• JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
 
  Bookmark and Share
 
 
Master's Dissertation
DOI
https://doi.org/10.11606/D.18.2017.tde-11122017-114407
Document
Author
Full name
Rubens Fernandes de Matos Filho
Institute/School/College
Knowledge Area
Date of Defense
Published
São Carlos, 1999
Supervisor
Committee
Paiva, João Batista de (President)
Aoki, Nelson
Coda, Humberto Breves
Title in Portuguese
Análise da interação estaca-solo via combinação do Método dos Elementos Finitos com o Método dos Elementos de Contorno
Keywords in Portuguese
Estacas flexíveis
Grupos de estacas
Interação estaca-solo
Método das diferenças finitas
Método dos elementos de contorno
Método dos elementos finitos
Abstract in Portuguese
Neste trabalho apresenta-se uma combinação de formulações numéricas para a análise da interação estaca-solo com ou sem blocos de capeamento rígido, sujeita à carga horizontal e vertical. Nestas formulações as estacas são representadas pelo método das diferenças finitas (MDF) ou pelo método dos elementos finitos (MEF) e o solo é representado pelo método dos elementos de contorno (MEC). Na utilização do MEF, para a análise das estacas, os deslocamentos e as forças de interação foram representados por várias funções polinomiais chegando-se a um elemento finito final considerado eficiente e constituído por quatro pontos nodais, 14 parâmetros nodais, sendo quatro para deslocamentos lineares em cada uma das direções (X1, X2 e X3) e mais dois parâmetros referentes as rotações do topo da estaca em torno dos eixos X1 e X2. Os deslocamentos transversais ao longo da estaca foram representados por uma função polinomial do 4º grau e os deslocamentos axiais foram representados por uma função cúbica. Para as forças da interface nas direções X1 e X2 são utilizados funções polinomiais cúbicas. As forças de superfície cisalhantes que ocorrem ao longo do fuste da estaca são representadas por um polinômio quadrático e a tensão normal à seção da extremidade inferior da estaca é suposta constante. O maciço de solos é modelado pelo MEC como um meio contínuo, elástico-linear, semi-infinito, isótropo e homogêneo. Combinando-se estes métodos de análise, obtém-se um sistema de equações lineares representando o problema de interação estaca-solo. Após a resolução deste sistema, são obtidos os deslocamentos e rotações nos nós do elemento e as tensões de contato estaca-solo. Vários exemplos envolvendo as formulações propostas são analisados e os resultados obtidos são concordantes com os de outros autores.
Title in English
Pile-soil interaction by combination of the finite and boundary element method
Keywords in English
Boundary element method
Finite different method
Finite element method
Flexible piles
Pile group
Pile-soil interaction
Abstract in English
This work presents a mixed numerical formulation of analysis of the pile-soil interaction, with or without rigid caps, under horizontal and vertical loads. In these formulations the piles are modeled by finite difference method (FDM) or finite element method (FEM) and the soil is represented by the boundary element method (BEM). In the finite element method for the pile analysis the displacements and interactions forces with the soil were represented by several polynomials functions leading to an efficient element with four nodal points, 14 nodal parameters, where four parameters are the linear displacements for each directions (X1, X2 e X3) and two parameters for the rotations at the top of the pile. The transversal displacements along the pile were represented by a fourth degree polynomial and the axial displacements were represented by cubic functions. The interface forces in the X1 and X2 directions are represented by cubic functions. The shear contact forces along of the pile surface are approximated by a second degree polynomial and the normal tractions in the pile tip is assumed to be constant over its crosssection. The soil is modeled by BEM as an isotropic, homogeneous, semi-infinite and linear-elastic continuum. Combining these analysis methods a complete system representing a pile-soil interaction problem can be obtained and from it the displacements and the pile-soil contact tractions can be achieved. Various examples are presented and the results closely agree with others authors.
 
WARNING - Viewing this document is conditioned on your acceptance of the following terms of use:
This document is only for private use for research and teaching activities. Reproduction for commercial use is forbidden. This rights cover the whole data about this document as well as its contents. Any uses or copies of this document in whole or in part must include the author's name.
Publishing Date
2017-12-11
 
WARNING: Learn what derived works are clicking here.
All rights of the thesis/dissertation are from the authors
CeTI-SC/STI
Digital Library of Theses and Dissertations of USP. Copyright © 2001-2024. All rights reserved.