• JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
 
  Bookmark and Share
 
 
Doctoral Thesis
DOI
https://doi.org/10.11606/T.11.2005.tde-31052005-170719
Document
Author
Full name
Marcio Roberto Soares
E-mail
Institute/School/College
Knowledge Area
Date of Defense
Published
Piracicaba, 2004
Supervisor
Committee
Alleoni, Luis Reynaldo Ferracciú (President)
Camargo, Otavio Antonio de
Casagrande, Jose Carlos
Hiromoto, Goro
Melo, Wanderley José de
Title in Portuguese
Coeficiente de distribuição (Kd) de metais pesados em solos do estado de São Paulo.
Keywords in Portuguese
metal pesado do solo
propriedades físico-químicas
solos
Abstract in Portuguese
A disposição de resíduos sólidos e a aplicação de pesticidas e fertilizantes podem levar ao aumento da concentração de metais pesados em solos e águas subterrâneas. A legislação sobre metais pesados quase sempre se refere aos seus teores totais, mas a avaliação do potencial de risco e da toxicidade requer a avaliação da proporção de metal que é móvel e, possivelmente, biodisponível. Alguns parâmetros numéricos têm sido utilizados para tomadas de decisões e para direcionar estratégias de prevenção ou de remediação de áreas contaminadas. O coeficiente de distribuição sólido-solução (Kd), definido como a relação entre as concentrações adsorvida e em solução, permite a comparação do comportamento de elementos em diferentes sistemas. Agências de proteção ambiental utilizam valores genéricos de Kd encontrados em referências bibliográficas que, por terem sido gerados a partir de condições distintas das da região tropical, podem levar a incorretas estimativas de risco. É evidente a necessidade da obtenção de valores de Kd que validem estas estimativas de contaminação ou que norteiem estratégias de intervenção em áreas já contaminadas. Os objetivos deste trabalho foram avaliar a retenção de metais pesados em 30 solos representativos do Estado de São Paulo, a partir da quantificação dos valores do coeficiente de distribuição (Kd) e da relação com atributos dos solos, tais como pH, CTC e teores de argila, matéria orgânica e de diversas formas de óxidos de Fe, Al e de Mn. Os coeficientes de distribuição foram obtidos de isotermas lineares de adsorção, construídas após a adição de 0,1; 0,5; 1,0; 2,5 e 5,0 mg L-1 de Cd, Co, Cr, Cu, Ni, Pb e Zn, em experimentos tipo batch. As menores variações nos valores de Kd foram registradas para o Pb (uma ordem de magnitude - 121 a 7.020 L kg-1) e para o Ni (duas ordens de magnitude - 6 a 998 L kg-1), enquanto variações de quatro ordens de magnitude foram observadas para Cd (7-14.339 L kg-1), Co (2-34.473 L kg-1) e para Cr (1-21.267 L kg-1). Coeficientes de distribuição de zinco estiveram entre 5 a 123.849 L kg-1, variando cinco ordens de magnitude. Os valores foram similares àqueles que vêm sendo utilizados pela CETESB, exceto os de Cr e Ni. Obteve-se a seguinte ordem de afinidade: Pb>>>Cu>>Cd>Zn≅Ni≅Cr>Co. Mais de 55% da variação dos coeficientes de distribuição de cátions metálicos dos grupos IIB (Cd e Zn) e VIIIB (Co e Ni) foram explicados pelo pH. Na análise conjunta, CTC e pH explicaram cerca de 80% da variação dos valores de Kd de Cd, Co e de Ni e evidenciaram que mecanismos de adsorção não-específica estão envolvidos na retenção destes elementos. No caso dos coeficientes de distribuição de Cu e de Pb, o pH e os teores de argila responderam por cerca de 63% da sua variação. Os valores de Kd de Cr apresentaram correlação inversa com o pH, principalmente na análise conjunta com os teores de argila, e 61% da sua variação foi explicada por estas variáveis.
Title in English
Distribution coefficient (KD) of heavy metals in soils of the State of São Paulo.
Keywords in English
distribution coefficient
heavy metals
tropical soils
Abstract in English
Disposal of solid residues and application of pesticides and fertilizers can lead to an increase in the concentration of heavy metals in soils and groundwater. The legislation on heavy metals nearly always refers to the total contents of these elements; however, an evaluation of their hazard potential and toxicity requires an assessment of the metal fraction that is mobile and possibly bioavailable. A few numerical parameters have been used as a foundation to make decisions and to focus on prevention or remediation strategies in contaminated areas. The solid-solution distribution coefficient (Kd), defined as the relation between metal concentrations that are adsorbed and those present in the solution, allows a comparison between the behavior of elements in different systems. Environmental protection agencies use generic Kd values found in bibliographic references; these values are often obtained under distinct conditions from those found in the tropical region, and may lead to an erroneous hazard estimates. Thus, it becomes clearly necessary to obtain Kd values that will validate these contamination estimates or provide guidance for intervention strategies in already contaminated areas. The objectives of this work were to evaluate heavy metal retention in 30 representative soils of the State of São Paulo, based on a quantification of distribution coefficient values (Kd) and their relation with soil attributes, such as pH, CEC and clay contents, organic matter, and various forms of Fe, Al, and Mn oxides. The distribution coefficients were obtained from linear adsorption isotherms, constructed after the addition of 0.1; 0.5; 1.0; 2.5; and 5.0 mg L-1 Cd, Co, Cr, Cu, Ni, Pb, and Zn, in batch-type experiments. The smallest variations in Kd value were recorded for Pb (one order of magnitude - 121 to 7,020 L kg-1) and Ni (two orders of magnitude - 6 to 998 L kg-1), while variations indicating four orders of magnitude were observed for Cd (7-14,339 L kg-1), Co (2 - 34,473 L kg-1), and Cr (1 - 21,267 L kg-1). Zinc distribution coefficients were between 5 and 123,849 L kg-1, with a variation of five orders of magnitude. The values herein obtained were similar to those that have been used by CETESB, except for Cr and Ni. The following order of affinity was obtained: Pb>>>Cu>>Cd>Zn≅Ni≅Cr>Co. More than 55% of the variation in distribution coefficients for metallic cations of the groups IIB (Cd and Zn) and VIIIB (Co and Ni) were explained by pH. In the joint analysis, CEC and pH explained about 80% of the variation in Kd values for Cd, Co, and Ni, and showed that nonspecific adsorption mechanisms are involved in the retention of these elements. Regarding the distribution coefficients for Cu and Pb, pH and clay content accounted for about 63% of the variation. Kd values for Cr showed an inverse correlation with pH, especially in the joint analysis with clay contents, and 61% of the variation were explained by these variables.
 
WARNING - Viewing this document is conditioned on your acceptance of the following terms of use:
This document is only for private use for research and teaching activities. Reproduction for commercial use is forbidden. This rights cover the whole data about this document as well as its contents. Any uses or copies of this document in whole or in part must include the author's name.
marcio.pdf (3.17 Mbytes)
Publishing Date
2005-06-15
 
WARNING: Learn what derived works are clicking here.
All rights of the thesis/dissertation are from the authors
CeTI-SC/STI
Digital Library of Theses and Dissertations of USP. Copyright © 2001-2024. All rights reserved.