• JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
 
  Bookmark and Share
 
 
Master's Dissertation
DOI
https://doi.org/10.11606/D.18.2016.tde-02052016-155809
Document
Author
Full name
Juliana Zapata Galvis
Institute/School/College
Knowledge Area
Date of Defense
Published
São Carlos, 2015
Supervisor
Committee
Esquivel, Edmundo Rogério (President)
Aoki, Nelson
Bernardes, George de Paula
Title in Portuguese
Estimativa das tensões internas e externas atuantes no amostrador SPT durante sua cravação
Keywords in Portuguese
Eficiência
Energia
Ensaio SPT
Instrumentação dinâmica
Parâmetro a de Aoki
Tensões no amostrador
Abstract in Portuguese
O ensaio SPT (Standard Penetration Test) é um dos ensaios geotécnicos mais utilizados no Brasil e em grande parte do mundo, para determinar o índice NSPT. Esse índice é usado para estimar, através de correlações empíricas, parâmetros do solo, capacidade de suporte, recalque de fundações, etc. Pelo fato destas correlações não terem nenhum fundamento científico, pesquisadores têm procurado desenvolver métodos racionais de análise, baseados em energia. Com esses métodos pode-se determinar a eficiência do ensaio SPT, que é uma importante característica utilizada nas análises dos resultados do ensaio. As quantidades de energia envolvidas no ensaio SPT são determinadas através do método EFV. Para tanto, é necessária a utilização de hastes instrumentadas com acelerômetros e células de carga durante a realização dos ensaios. Com os sinais de força e aceleração foram determinadas as quantidades de energia, força de reação dinâmica experimental do solo, forças de reação teórica estática e dinâmica e tensões atuantes no amostrador. Neste trabalho, como os sinais de força e aceleração foram registrados em uma seção instrumentada logo acima do amostrador, a eficiência do sistema pode ser determinada de acordo com a definição proposta por Aoki e Cintra (2000), e incluindo a correção sugerida por Odebrecht (2003). Nesta pesquisa foi desenvolvido um sistema de extrator de amostras, constituído de uma base, um cilindro hidráulico e uma célula de carga, para quantificar experimentalmente a força de atrito interno para posteriormente determinar as demais tensões que atuam no amostrador e o parâmetro a de Aoki, o qual é a razão entre o atrito interno e o atrito externo entre o solo e o amostrador.
Title in English
Evaluation of internal and external average stresses on the SPT sampler
Keywords in English
Aoki's a parameter
Dynamic instrumentation
Efficiency
Energy
SPT test
Stress on the sampler
Abstract in English
The Standard Penetration Test (SPT) is one of the in-situ geotechnical tests most used in Brazil, as well as in many parts of the world. Through empirical correlations, the NSPT index is used to estimate parameters of the soil, carrying capacity, discharge of foundations, etc. Because these correlations have no scientific basis, researchers have developed rational methods of analysis, based on energy concepts. Using these concepts, the efficiency of the SPT, which is essential in the analysis of the test results, can be assessed. The amounts of energy involved in the SPT test are evaluated by the EFV method. Therefore, it is necessary instrumented rods with accelerometers and load cells for performing the tests. With force and acceleration records, amounts of energy, experimental dynamic reaction force of the soil, theoretical static and dynamic reaction forces and stresses acting on the sampler were assessed. In this work, as the force and acceleration signals were recorded at an instrumented section just above the sampler, the system efficiency could be determined according to the definition proposed by Cintra and Aoki (2000), including the energy corrections suggested by Odebrecht (2003). In this study, a sample extractor system consisting of a base, a hydraulic cylinder and a load cell was designed. The objective of this equipment is to experimentally quantify the internal friction force, allowing evaluating the stresses acting on the sampler. Also, the Aoki's a parameter, which is the ratio of internal friction and external friction between the ground and the sampler, could be calculated.
 
WARNING - Viewing this document is conditioned on your acceptance of the following terms of use:
This document is only for private use for research and teaching activities. Reproduction for commercial use is forbidden. This rights cover the whole data about this document as well as its contents. Any uses or copies of this document in whole or in part must include the author's name.
Publishing Date
2016-05-09
 
WARNING: Learn what derived works are clicking here.
All rights of the thesis/dissertation are from the authors
CeTI-SC/STI
Digital Library of Theses and Dissertations of USP. Copyright © 2001-2024. All rights reserved.