study the possibility of measuring stresses in concrete structures with the use of ultrasound. Uniaxial compression tests were performed on concrete prisms. During tests, ultrasonic waves were propagated in elements for each level of applied stress in the material. Then, a study about acoustoelastic behavior of concrete was performed. It was verified that the velocities of ultrasonic waves changed according to the intensity of normal compressive stresses there were in the specimens. Based on the variation of velocities, the acoustoelastic coefficients of concrete were determined for each prism. The coefficients were related with properties of concrete. The possibility of estimating the minimum level of stress in certain structures of concrete from their acoustoelastic coefficients was verified. It was concluded it is possible to estimate stresses in concrete structures using ultrasound.
 
WARNING - Viewing this document is conditioned on your acceptance of the following terms of use:
This document is only for private use for research and teaching activities. Reproduction for commercial use is forbidden. This rights cover the whole data about this document as well as its contents. Any uses or copies of this document in whole or in part must include the author's name.
Publishing Date
2015-08-19
 
WARNING: Learn what derived works are clicking here.
All rights of the thesis/dissertation are from the authors
CeTI-SC/STI
Digital Library of Theses and Dissertations of USP. Copyright © 2001-2024. All rights reserved.